AFN Oscam Chat Thread Topic

P

paul68

Registered
Messages
107
@Dxdy

I 've read the thread , i've the issue that ,i can see Afn , but not discovery at 4,8.

I'll some some test ,but if i have understand,if the oscam decoding
Afn, can't on discovery.

I thought that the decoder of the last generation could decoding ALL the channel in power vu.

Your configuration doesn't start and work, the oscam. (Open atv 6.2):mad:

Let me know my friend what do you think. :thum:

paul
 
Last edited:
D

dxdy

VIP
Messages
669
it's important how you set oscam configs, is not all receivers (and images) same and you must setup oscam. here is all config which use on Zgemma H7.S with openATV 6.2 image

oscam.server config....
[reader]
label = emulator
protocol = emu
device = emulator
services = !afn
caid = 090F,0500,1801,0604,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
emu_datecodedenabled = 1

[reader]
label = AFN
protocol = emu
device = Emulator
services = afn
cacheex = 1
caid = 0E00
ecmwhitelist = 0E00:99
detect = cd
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
Click to expand...


oscam.services
[afn]
caid = 0E00
provid = 000000
srvid = 0066,0067,0068,0069,006A,006B,006C,006D
Click to expand...

oscam.conf
[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
#or extended_cw_api = 2 depend to your receiver
boxtype = dreambox
Click to expand...

user.ini
[account]
user = dvbapiau
monlevel = 4
au = 1
group = 1,2,3,4,5
Click to expand...


notice:
for AU working on PowerVU channels, also is important to have Softcam.Key file with valid EMM keys. i use enigma1969 softcam key...
 
D

dxdy

VIP
Messages
669
it's important how you set oscam configs, is not all receivers (and images) same and you must setup oscam. here is all config which use on Zgemma H7.S with openATV 6.2 image

oscam.server config....
[reader]
label = emulator
protocol = emu
device = emulator
services = !afn
caid = 090F,0500,1801,0604,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
emu_datecodedenabled = 1

[reader]
label = AFN
protocol = emu
device = Emulator
services = afn
cacheex = 1
caid = 0E00
ecmwhitelist = 0E00:99
detect = cd
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
Click to expand...


oscam.services
[afn]
caid = 0E00
provid = 000000
srvid = 0066,0067,0068,0069,006A,006B,006C,006D
Click to expand...

oscam.conf
[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
#or extended_cw_api = 2 depend to your receiver
boxtype = dreambox
Click to expand...

user.ini
[account]
user = dvbapiau
monlevel = 4
au = 1
group = 1,2,3,4,5
Click to expand...


also, if you need, use Satvenus Panel v7.1.4 and install oscam 11434 (not r0, choose oscam for image) from there http://www.sat-universe.com/showthread.php?t=282230 (use link to download 7.1.4 version)


notice:
for AU working on PowerVU channels, also is important to have Softcam.Key file with valid EMM keys. i use enigma1969 softcam key... here in attachment, all Discovery and AFN keys is latest and you can check if working for you
 
Last edited:
P

paul68

Registered
Messages
107
dxdy said:
it's important how you set oscam configs, is not all receivers (and images) same and you must setup oscam. here is all config which use on Zgemma H7.S with openATV 6.2 image

oscam.server config....



oscam.services


oscam.conf


user.ini



also, if you need, use Satvenus Panel v7.1.3 and install oscam 11434 (not r0, choose oscam for image) from there http://www.sat-universe.com/showthread.php?t=282230 (use link to download 7.1.3 version)


notice:
for AU working on PowerVU channels, also is important to have Softcam.Key file with valid EMM keys. i use enigma1969 softcam key... here in attachment, all Discovery and AFN keys is latest and you can check if working for you
Click to expand...

*****************************************
*****************************************
Ok, ok
Now everything's fine!:thum:

As a fool I had deleted the softcam in Usr / key.!:rolleyes:
I had left only the one in etc / tuxbox / config

Well your config is a bomb, even in the Octagon goes like a missile !!!

Thanks Dxdy, always kind! I embrace you from Italy

Paul:57:
 
P

paul68

Registered
Messages
107
Hi

There is someone who can check if with this configuration Oscam,can open a channell in Biss ?

Because not work !

I've installed another oscam ,and work.

Tomorrow we speak better ..Good night :thum:
 
K

karlnapf10

Registered
Messages
4
AFN is changing keys after some hours, so we often must update our softcam.key. we can get these keys here in section keys-powervu. but where do those guys there posting the keys get them from ? they have autoupdate, i guess. how to do this ?
 
O

ooOO_SORGOS_OOoo

karlnapf10 said:
AFN is changing keys after some hours, so we often must update our softcam.key. we can get these keys here in section keys-powervu. but where do those guys there posting the keys get them from ? they have autoupdate, i guess. how to do this ?
Click to expand...


Oscam emu + softcam. Key in emm key auto updating
 
D

dxdy

VIP
Messages
669
karlnapf10 said:
AFN is changing keys after some hours, so we often must update our softcam.key. we can get these keys here in section keys-powervu. but where do those guys there posting the keys get them from ? they have autoupdate, i guess. how to do this ?
Click to expand...

read my post 203
 
T

tuvalo

Registered
Messages
230
You've forgot to add to reader config caid = 2600. Otherwise it doesn't open biss keys -> rejected reader.
 
D

dxdy

VIP
Messages
669
cockta said:
You've forgot to add to reader config caid = 2600. Otherwise it doesn't open biss keys -> rejected reader.
Click to expand...

i not forgot, this is only PowerVU and AFN config, not ALL emu config... i have for my use different reader for BISS only from constant.cw file because BISS working much better...
 
M

marjanen

Registered
Messages
276
Mine Vu ultimo is reading the keys i can see, but still black screen nor audio.
I copied all the oscam setups. Any idea what i´m doing wrong?

Oscam I use is: OSCam: 1.20-HPB-r797-EMU-r447-770 - Build: r11424
 
D

dxdy

VIP
Messages
669
marjanen said:
Mine Vu ultimo is reading the keys i can see, but still black screen nor audio.
I copied all the oscam setups. Any idea what i´m doing wrong?

Oscam I use is: OSCam: 1.20-HPB-r797-EMU-r447-770 - Build: r11424
Click to expand...

you use old 11424 version... you must use at least 11434 r772 version becase older than this dont have new hash for AFN

nobody read post posted before. if you dont know where to download oscam, use Satvenus Panel v7.1.4 or 7.1.5 http://www.sat-universe.com/showthread.php?t=282230 (look on signature of first post, there is link for download)
 
P

paul68

Registered
Messages
107
Hi
Sorry,but Afn is down again?:confused:

The rest the channel are ok and update.!

***********************

Sorry i've edit my post.

Now is ok but it has take more time to update the key:rolleyes:
 
Last edited:
L

Lav

Registered
Messages
257
yes, AFN is running fine ,
my OSCam: 1.20_svn Build: r11436
autoroll emm is okk

active keys is here http://www.sat-universe.com/showpost.php?p=2036943464&postcount=1003



Bez-naslova.png
 
You must log in or register to reply here.
Top