|
#1
|
|||
|
|||
![]() I am new to this, how do I install on VU+ Ultimo?, I am trying to install using FTP and it won't log on. I am using File Zila(FZ) on Windows 7 and my VU IP as host add and SFTP (ssh file transfer protocol). Logon is normal. User is the name i use on Network Browse & mountpoints (CIFS hard-disk) and the password. When I click connect on FZ it says open "my [email protected] my VU IP add.........." 22 then it says PASS after that it says authentication failed, critical error and could not connect to server. Where am I going wrong??
|
#2
|
||||
|
||||
![]() You need to change from SFTP to just FTP (which will also change port from 22 to 21), username= root and password= blank (ie no password), as long as your IP address is right this should then connect fine.
__________________
Sat-Shop.co.uk or Lavatronics reseller customer and looking for help with ViX4E2PROJECT? Contact me on Skype - CLICK HERE to add me! www.Sat-Shop.co.uk- UK and Europe retail hardware supply and support PLEASE NOTE DIRECT RETAIL SUPPORT IS NO LONGER AVAILABLE ON SKYPE - DOWNLOADS AND TUTORIALS ARE STILL AVAILABLE TO ALL |
#4
|
||||
|
||||
![]() now you have to install it by remote button ( manual install ) ( color depend from image that you are using )
|
#5
|
|||
|
|||
![]() black hole
|
#6
|
||||
|
||||
![]() Press green the yellow for addons panel then manual install.
__________________
![]() VU+ Duo2 Wetek Play Cloud Ibox 3 Openbox S6000 HD SIM 2.1 DM800SE SIM 2.1 DM500HD Estar V3 DM800SE VU+ Solo DM8000 Clone DM800HD Original TM9101 DS-CVS Dual Boot, jiboot, EDG Nemesis 4.2, Nabilo Darkstar |
The Following User Says Thank You to Ferret For This Useful Post: | ||
buio2005 (29-07-2012) |
#7
|
||||
|
||||
![]() Have found this won't often sometimes correctly on a few different firmware versions just by using the .ipk and manual install option via the menu, if this applies to you then you need to use either telnet to force the install or DCC to install the .ipk file, the other important bit is to give the receiver a full reboot after install (power off, leave a few seconds, power on) and it should be there.
__________________
Sat-Shop.co.uk or Lavatronics reseller customer and looking for help with ViX4E2PROJECT? Contact me on Skype - CLICK HERE to add me! www.Sat-Shop.co.uk- UK and Europe retail hardware supply and support PLEASE NOTE DIRECT RETAIL SUPPORT IS NO LONGER AVAILABLE ON SKYPE - DOWNLOADS AND TUTORIALS ARE STILL AVAILABLE TO ALL |
The Following User Says Thank You to Sat-Shop For This Useful Post: | ||
buio2005 (29-07-2012) |
#8
|
||||
|
||||
![]() Think the main issue is installing over older versions
However if you do have a install issue then this is the telnet command to use after transfering the ipk to the tmp folder opkg install -force-overwrite /tmp/enigma2-plugin-extensions-tspanel_6.1_mipsel.ipk The above obviously works for the latest version if your using a older version just change the version number in the command or use *
__________________
![]() VU+ Duo2 Wetek Play Cloud Ibox 3 Openbox S6000 HD SIM 2.1 DM800SE SIM 2.1 DM500HD Estar V3 DM800SE VU+ Solo DM8000 Clone DM800HD Original TM9101 DS-CVS Dual Boot, jiboot, EDG Nemesis 4.2, Nabilo Darkstar |
#9
|
||||
|
||||
![]() If you have an older version, you can just do an update it, as shown in the picture.
![]() If there is no plug-in vehicle, http://narod.ru/disk/58166119001.c7f...206.1.rar.html then take away and on the way usr/lib/enigma2/python/plygins / exstensions - zakinte sdelalyte here and reboot. And you have the menu will plug the TC. |
#10
|
||||
|
||||
![]() TS panel uninstall itself if u click uninstaller (inside TS panel) > uninstall package > from list choose enigma2-TS panel to uninstall it , then it is done & restart ur e2 , u will not find it anymore , so u can install after that any version u like by diff ways but i would prefer via telnet
|
The Following User Says Thank You to fankoosh For This Useful Post: | ||
buio2005 (29-07-2012) |
![]() |
Thread Tools | |
Display Modes | |
|
|