ProgDVB crashes when viewing 3w

tranc3rooney

Registered
Messages
4
It crashes every time and I have to reset so it doesn't mess up the configuration.
Sometimes it crashes on 7.2w.
Reception is abysmal on both.
Any suggestion is more than welcome.
 

barney115

Donating Member
Staff member
Administrator
Messages
24,681
IT Will happen when Signal is below threshold
3°W however usually gives good signals especially on active feeds so i do not really understand why this would happen other than due to far too low signal as i do only get crash when my TBS can not lock a signal for more than 15sec
but you say Reception is abysmal on both sats so only solution your likely to get is to improve signal on both Sats ..BUT 7.3W is not a good sat for me i get only 6-7db depending on your location you probably should get more than 10db which is enuff to ensure you will not get crashes and 3°W is hard to lock when no active feeds are around so not ideal to try align your dish with 3W better trying on 7.3W
your issues is nothing to do with ProgDVB but more to do with weak signal strength on your dish .
 
Top