Q-box images(Sif,Avalon,Original)

Status
Not open for further replies.

vegeku90

Registered
Messages
1,586
thank you mate:)

and this is the first emu image for qbox

Qbox_Emu_Backup_21052008

First emu image for QBOX ONE

Instructions:

1st Start QBOX Updater
2nd Connect Box by Lan and null modem cable
3rd Set Com port and IP in the QBOX Updater
4th Press button Backup Restore and select image
5th Confirm Queries with "yes"
6th After successfull flashing restart QBOX with button reboot

have fun


Only files are allowed here
 
Last edited:

sonic67

Registered
Messages
208
Qbox Orginal Image 1.3.0

New Qbox Orginal Image.1.3.0



- wlan fixed incl. dhcp. (no encryption at the moment)
- Use USB to create backups
- memory-bug fixed
- use lan to flash your qbox
 
Last edited:

vegeku90

Registered
Messages
1,586
1.3.0b back-up

Small update:

diseqc trialfeed: set with your own option
settinglist motor (so you have all that you need)
set lan with your own IP parametres
micro emu switcher (press blue key on the remote)_ Tnx to"Hot Tuna Group"
hacksatv9a key downloader (press blue key on the remote and have fun)

thx Valmont
 

SANTO_DOMINGO

Registered
Messages
479
Satfreaks QboxOne Backup-Projekt

First Satfreaks-Backup for duolabs Qbox One.

New in this file:

* CCcam 2.0.9 fix (just upload your own CCcam.cfg)
* CCcam Info available in Plugins-Menü
* Mgcamd 1.30d fixed and works
* Satfreaks Keyupdater included
* All Keys and cfg's included, ready to go
* Astra/Hotbird Settings with many favorites
* Some minor bugs fixed

Have Fun!
MMfreak
 

marce

VIP
Messages
7,115
Q-Box Emu Image Latest..

Q-ACTIVE 'FREEDOM ONE' 05 July 08

Neues Emu Backup von sataid.

Best used with a Motorised setup set, using the DISEqC 1.2 option.

To load the image, open QBox Updater and click Restore Backup,
when re-booting the QBox use the rocker switch on the rear of the receiver to turn it off, and then wait for a minimum of 30 seconds before turning back on.

There will be a delay of approx 1 minute, after the boot logo has been displayed, before you get any activity on your TV, so just be patient.

The default satellite is: Astra 1 [19.2e]
BBC World is the default channel on startup.

All satellites from 57 east to 43 west are covered.

Selecting Emu's:
First click the Blue button then click on Emustarter 1.1
to access Conax click on the Red button or highlight and click UNDERW

For DigiTV, Pr*****e, Polsat etc, just click on the Blue button in Emustarter, or highlight and click Cccam

To activate the Emu without waiting, go directly back into the Emustarter options, and highlight and click ENIGMA, after a short pause it will restart using the selected Emu.

How To select Pr*****e Direkt channels, simply view the Pr*****e Direkt Portal channel, and press the green button, more info regarding this can be found here:
 

k@lkov

Super VIP
Messages
10,003
Napo Image QBOX 130.2

Napo Image QBOX 130.2
Code:
update settings DF 05/07-13/19
update hacksatv9
mgcamd 1.30d
microemuv1.1
altre fix minori
 

k@lkov

Super VIP
Messages
10,003
Q-Active Freedom Five

Q-Active Freedom Five
Code:
14-07-08
Code:
Best used with a Motorised setup set, using the DISEqC 1.2 option.
All satellites from 80east to 45west are included.

[B]How to Install the Backup Image:[/B]
To load the image, open QBox Updater and click Restore Backup,
when re-booting the QBox use the rocker switch on the rear of 
the receiver to turn it off, and then wait for a minimum of 30 
seconds before turning back on.

After the boot logo has been displayed, there will be a delay of upto
1 minute, before you get any activity on your TV, so just be patient.

[B]Default Settings:[/B]
The default satellite is: Astra 1 [19.2e]
BBC World is the default channel on startup.
CCcam is the default Emu.

[B]Selecting Emu's:[/B]
First click the Blue button then click on Emustarter 1.1
to access Conax or DigitALB channels, click on the Red button or highlight and click UNDERW.
For DigiTV, Premiere, Polsat etc, just click on the Blue or Yellow button in Emustarter, or highlight and click CCcam or MGCamd

[B]To activate the Emu without waiting:[/B]
1 .. Go directly back into the Emustarter options, and highlight and click ENIGMA, after a short pause it will restart using the selected Emu.
2 .. Change channel, and that will activate the selected Emu.

[B]Updating Keys:[/B]
Click the Blue button then select HackSat Key v9b, then highlight mgcamd and the click OK button.

GBox & CCcam okay, just click the Blue button, and select whichever you require.
 
B

boxgot

Q-ACTIVE 'FREEDOM FIVE' (16 July 08) update.

Channel list updated.
Eurobird 9 now correctly configured, it seems I overlooked doing this in previous updates.

Best used with a Motorised setup set, using the DISEqC 1.2 option.
All satellites from 80east to 45west are included.

How to Install the Backup Image:
To load the image, open QBox Updater and click Restore Backup,
when re-booting the QBox use the rocker switch on the rear of the receiver to turn it off, and then wait for a minimum of 30 seconds before turning back on.


After the boot logo has been displayed, there will be a delay of upto 1 minute, before you get any activity on your TV, so just be patient.

Default Settings:
The default satellite is: Astra 1 [19.2e]
BBC World is the default channel on startup.
CCcam is the default Emu.

Selecting Emu's:
First click the Blue button then click on Emustarter 1.1
to access Conax or DigitALB channels, click on the Red button or highlight and click UNDERW.
For DigiTV, Premiere, Polsat etc, just click on the Blue or Yellow button in Emustarter, or highlight and click CCcam or MGCamd

To activate the Emu without waiting:
1 .. Go directly back into the Emustarter options, and highlight and click ENIGMA, after a short pause it will restart using the selected Emu.
2 .. Change channel, and that will activate the selected Emu.

How To select Premiere Direkt PPV channels:
Simply view the Premiere Direkt Portal channel, and press the Green button.

Updating Keys:
Click the Blue button then select HackSat Key v9b, then highlight mgcamd and the click OK button.

Card Readers:
Top Card reader only works in GBox.
Bottom Card reader working on all.

CS:
GBox & CCcam okay, just click the Blue button, and select whichever you require.

All the best
Laurals

PS:Another new version available 'Conax fixed'

Q-ACTIVE 'Freedom 6' Image [17 July 08]
 
B

boxgot

Q-Active_Freedom 6_Image_17_JULY_08.

Q-Active_Freedom 6_Image_17_JULY_08.

Q-ACTIVE 'FREEDOM SIX' (17 July 08).

Conax Fixed.

This backup image is best used with a Motorised setup set, using the DISEqC 1.2 option.

All satellites from 80east to 45west are included.

How to Install the Backup Image:
To load the image, open QBox Updater and click Restore Backup,
when re-booting the QBox use the rocker switch on the rear of the receiver to turn it off, and then wait for a minimum of 30 seconds before turning back on.

After the boot logo has been displayed, there will be a delay of upto 1 minute, before you get any activity on your TV, so just be patient.

Default Settings:
The default satellite is: Astra 1 [19.2e]
BBC World is the default channel on startup.
CCcam is the default Emu.

Selecting Emu's:
First click the Blue button then click on Emustarter 1.1
to access Conax or DigitALB channels, click on the Red button or highlight and click UNDERW.
For DigiTV, Premiere, Polsat etc, just click on the Blue or Yellow button in Emustarter, or highlight and click CCcam or MGCamd

To activate the Emu without waiting:
1 .. Go directly back into the Emustarter options, and highlight and click ENIGMA, after a short pause it will restart using the selected Emu.
2 .. Change channel, and that will activate the selected Emu.

How To select Premiere Direkt PPV channels:
Simply view the Premiere Direkt Portal channel, and press the Green button.

Updating Keys:
Click the Blue button then select HackSat Key v9b, then highlight mgcamd and the click OK button.

Card Readers:
Top Card reader only works in GBox.
Bottom Card reader working on all.

CS:
GBox & CCcam okay, just click the Blue button, and select whichever you require.

All the best
Laurals
 
B

boxgot

Q-ACTIVE 'FREEDOM SEVEN' (21 July 08)

Q-ACTIVE 'FREEDOM SEVEN' (21 July 08)

Channel List updated [19 July 08].
Boot Logo updated.

This backup image is best used with a Motorised setup set, using the DISEqC 1.2 option.

All satellites from 80east to 45west are included.

How to Install the Backup Image:
To load the image, open QBox Updater and click Restore Backup,
when re-booting the QBox use the rocker switch on the rear of the receiver to turn it off, and then wait for a minimum of 30 seconds before turning back on.

After the boot logo has been displayed, there will be a delay of upto 1 minute, before you get any activity on your TV, so just be patient.

Default Settings:
The default satellite is: Astra 1 [19.2e]
BBC World is the default channel on startup.
CCcam is the default Emu.

Selecting Emu's:
First click the Blue button then click on Emustarter 1.1
to access Conax or DigitALB channels, click on the Red button or highlight and click UNDERW.
For DigiTV, Premiere, Polsat etc, just click on the Blue or Yellow button in Emustarter, or highlight and click CCcam or MGCamd

To activate the Emu without waiting:
1 .. Go directly back into the Emustarter options, and highlight and click ENIGMA, after a short pause it will restart using the selected Emu.
2 .. Change channel, and that will activate the selected Emu.

How To select Premiere Direkt PPV channels:
Simply view the Premiere Direkt Portal channel, and press the Green button.

Updating Keys:
Click the Blue button then select HackSat Key v9b, then highlight mgcamd and the click OK button.

Card Readers:
Top & Bottom Card reader's only works only with GBox Emu.
Only the Bottom Card reader working with all other Emu's.

CS:
GBox & CCcam okay, just click the Blue button, and select whichever you require.

All the best
Laurals
 

elgeneral

Registered
Messages
7,811
Q-ACTIVE 'FREEDOM EIGHT' (26 July 08)

Q-ACTIVE 'FREEDOM EIGHT' (26 July 08)

Code:
Channel List updated.

Default Settings updated:
The default satellite is: Astra 1 [19.2e].
Russia Today is the default channel on startup.
CCcam is the default Emu.
Time Zone: GMT


Code:
h**p://www.mediafire.com/?ntpotnpprtx

gracias laurals
 

k@lkov

Super VIP
Messages
10,003
Qbox Tools-Editors-Special plugins

Avalon for Qbox! v1.1.7
Code:
- automount for internal HDD's fixed (IDE)
- recording video to USB-Sticks fixed (PVR function)
- most USB HDD'S can be mounted now
- VLC Player now working correctly
- New Feature in Avalon Board: Parental Control
- Syslog Feature added. (check /var/etc/syslogd_script.sh)
- AddonServer improved and download window extended
- Delayer added (Beta)
- WiFi Bug fixed
- several minor bugs fixed
**********************************************************
...and many more still to come!!
 

k@lkov

Super VIP
Messages
10,003
Q-box images

vlmnt 1.4.0 backup
Code:
microemu switcher 1.1
hacksat key downloader 9a
g*ox
CCcam2.09
mgcamd 1.30d
UW 17_07
epg for s*y it channels
setting motor 020808
set satellite & lan cfg with your own
Thanks to valmont

New Qbox Orginal Image.1.4.0
Code:
[B]Last changes:[/B]
You must use the Qbox Image Updater1.0.7
- New Enigma Version
- WiFi bug fixed
 

elgeneral

Registered
Messages
7,811
Q-ACTIVE 'FREEDOM NINE'(04 August 08)

Code:
Channel List updated [03 August 08]

This backup image is best used with a Motorised setup set, using the DISEqC 1.2 option.

Based on Official Image v1.3.0.
 
At the time of posting, The Official Image v1.4.0, is unstable for use with the UnderWorld Emu, more info regarding this can be found below.

All satellites from 80east to 45west are included.
All the best
Laurals

Q-Active_Freedom 9_Image_04_August_08.zip (12.32 MB)



 
B

boxgot

SifTeam 1.9.2 Qbox One Edition

Qbox-one:
---------
Usable to flash
* Enigma of: 06.08.2008
* Linux version 2.6.17
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01


CAMBIAMENTI:
------------
1) Aggiornato il cvs al 06.08.2008
2) E' possibile impostare la dimensione dei file registrati (.TS) anche nel 500 - 5620
3) Spostato il file streamts in /var/bin (in modo che si possa sostituire con uno piu' performante)
(tutti gli ipbox, il qbox, i dream 500 e 5620)
4) Tolte le password (va' impostata da soli con il comando "passwd")
5) Negli ipbox, e il qbox, e' stato linkato in /var/lib/modules/ il modulo reiserfs.ko
(installabile da online) ..causa mancanza spazio dopo l'aggiornamento di enigma dal 21.06.2008
6) Si puo' spostare lo skin (ora e' OK, ..grazie ai consigli dell'amico Tension9000)
7) Si puo' visualizzare un'orologio nello schermo con ore,minuti,secondi
8) Aggiunto il supporto al Qbox-one della Duolabs *
9) Negli ipbox reinserito il supporto al timeshift (per test)
10) Possibilita' di attivare l'opzione "Always 16:9" in tutti i decoder
11) Si puo' visualizzare il nome del canale nello schermo

 
Last edited:

elgeneral

Registered
Messages
7,811
Q-ACTIVE 'TEUTONIC' (08 August 08)

Q-ACTIVE 'TEUTONIC' (08 August 08)

Code:
Channel List updated [03 August 08]

This backup image is best used with a Motorised setup set, using the DISEqC 1.2 option.

Based on Official Image v1.4.0.

All satellites from 80east to 45west are included. 

How to Install the Backup Image:
To load the image, open QBox Updater and click Restore Backup,
when re-booting the QBox use the rocker switch on the rear of the receiver to turn it off, and then wait for a minimum of 30 seconds before turning back on.

More info on installing a backup image can be found at:
http://sataid.com/qbox_how2_add_backup.htm

After the boot logo has been displayed, there will be a delay of upto 1 minute, during the delat the 'Duolabs QBox logo will be displayed, so you will know the loading process is active.

Default Settings:
The default satellite is: Astra 1 [19.2e] 
Russia Today is the default channel on startup
CCcam is the default Emu
Language: English
Time Zone: GMT

Selecting Emu's:
First click the Blue button then click on Emustarter 1.1
to access Conax or DigitALB channels, click on the Red button or highlight and click UNDERW.
For DigiTV, Premiere, Polsat etc, just click on the Blue or Yellow button in Emustarter, or highlight and click CCcam or MGCamd

To activate the Emu without waiting: 
1 .. Go directly back into the Emustarter options, and highlight and click ENIGMA, after a short pause it will restart using the selected Emu.
2 .. Change channel, and that will activate the selected Emu.


Q-Active_Teutonic_Image_08_August_08.zip (11.8 MB)



 
Last edited by a moderator:

vegeku90

Registered
Messages
1,586
Q-ACTIVE FREEDOM Image

Channel List updated [03 August 08]

This backup image is best used with a Motorised setup set, using the DISEqC 1.2 option.

Based on Official Image v1.4.0.

All satellites from 80east to 45west are included.

How to Install the Backup Image:
To load the image, open QBox Updater and click Restore Backup,
when re-booting the QBox use the rocker switch on the rear of the receiver to turn it off, and then wait for a minimum of 30 seconds before turning back on.

After the boot logo has been displayed, there will be a delay of upto 1 minute, during the delat the 'Duolabs QBox logo will be displayed, so you will know the loading process is active.

Default Settings:
The default satellite is: Astra 1 [19.2e]
Russia Today is the default channel on startup
CCcam is the default Emu
Language: English
Time Zone: GMT

Selecting Emu's:
First click the Blue button then click on Emustarter 1.1
to access Conax or DigitALB channels, click on the Red button or highlight and click UNDERW.
For DigiTV, Premiere, Polsat etc, just click on the Blue or Yellow button in Emustarter, or highlight and click CCcam or MGCamd

To activate the Emu without waiting:
1 .. Go directly back into the Emustarter options, and highlight and click ENIGMA, after a short pause it will restart using the selected Emu.
2 .. Change channel, and that will activate the selected Emu.
 

k@lkov

Super VIP
Messages
10,003
SifTeam 1.9.2C QBox

Code:
Usable to flash
* Enigma of: 22.06.2008
* Linux version 2.6.17
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
Code:
[B]CAMBIAMENTI:[/B]
1) *Cambiato il CVS alla versione 22.06.2008
2) E' possibile impostare la dimensione dei file registrati (.TS) anche nel 500 - 5620
3) Spostato il file streamts in /var/bin (in modo che si possa sostituire con uno piu' performante)
   (tutti gli ipbox, il qbox, i dream 500 e 5620)
4) Tolte le password (va' impostata da soli con il comando "passwd")
5) Negli ipbox, e il qbox, e' stato linkato in /var/lib/modules/ il modulo reiserfs.ko
   (installabile da online) ..causa mancanza spazio dopo l'aggiornamento di enigma dal 21.06.2008
6) Si puo' spostare lo skin (ora e' OK, ..grazie ai consigli dell'amico Tension9000)
7) Si puo' visualizzare un'orologio nello schermo con ore,minuti,secondi
8) **Aggiunto il supporto al Qbox-one della Duolabs
9) Negli ipbox reinserito il supporto al timeshift (per test)
10) Possibilita' di attivare l'opzione "Always 16:9" in tutti i decoder
11) Si puo' visualizzare il nome del canale nello schermo
12) Il mID negli ipbox viene impostato nel file /var/etc/launch (in zona riscrivibile)
13) Negli ipbox si puo' cambiare il sistema di montaggio dischi ( /var/etc/Mount.conf )
14) Si puo' cambiare/personalizzare l'ultimo logo (bild3)
15) Aumentati i pixel che si possono usare per spostare l'OSD (60)

[B]NOTE:[/B]
Per la versione ipbox-200@64mb si deve:
1) Installare l'immagine del 200 normale
2) Installare il file "serial_uboot_64.img"
..entrambi con Flashtools o Flasher


[B]Programmi:[/B]
Per avviare programmi personali, valido per tutte le immagini SifTeam: Aggiungere il comando voluto in /var/etc/rcS.d/S99user_start.sh in fondo al file (ci sono gia' presenti diversi esempi pronti all'uso, basta decommentarli rimuovendo il simbolo #)

[B]Tips:[/B]
Per entrare nel Pannello di Controllo se ci si trova nel Pannello Emu basta premere il bottone giallo, funzione aggiunta per l'uso nella WebIf.
Per aprire il menu' Script mentre ci si trova nel Pannello di Controllo basta premere lo 0 (zero).


[B]Per modificare la posizione nello schermo, della visualizzazione orario e nome canale:[/B]
Il valore verticale di default e' 80 per l'orario ..e 110 per il nome canale
Il valore orizzontale, entrambi 0
Si puo' modificare il valore verticale, da telnet:
echo 50 > /var/etc/SifTeam/conf/altOraOSD
echo 80 > /var/etc/SifTeam/conf/altCanaleOSD
Si puo' modificare il valore orizzontale, da telnet:
echo 10 > /var/etc/SifTeam/conf/oriOraOSD
echo 10 > /var/etc/SifTeam/conf/oriCanaleOSD
..in pratica legge quei file (se presenti) e usa il loro valore al posto dei default.

[B]Errori:[/B]
In caso si presenti l'errore "..curl_global_init.." con qualche plugin, dopo l'installazione del medesimo basta riavviare enigma o il decoder. (deve rileggere la nuova libreria installata dal plugin)

* Il CVS e' stato cambiato "indietro" per i problemi di compatibilita' riscontrata con l'ultimo
  ( I cambiamenti dal 22.06.2008 al 06.08.2008 sono legati al TimeShift, e tenuto conto che
  i modelli ipbox neppure lo possono usare, ho ritenuto giusto usare il 22.06.2008 )

** Il Qbox-one non ha ancora tutte le funzioni degli altri modelli, ad esempio il firewall per
   ora non funziona (altrimenti il kernel non e' compatibile con il modulo wifi della duolabs)
   ..cosi' come alcuni plugin non vanno ...diciamo work in progress ...ma e' perfettamente
   utilizzabile con le funzioni base. Forse la cosa che manca di piu' e' la funzione del tasto
   premuto per >1sec. (per piu' di un secondo), per entrare nel pannello di controllo si deve 
   passare da: tasto blu -> tasto giallo
 

k@lkov

Super VIP
Messages
10,003
Q-box images

Q-ACTIVE TEUTONIC 2
Code:
19-08-08
Code:
- Channel List updated [18 August 08] 

- This backup image is best used with a Motorised setup set, 
using the DISEqC 1.2 option.

- Based on the QBox Official Image v1.4.0.

- All satellites from 80east to 45west are included. 

[B]How to Install the Backup Image:[/B]
To load the image, open QBox Updater and click Restore Backup,
when re-booting the QBox use the rocker switch on the rear of 
the receiver to turn it off, and then wait for a minimum of 30 
seconds before turning back on.

After the boot logo has been displayed, there will be a delay of 
upto 1 minute, during the delat the 'Duolabs QBox logo will be 
displayed, so you will know the loading process is active.

[B]Default Settings:[/B]
The default satellite is: Astra 1 [19.2e] 
Russia Today is the default channel on startup
CCcam is the default Emu
Language: English
Time Zone: GMT

[B]Selecting Emu's:[/B]
First click the Blue button then click on Emustarter 1.1
to access Conax or DigitALB channels, click on the Red button 
or highlight and click UNDERW.
For DigiTV, Premiere, Polsat etc, just click on the Blue or Yellow 
button in Emustarter, or highlight and click CCcam or MGCamd

[B]To activate an Emu:[/B]
1 .. If a channel do not open within 15 seconds try the options 2 or 3 
2 .. Change channel, and that will activate the selected Emu.
3 .. Go directly back into the Emustarter options, and highlight and click 
ENIGMA, after a short pause it will restart using the selected Emu.

[B]How To select Premiere Direkt PPV channels: [/B]
Simply view the Premiere Direkt Portal channel, and press the Green button. 

[B]Updating Keys:[/B]
- Click the Blue button then select HackSat Key v9b, 
then highlight mgcamd and the click OK button.

[B]Card Readers:[/B]
Both the Top & Bottom Card reader's will only work with GBox Emu.
Only the Bottom Card reader is working with all other Emu's.

[B]CS:[/B]
GBox & CCcam okay, just click the Blue button, 
and select whichever you require.
Thanks Laurals
 
Status
Not open for further replies.
Top