Go Back   Sat Universe > Emulators & Cardservers > Files > Oscam

Note: Visitors from certain countries might see in-text advertising(underlind words in posts) or pop-under ads.
It is only shown to unregistered visitors or members that haven't made any posts. So you can easily get rid of it.

World-Of-Satellite

The LATEST OSCAM-EMU FOR VARIOUS PLATFORMS

Oscam

Reply
  #71  
Old 12-03-2017, 19:27  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
hapeba hapeba is offline
Senior Member
 
Join Date: Aug 2013
Posts: 82
Thanks: 2
Thanked 453 Times in 60 Posts
Country: Country Flag
Default THE LATEST OSCAM-EMU FOR VARIOUS PLATFORMS (Current Version: r11378 - EMU-Patch r383-739)

Special features:
==========


Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disabled-/Enabled-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - OSCamLogo with OSCamLabel (WebIf --> config --> webif --> OSCam Label)
(Example: set it to Box-Name ...)


Write channelcache and emmcache/emmstat:
Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/Dvbapi
- "Write emmcache/emmstat to file" in Config/Logging
Default for both: disabled

All three files are written to config-dir
If "emmlogdir" is defined, oscam.emmcache and oscam.emmstat are written to this defined dir.


Provider-Picons on Status-Page:
Important: For this feature you must activate the parameters "Poll (initial refresh)" and "Http show Picons".
Also you must copy a picon (named IC_provider.tpl) to template-dir (parameter "Http tpl") or picons-dir (if defined - parameter "Path for picons")


User specific loadbalancer parameters:

User force always reopen:
Webif -> Config -> Loadbalancer -> User force always reopen
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user = 0 or 1


Only if count reached lb_min_ecmcount:
Webif -> Config -> Loadbalancer -> only if count reached lb_min_ecmcount
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user_lb_min = 0 or 1


General date format: dd.mm.yyyy


Support tongfang version 3 NTIC2


Support ORF ICE Card with Caid 0650
(complete Austria-SAT with "Irdeto"-Mode)


WebIf - Special WebIf-Design included



Tandberg config:
===========

Keys in SoftCam.Key:

T <entitlement> 01 <key>

for example (entitlement = 1234):
T 00001234 01 1122334455667788

leading zeros maybe be skipped. same key as above:
T 1234 01 1122334455667788

AU keys:
for old key set:
T <key index (hex)> MK <key>

64 keys are needed:

T 40 MK 1122334455667788
T 41 MK 1122334455667788
...
T 7F MK 1122334455667788

for new key set:
T <key index (hex)> MK01 <key>

64 keys are needed:

T 40 MK01 1122334455667788
T 41 MK01 1122334455667788
...
T 7F MK01 1122334455667788



Oscam Complete - Minimal:
==================


- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)

Now with GBox !!!
With Coolstream and Coolstream HD2


Additional for "solo4k", "arm_v7", "raspb_armv7", "arm_v8", "arm_dream", "arm_dream", "mipsel", "mipsoe20", "openpli40", "openwrt1209aa", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60", "fritz74xxOS62" and "fritz74xxOS65" a binary with "libusb".
Additional for "arm_v7" and "raspb_armv7" a binary with "pcsc".
Additional for "arm_v7", "arm", "raspb_armv7", "raspb_hard", "raspb_soft", "syn-atom", "openwrt24", "openwrt26", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "raspb_hard", "raspb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "solo4k", "fritz71xx", "mipsoe20" and "openpli40" a binary with "libusb static".
Additional for "arm_v8" a binary with "dvbapi" and "libusb".
Additional for "raspb_armv7" a binary with "dvbapi", "libusb" and "pcsc".



Explanation of sub-directories:
===================


Part1:
build_dir_arm_cortex_a9 = Cortex A9 CPU (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (WNR3500L)
build_dir_fonera = Fonera Router
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)

Part2:
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/820/7020HD/7025(+)/7080/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_openpli40 = OpenPLI 4.0 All Mipsel (OE 2.2 and higher, Black Hole 3.0 and higher)
build_dir_powerpc = DMM 600/7000/7020si (PPC Tuxbox)
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini

Part3:
build_dir_arm_v7 = ARM v7 DS114/DS115j/DS213j/DS214 and many more
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_marv_7823 = Synology Marvell Armada XP MV7823x
build_dir_mca = Matrix Cam Air
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)

Part4:
build_dir_cool1 = Coolstream
build_dir_cool2 = Coolstream HD2

build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_fritz74xxOS65 = Fritzbox 74XX OS6.5
build_dir_sheevaplug = Sheevaplug

Part5:
build_dir_raspb_armv7 = Raspberry Pi 2, Banana Pi M2, WeTekPlay
build_dir_raspb_hard = Raspberry Pi HardFPU
build_dir_raspb_soft = Raspberry Pi SoftFPU
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_solo4k = Vu+ Solo 4k
build_dir_syn_atom = Synology with Atom CPU
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)

Part6:
build_dir_arm_v8 = ARM v8 OrdoidC2 (aarch64 LibreELEC)
build_dir_arm_dream = ARM Dreambox (DMM 900UHD, Mutant HD51/AX HD51)
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)
Reply With Quote
The Following 9 Users Say Thank You to hapeba For This Useful Post:
christos4 (12-03-2017), dahaka (12-03-2017), femi (25-03-2017), marluck (18-03-2017), midea1381 (13-03-2017), Rickk (22-09-2017), rmiino (14-03-2017), taurinus (13-03-2017), Woffer (29-09-2017)
  #72  
Old 19-03-2017, 13:26  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
hapeba hapeba is offline
Senior Member
 
Join Date: Aug 2013
Posts: 82
Thanks: 2
Thanked 453 Times in 60 Posts
Country: Country Flag
Default THE LATEST OSCAM-EMU FOR VARIOUS PLATFORMS (Current Version: r11380 - EMU-Patch r383-739)

Special features:
==========


Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disabled-/Enabled-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - OSCamLogo with OSCamLabel (WebIf --> config --> webif --> OSCam Label)
(Example: set it to Box-Name ...)


Write channelcache and emmcache/emmstat:
Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/Dvbapi
- "Write emmcache/emmstat to file" in Config/Logging
Default for both: disabled

All three files are written to config-dir
If "emmlogdir" is defined, oscam.emmcache and oscam.emmstat are written to this defined dir.


Provider-Picons on Status-Page:
Important: For this feature you must activate the parameters "Poll (initial refresh)" and "Http show Picons".
Also you must copy a picon (named IC_provider.tpl) to template-dir (parameter "Http tpl") or picons-dir (if defined - parameter "Path for picons")


User specific loadbalancer parameters:

User force always reopen:
Webif -> Config -> Loadbalancer -> User force always reopen
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user = 0 or 1


Only if count reached lb_min_ecmcount:
Webif -> Config -> Loadbalancer -> only if count reached lb_min_ecmcount
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user_lb_min = 0 or 1


General date format: dd.mm.yyyy


Support tongfang version 3 NTIC2


Support ORF ICE Card with Caid 0650
(complete Austria-SAT with "Irdeto"-Mode)


WebIf - Special WebIf-Design included



Tandberg config:
===========

Keys in SoftCam.Key:

T <entitlement> 01 <key>

for example (entitlement = 1234):
T 00001234 01 1122334455667788

leading zeros maybe be skipped. same key as above:
T 1234 01 1122334455667788

AU keys:
for old key set:
T <key index (hex)> MK <key>

64 keys are needed:

T 40 MK 1122334455667788
T 41 MK 1122334455667788
...
T 7F MK 1122334455667788

for new key set:
T <key index (hex)> MK01 <key>

64 keys are needed:

T 40 MK01 1122334455667788
T 41 MK01 1122334455667788
...
T 7F MK01 1122334455667788



Oscam Complete - Minimal:
==================


- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)

Now with GBox !!!
With Coolstream and Coolstream HD2


Additional for "solo4k", "arm_v7", "raspb_armv7", "arm_v8", "arm_dream", "arm_dream", "mipsel", "mipsoe20", "openpli40", "openwrt1209aa", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60", "fritz74xxOS62" and "fritz74xxOS65" a binary with "libusb".
Additional for "arm_v7" and "raspb_armv7" a binary with "pcsc".
Additional for "arm_v7", "arm", "raspb_armv7", "raspb_hard", "raspb_soft", "syn-atom", "openwrt24", "openwrt26", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "raspb_hard", "raspb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "solo4k", "fritz71xx", "mipsoe20" and "openpli40" a binary with "libusb static".
Additional for "arm_v8" a binary with "dvbapi" and "libusb".
Additional for "raspb_armv7" a binary with "dvbapi", "libusb" and "pcsc".



Explanation of sub-directories:
===================


Part1:
build_dir_arm_cortex_a9 = Cortex A9 CPU (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (WNR3500L)
build_dir_fonera = Fonera Router
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)

Part2:
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/820/7020HD/7025(+)/7080/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_openpli40 = OpenPLI 4.0 All Mipsel (OE 2.2 and higher, Black Hole 3.0 and higher)
build_dir_powerpc = DMM 600/7000/7020si (PPC Tuxbox)
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini

Part3:
build_dir_arm_v7 = ARM v7 DS114/DS115j/DS213j/DS214 and many more
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_marv_7823 = Synology Marvell Armada XP MV7823x
build_dir_mca = Matrix Cam Air
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)

Part4:
build_dir_cool1 = Coolstream
build_dir_cool2 = Coolstream HD2

build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_fritz74xxOS65 = Fritzbox 74XX OS6.5
build_dir_sheevaplug = Sheevaplug

Part5:
build_dir_raspb_armv7 = Raspberry Pi 2, Banana Pi M2, WeTekPlay
build_dir_raspb_hard = Raspberry Pi HardFPU
build_dir_raspb_soft = Raspberry Pi SoftFPU
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_solo4k = Vu+ Solo 4k
build_dir_syn_atom = Synology with Atom CPU
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)

Part6:
build_dir_arm_v8 = ARM v8 OrdoidC2 (aarch64 LibreELEC)
build_dir_arm_dream = ARM Dreambox (DMM 900UHD, Mutant HD51/AX HD51)
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)
Reply With Quote
The Following 13 Users Say Thank You to hapeba For This Useful Post:
AbeamStart (21-04-2017), adrik (29-03-2017), andres66 (20-03-2017), ciccioscartazza (18-05-2017), dahaka (19-03-2017), djcornel (30-03-2017), femi (29-04-2017), harshy (25-03-2017), pepehabana (05-04-2017), pilisu (03-04-2017), Rickk (22-09-2017), rmiino (10-05-2017), yogipiti75 (31-03-2017)
  #73  
Old 02-06-2017, 11:53  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
hapeba hapeba is offline
Senior Member
 
Join Date: Aug 2013
Posts: 82
Thanks: 2
Thanked 453 Times in 60 Posts
Country: Country Flag
Default THE LATEST OSCAM-EMU FOR VARIOUS PLATFORMS (Current Version: r11384 - EMU-Patch r383-739)

Special features:
==========


Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disabled-/Enabled-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - OSCamLogo with OSCamLabel (WebIf --> config --> webif --> OSCam Label)
(Example: set it to Box-Name ...)


Write channelcache and emmcache/emmstat:
Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/Dvbapi
- "Write emmcache/emmstat to file" in Config/Logging
Default for both: disabled

All three files are written to config-dir
If "emmlogdir" is defined, oscam.emmcache and oscam.emmstat are written to this defined dir.


Provider-Picons on Status-Page:
Important: For this feature you must activate the parameters "Poll (initial refresh)" and "Http show Picons".
Also you must copy a picon (named IC_provider.tpl) to template-dir (parameter "Http tpl") or picons-dir (if defined - parameter "Path for picons")


User specific loadbalancer parameters:

User force always reopen:
Webif -> Config -> Loadbalancer -> User force always reopen
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user = 0 or 1


Only if count reached lb_min_ecmcount:
Webif -> Config -> Loadbalancer -> only if count reached lb_min_ecmcount
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user_lb_min = 0 or 1


General date format: dd.mm.yyyy


Support tongfang version 3 NTIC2


Support ORF ICE Card with Caid 0650
(complete Austria-SAT with "Irdeto"-Mode)


WebIf - Special WebIf-Design included



Tandberg config:
===========

Keys in SoftCam.Key:

T <entitlement> 01 <key>

for example (entitlement = 1234):
T 00001234 01 1122334455667788

leading zeros maybe be skipped. same key as above:
T 1234 01 1122334455667788

AU keys:
for old key set:
T <key index (hex)> MK <key>

64 keys are needed:

T 40 MK 1122334455667788
T 41 MK 1122334455667788
...
T 7F MK 1122334455667788

for new key set:
T <key index (hex)> MK01 <key>

64 keys are needed:

T 40 MK01 1122334455667788
T 41 MK01 1122334455667788
...
T 7F MK01 1122334455667788



Oscam Complete - Minimal:
==================


- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)

Now with GBox !!!
With Coolstream and Coolstream HD2


Additional for "solo4k", "arm_v7", "raspb_armv7", "arm_v8", "arm_dream", "arm_dream", "mipsel", "mipsoe20", "openpli40", "openwrt1209aa", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60", "fritz74xxOS62" and "fritz74xxOS65" a binary with "libusb".
Additional for "arm_v7" and "raspb_armv7" a binary with "pcsc".
Additional for "arm_v7", "arm", "raspb_armv7", "raspb_hard", "raspb_soft", "syn-atom", "openwrt24", "openwrt26", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "raspb_hard", "raspb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "solo4k", "fritz71xx", "mipsoe20" and "openpli40" a binary with "libusb static".
Additional for "arm_v8" a binary with "dvbapi" and "libusb".
Additional for "raspb_armv7" a binary with "dvbapi", "libusb" and "pcsc".



Explanation of sub-directories:
===================


Part1:
build_dir_arm_cortex_a9 = Cortex A9 CPU (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (WNR3500L)
build_dir_fonera = Fonera Router
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)

Part2:
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/820/7020HD/7025(+)/7080/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_openpli40 = OpenPLI 4.0 All Mipsel (OE 2.2 and higher, Black Hole 3.0 and higher)
build_dir_powerpc = DMM 600/7000/7020si (PPC Tuxbox)
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini

Part3:
build_dir_arm_v7 = ARM v7 DS114/DS115j/DS213j/DS214 and many more
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_marv_7823 = Synology Marvell Armada XP MV7823x
build_dir_mca = Matrix Cam Air
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)

Part4:
build_dir_cool1 = Coolstream
build_dir_cool2 = Coolstream HD2

build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_fritz74xxOS65 = Fritzbox 74XX OS6.5
build_dir_sheevaplug = Sheevaplug

Part5:
build_dir_raspb_armv7 = Raspberry Pi 2, Banana Pi M2, WeTekPlay
build_dir_raspb_hard = Raspberry Pi HardFPU
build_dir_raspb_soft = Raspberry Pi SoftFPU
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_solo4k = Vu+ Solo 4k
build_dir_syn_atom = Synology with Atom CPU
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)

Part6:
build_dir_arm_v8 = ARM v8 OrdoidC2 (aarch64 LibreELEC)
build_dir_arm_dream = ARM Dreambox (DMM 900UHD, Mutant HD51/AX HD51)
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)
Reply With Quote
The Following 12 Users Say Thank You to hapeba For This Useful Post:
BadBoyXxX (06-06-2017), crosle (09-07-2017), kikkadipara (06-07-2017), M0d3m (17-09-2017), marluck (04-06-2017), midea1381 (06-06-2017), mrramo (15-07-2017), nicol-one (06-06-2017), pdetef (11-08-2017), Rickk (06-06-2017), rmiino (13-09-2017), tent (15-08-2017)
  #74  
Old 16-09-2017, 11:42  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
hapeba hapeba is offline
Senior Member
 
Join Date: Aug 2013
Posts: 82
Thanks: 2
Thanked 453 Times in 60 Posts
Country: Country Flag
Default THE LATEST OSCAM-EMU FOR VARIOUS PLATFORMS (Current Version: r11391 - EMU-Patch r391-745)

NEW:

- EMU r391-745 (Updates for PowerVu Crypto-System)




Special features:
==========


Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disabled-/Enabled-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - OSCamLogo with OSCamLabel (WebIf --> config --> webif --> OSCam Label)
(Example: set it to Box-Name ...)


Write channelcache and emmcache/emmstat:
Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/Dvbapi
- "Write emmcache/emmstat to file" in Config/Logging
Default for both: disabled

All three files are written to config-dir
If "emmlogdir" is defined, oscam.emmcache and oscam.emmstat are written to this defined dir.


Provider-Picons on Status-Page:
Important: For this feature you must activate the parameters "Poll (initial refresh)" and "Http show Picons".
Also you must copy a picon (named IC_provider.tpl) to template-dir (parameter "Http tpl") or picons-dir (if defined - parameter "Path for picons")


User specific loadbalancer parameters:

User force always reopen:
Webif -> Config -> Loadbalancer -> User force always reopen
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user = 0 or 1


Only if count reached lb_min_ecmcount:
Webif -> Config -> Loadbalancer -> only if count reached lb_min_ecmcount
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user_lb_min = 0 or 1


General date format: dd.mm.yyyy


Support tongfang version 3 NTIC2


Support ORF ICE Card with Caid 0650
(complete Austria-SAT with "Irdeto"-Mode)


WebIf - Special WebIf-Design included



Tandberg config:
===========

Keys in SoftCam.Key:

T <entitlement> 01 <key>

for example (entitlement = 1234):
T 00001234 01 1122334455667788

leading zeros maybe be skipped. same key as above:
T 1234 01 1122334455667788

AU keys:
for old key set:
T <key index (hex)> MK <key>

64 keys are needed:

T 40 MK 1122334455667788
T 41 MK 1122334455667788
...
T 7F MK 1122334455667788

for new key set:
T <key index (hex)> MK01 <key>

64 keys are needed:

T 40 MK01 1122334455667788
T 41 MK01 1122334455667788
...
T 7F MK01 1122334455667788



Oscam Complete - Minimal:
==================


- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)

Now with GBox !!!
With Coolstream and Coolstream HD2


Additional for "solo4k", "arm_v7", "raspb_armv7", "arm_v8", "arm_dream", "arm_dream", "mipsel", "mipsoe20", "openpli40", "openwrt1209aa", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60", "fritz74xxOS62" and "fritz74xxOS65" a binary with "libusb".
Additional for "arm_v7" and "raspb_armv7" a binary with "pcsc".
Additional for "arm_v7", "arm", "raspb_armv7", "raspb_hard", "raspb_soft", "syn-atom", "openwrt24", "openwrt26", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "raspb_hard", "raspb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "solo4k", "fritz71xx", "mipsoe20" and "openpli40" a binary with "libusb static".
Additional for "arm_v8" a binary with "dvbapi" and "libusb".
Additional for "raspb_armv7" a binary with "dvbapi", "libusb" and "pcsc".



Explanation of sub-directories:
===================


Part1:
build_dir_arm_cortex_a9 = Cortex A9 CPU (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (WNR3500L)
build_dir_fonera = Fonera Router
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)

Part2:
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/820/7020HD/7025(+)/7080/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_openpli40 = OpenPLI 4.0 All Mipsel (OE 2.2 and higher, Black Hole 3.0 and higher)
build_dir_powerpc = DMM 600/7000/7020si (PPC Tuxbox)
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini

Part3:
build_dir_arm_v7 = ARM v7 DS114/DS115j/DS213j/DS214 and many more
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_marv_7823 = Synology Marvell Armada XP MV7823x
build_dir_mca = Matrix Cam Air
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)

Part4:
build_dir_cool1 = Coolstream
build_dir_cool2 = Coolstream HD2

build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_fritz74xxOS65 = Fritzbox 74XX OS6.5
build_dir_sheevaplug = Sheevaplug

Part5:
build_dir_raspb_armv7 = Raspberry Pi 2, Banana Pi M2, WeTekPlay
build_dir_raspb_hard = Raspberry Pi HardFPU
build_dir_raspb_soft = Raspberry Pi SoftFPU
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_solo4k = Vu+ Solo 4k
build_dir_syn_atom = Synology with Atom CPU
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)

Part6:
build_dir_arm_v8 = ARM v8 OrdoidC2 (aarch64 LibreELEC)
build_dir_arm_dream = ARM Dreambox (DMM 900UHD, Mutant HD51/AX HD51)
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)
Reply With Quote
The Following 4 Users Say Thank You to hapeba For This Useful Post:
dahaka (16-09-2017), Ferret (16-09-2017), Rickk (16-09-2017), vladan !! (16-09-2017)
  #75  
Old 17-09-2017, 17:49  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
hapeba hapeba is offline
Senior Member
 
Join Date: Aug 2013
Posts: 82
Thanks: 2
Thanked 453 Times in 60 Posts
Country: Country Flag
Default THE LATEST OSCAM-EMU FOR VARIOUS PLATFORMS (Current Version: r11391 - EMU-Patch r397-746)

NEW:

- EMU r397-746 (Updates for PowerVu Crypto-System)




Special features:
==========


Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disabled-/Enabled-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - OSCamLogo with OSCamLabel (WebIf --> config --> webif --> OSCam Label)
(Example: set it to Box-Name ...)


Write channelcache and emmcache/emmstat:
Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/Dvbapi
- "Write emmcache/emmstat to file" in Config/Logging
Default for both: disabled

All three files are written to config-dir
If "emmlogdir" is defined, oscam.emmcache and oscam.emmstat are written to this defined dir.


Provider-Picons on Status-Page:
Important: For this feature you must activate the parameters "Poll (initial refresh)" and "Http show Picons".
Also you must copy a picon (named IC_provider.tpl) to template-dir (parameter "Http tpl") or picons-dir (if defined - parameter "Path for picons")


User specific loadbalancer parameters:

User force always reopen:
Webif -> Config -> Loadbalancer -> User force always reopen
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user = 0 or 1


Only if count reached lb_min_ecmcount:
Webif -> Config -> Loadbalancer -> only if count reached lb_min_ecmcount
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user_lb_min = 0 or 1


General date format: dd.mm.yyyy


Support tongfang version 3 NTIC2


Support ORF ICE Card with Caid 0650
(complete Austria-SAT with "Irdeto"-Mode)


WebIf - Special WebIf-Design included



Tandberg config:
===========

Keys in SoftCam.Key:

T <entitlement> 01 <key>

for example (entitlement = 1234):
T 00001234 01 1122334455667788

leading zeros maybe be skipped. same key as above:
T 1234 01 1122334455667788

AU keys:
for old key set:
T <key index (hex)> MK <key>

64 keys are needed:

T 40 MK 1122334455667788
T 41 MK 1122334455667788
...
T 7F MK 1122334455667788

for new key set:
T <key index (hex)> MK01 <key>

64 keys are needed:

T 40 MK01 1122334455667788
T 41 MK01 1122334455667788
...
T 7F MK01 1122334455667788



Oscam Complete - Minimal:
==================


- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)

Now with GBox !!!
With Coolstream and Coolstream HD2


Additional for "solo4k", "arm_v7", "raspb_armv7", "arm_v8", "arm_dream", "arm_dream", "mipsel", "mipsoe20", "openpli40", "openwrt1209aa", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60", "fritz74xxOS62" and "fritz74xxOS65" a binary with "libusb".
Additional for "arm_v7" and "raspb_armv7" a binary with "pcsc".
Additional for "arm_v7", "arm", "raspb_armv7", "raspb_hard", "raspb_soft", "syn-atom", "openwrt24", "openwrt26", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "raspb_hard", "raspb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "solo4k", "fritz71xx", "mipsoe20" and "openpli40" a binary with "libusb static".
Additional for "arm_v8" a binary with "dvbapi" and "libusb".
Additional for "raspb_armv7" a binary with "dvbapi", "libusb" and "pcsc".



Explanation of sub-directories:
===================


Part1:
build_dir_arm_cortex_a9 = Cortex A9 CPU (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (WNR3500L)
build_dir_fonera = Fonera Router
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)

Part2:
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/820/7020HD/7025(+)/7080/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_openpli40 = OpenPLI 4.0 All Mipsel (OE 2.2 and higher, Black Hole 3.0 and higher)
build_dir_powerpc = DMM 600/7000/7020si (PPC Tuxbox)
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini

Part3:
build_dir_arm_v7 = ARM v7 DS114/DS115j/DS213j/DS214 and many more
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_marv_7823 = Synology Marvell Armada XP MV7823x
build_dir_mca = Matrix Cam Air
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)

Part4:
build_dir_cool1 = Coolstream
build_dir_cool2 = Coolstream HD2

build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_fritz74xxOS65 = Fritzbox 74XX OS6.5
build_dir_sheevaplug = Sheevaplug

Part5:
build_dir_raspb_armv7 = Raspberry Pi 2, Banana Pi M2, WeTekPlay
build_dir_raspb_hard = Raspberry Pi HardFPU
build_dir_raspb_soft = Raspberry Pi SoftFPU
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_solo4k = Vu+ Solo 4k
build_dir_syn_atom = Synology with Atom CPU
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)

Part6:
build_dir_arm_v8 = ARM v8 OrdoidC2 (aarch64 LibreELEC)
build_dir_arm_dream = ARM Dreambox (DMM 900UHD, Mutant HD51/AX HD51)
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)
Reply With Quote
The Following 8 Users Say Thank You to hapeba For This Useful Post:
BadBoyXxX (19-09-2017), dahaka (17-09-2017), harshy (17-09-2017), jovie (18-09-2017), parabolica_10 (18-09-2017), Rickk (17-09-2017), sonicss (17-09-2017), tent (20-09-2017)
  #76  
Old 20-09-2017, 14:35  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
hapeba hapeba is offline
Senior Member
 
Join Date: Aug 2013
Posts: 82
Thanks: 2
Thanked 453 Times in 60 Posts
Country: Country Flag
Default THE LATEST OSCAM-EMU FOR VARIOUS PLATFORMS (Current Version: r11391 - EMU-Patch r400-747)

NEW:

EMU r400-747
- Updates for PowerVu Crypto-System
- Add Tandberg ECM/EMM checksum validation




Special features:
==========


Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disabled-/Enabled-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - OSCamLogo with OSCamLabel (WebIf --> config --> webif --> OSCam Label)
(Example: set it to Box-Name ...)


Write channelcache and emmcache/emmstat:
Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/Dvbapi
- "Write emmcache/emmstat to file" in Config/Logging
Default for both: disabled

All three files are written to config-dir
If "emmlogdir" is defined, oscam.emmcache and oscam.emmstat are written to this defined dir.


Provider-Picons on Status-Page:
Important: For this feature you must activate the parameters "Poll (initial refresh)" and "Http show Picons".
Also you must copy a picon (named IC_provider.tpl) to template-dir (parameter "Http tpl") or picons-dir (if defined - parameter "Path for picons")


User specific loadbalancer parameters:

User force always reopen:
Webif -> Config -> Loadbalancer -> User force always reopen
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user = 0 or 1


Only if count reached lb_min_ecmcount:
Webif -> Config -> Loadbalancer -> only if count reached lb_min_ecmcount
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user_lb_min = 0 or 1


General date format: dd.mm.yyyy


Support tongfang version 3 NTIC2


Support ORF ICE Card with Caid 0650
(complete Austria-SAT with "Irdeto"-Mode)


WebIf - Special WebIf-Design included



Tandberg config:
===========

Keys in SoftCam.Key:

T <entitlement> 01 <key>

for example (entitlement = 1234):
T 00001234 01 1122334455667788

leading zeros maybe be skipped. same key as above:
T 1234 01 1122334455667788

AU keys:
for old key set:
T <key index (hex)> MK <key>

64 keys are needed:

T 40 MK 1122334455667788
T 41 MK 1122334455667788
...
T 7F MK 1122334455667788

for new key set:
T <key index (hex)> MK01 <key>

64 keys are needed:

T 40 MK01 1122334455667788
T 41 MK01 1122334455667788
...
T 7F MK01 1122334455667788



Oscam Complete - Minimal:
==================


- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)

Now with GBox !!!
With Coolstream and Coolstream HD2


Additional for "solo4k", "arm_v7", "raspb_armv7", "arm_v8", "arm_dream", "arm_dream", "mipsel", "mipsoe20", "openpli40", "openwrt1209aa", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60", "fritz74xxOS62" and "fritz74xxOS65" a binary with "libusb".
Additional for "arm_v7" and "raspb_armv7" a binary with "pcsc".
Additional for "arm_v7", "arm", "raspb_armv7", "raspb_hard", "raspb_soft", "syn-atom", "openwrt24", "openwrt26", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "raspb_hard", "raspb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "solo4k", "fritz71xx", "mipsoe20" and "openpli40" a binary with "libusb static".
Additional for "arm_v8" a binary with "dvbapi" and "libusb".
Additional for "raspb_armv7" a binary with "dvbapi", "libusb" and "pcsc".



Explanation of sub-directories:
===================


Part1:
build_dir_arm_cortex_a9 = Cortex A9 CPU (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (WNR3500L)
build_dir_fonera = Fonera Router
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)

Part2:
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/820/7020HD/7025(+)/7080/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_openpli40 = OpenPLI 4.0 All Mipsel (OE 2.2 and higher, Black Hole 3.0 and higher)
build_dir_powerpc = DMM 600/7000/7020si (PPC Tuxbox)
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini

Part3:
build_dir_arm_v7 = ARM v7 DS114/DS115j/DS213j/DS214 and many more
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_marv_7823 = Synology Marvell Armada XP MV7823x
build_dir_mca = Matrix Cam Air
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)

Part4:
build_dir_cool1 = Coolstream
build_dir_cool2 = Coolstream HD2

build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_fritz74xxOS65 = Fritzbox 74XX OS6.5
build_dir_sheevaplug = Sheevaplug

Part5:
build_dir_raspb_armv7 = Raspberry Pi 2, Banana Pi M2, WeTekPlay
build_dir_raspb_hard = Raspberry Pi HardFPU
build_dir_raspb_soft = Raspberry Pi SoftFPU
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_solo4k = Vu+ Solo 4k
build_dir_syn_atom = Synology with Atom CPU
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)

Part6:
build_dir_arm_v8 = ARM v8 OrdoidC2 (aarch64 LibreELEC)
build_dir_arm_dream = ARM Dreambox (DMM 900UHD, Mutant HD51/AX HD51)
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)
Reply With Quote
The Following 10 Users Say Thank You to hapeba For This Useful Post:
babiaceae (03-10-2017), BadBoyXxX (11-10-2017), dahaka (20-09-2017), lik (21-09-2017), master-magic (11-10-2017), pilisu (25-10-2017), Rickk (20-09-2017), vladan !! (20-09-2017), vogelman (20-09-2017), WS460 (27-09-2017)
  #77  
Old 04-11-2017, 14:36  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
hapeba hapeba is offline
Senior Member
 
Join Date: Aug 2013
Posts: 82
Thanks: 2
Thanked 453 Times in 60 Posts
Country: Country Flag
Default THE LATEST OSCAM-EMU FOR VARIOUS PLATFORMS (Current Version: r11391 - EMU-Patch r417-754)

NEW:
EMU r417-754
- Powervu fix


- Enhanced BISS system
- Add Powevu hash mode 3 support
- Updates for PowerVu Crypto-System
- Add Tandberg ECM/EMM checksum validation
- Improved PowerVu hash mode 0 handling




Special features:
==========


Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disabled-/Enabled-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - OSCamLogo with OSCamLabel (WebIf --> config --> webif --> OSCam Label)
(Example: set it to Box-Name ...)


Write channelcache and emmcache/emmstat:
Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/Dvbapi
- "Write emmcache/emmstat to file" in Config/Logging
Default for both: disabled

All three files are written to config-dir
If "emmlogdir" is defined, oscam.emmcache and oscam.emmstat are written to this defined dir.


Provider-Picons on Status-Page:
Important: For this feature you must activate the parameters "Poll (initial refresh)" and "Http show Picons".
Also you must copy a picon (named IC_provider.tpl) to template-dir (parameter "Http tpl") or picons-dir (if defined - parameter "Path for picons")


User specific loadbalancer parameters:

User force always reopen:
Webif -> Config -> Loadbalancer -> User force always reopen
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user = 0 or 1


Only if count reached lb_min_ecmcount:
Webif -> Config -> Loadbalancer -> only if count reached lb_min_ecmcount
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user_lb_min = 0 or 1


General date format: dd.mm.yyyy


Support tongfang version 3 NTIC2


Support ORF ICE Card with Caid 0650
(complete Austria-SAT with "Irdeto"-Mode)


WebIf - Special WebIf-Design included



Tandberg config:
===========

Keys in SoftCam.Key:

T <entitlement> 01 <key>

for example (entitlement = 1234):
T 00001234 01 1122334455667788

leading zeros maybe be skipped. same key as above:
T 1234 01 1122334455667788

AU keys:
for old key set:
T <key index (hex)> MK <key>

64 keys are needed:

T 40 MK 1122334455667788
T 41 MK 1122334455667788
...
T 7F MK 1122334455667788

for new key set:
T <key index (hex)> MK01 <key>

64 keys are needed:

T 40 MK01 1122334455667788
T 41 MK01 1122334455667788
...
T 7F MK01 1122334455667788



Oscam Complete - Minimal:
==================


- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)

Now with GBox !!!
With Coolstream and Coolstream HD2


Additional for "solo4k", "arm_v7", "raspb_armv7", "arm_v8", "arm_dream", "arm_dream", "mipsel", "mipsoe20", "openpli40", "openwrt1209aa", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60", "fritz74xxOS62" and "fritz74xxOS65" a binary with "libusb".
Additional for "arm_v7" and "raspb_armv7" a binary with "pcsc".
Additional for "arm_v7", "arm", "raspb_armv7", "raspb_hard", "raspb_soft", "syn-atom", "openwrt24", "openwrt26", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "raspb_hard", "raspb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "solo4k", "fritz71xx", "mipsoe20" and "openpli40" a binary with "libusb static".
Additional for "arm_v8" a binary with "dvbapi" and "libusb".
Additional for "raspb_armv7" a binary with "dvbapi", "libusb" and "pcsc".



Explanation of sub-directories:
===================


Part1:
build_dir_arm_cortex_a9 = Cortex A9 CPU (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (WNR3500L)
build_dir_fonera = Fonera Router
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)

Part2:
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/820/7020HD/7025(+)/7080/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_openpli40 = OpenPLI 4.0 All Mipsel (OE 2.2 and higher, Black Hole 3.0 and higher)
build_dir_powerpc = DMM 600/7000/7020si (PPC Tuxbox)
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini

Part3:
build_dir_arm_v7 = ARM v7 DS114/DS115j/DS213j/DS214 and many more
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_marv_7823 = Synology Marvell Armada XP MV7823x
build_dir_mca = Matrix Cam Air
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)

Part4:
build_dir_cool1 = Coolstream
build_dir_cool2 = Coolstream HD2

build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_fritz74xxOS65 = Fritzbox 74XX OS6.5
build_dir_sheevaplug = Sheevaplug

Part5:
build_dir_raspb_armv7 = Raspberry Pi 2, Banana Pi M2
build_dir_raspb_hard = Raspberry Pi HardFPU
build_dir_raspb_soft = Raspberry Pi SoftFPU
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_solo4k = Vu+ Solo 4k, WeTekPlay
build_dir_syn_atom = Synology with Atom CPU
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)

Part6:
build_dir_arm_v8 = ARM v8 OrdoidC2 (aarch64 LibreELEC)
build_dir_arm_dream = ARM Dreambox (DMM 900UHD, Mutant HD51/AX HD51)
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)



Special Design:
===========

1) Unpack zip-file and copy the single files from the directory to the oscam-template-directory on the Box/Server
2) Use CTRL-F5 to refresh oscam-webif-tab
Reply With Quote
The Following 15 Users Say Thank You to hapeba For This Useful Post:
atlas35 (04-11-2017), BadBoyXxX (20-11-2017), caruga (18-12-2017), catalin_radio (10-11-2017), dahaka (05-11-2017), dankargo (04-11-2017), endebar (04-11-2017), femi (16-11-2017), harshy (12-11-2017), jdavid22 (25-11-2017), nasre (24-11-2017), rmiino (12-12-2017), simon019 (04-11-2017), Sparks02 (19-12-2017), vogelman (05-11-2017)
  #78  
Old 24-12-2017, 18:32  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
hapeba hapeba is offline
Senior Member
 
Join Date: Aug 2013
Posts: 82
Thanks: 2
Thanked 453 Times in 60 Posts
Country: Country Flag
Default THE LATEST OSCAM-EMU FOR VARIOUS PLATFORMS (Current Version: r11397 - EMU-Patch r432-764)

NEW:
OSCam Version r11397


EMU r432-764
- Add PowerVu hash mode 4
- BISS enhancements part 3
- Drecrypt updates and fixes
- Enhanced BISS system
- Add Powevu hash mode 3 support
- Updates for PowerVu Crypto-System
- Add Tandberg ECM/EMM checksum validation
- Improved PowerVu hash mode 0 handling




Special features:
==========


Pid-File control : without start-parameter "-B" and with "pidfile=[blank]" in oscam.conf --> no Pid-File

WebIf - Readers-/Users-Menu --> Disabled-/Enabled-Symbol changed

WebIf - Status-Menu --> Skript-/Shutdown-Button "properties" individually programmable via CSS-File
(LI.menu_script ... and/or LI.menu_shutdown ...)

WebIf - OSCamLogo with OSCamLabel (WebIf --> config --> webif --> OSCam Label)
(Example: set it to Box-Name ...)


Write channelcache and emmcache/emmstat:
Enable/disable parameter over webif (not with usecache from parameter emmcache)
- "Save channelcache" in Config/Dvbapi
- "Write emmcache/emmstat to file" in Config/Logging
Default for both: disabled

All three files are written to config-dir
If "emmlogdir" is defined, oscam.emmcache and oscam.emmstat are written to this defined dir.


Provider-Picons on Status-Page:
Important: For this feature you must activate the parameters "Poll (initial refresh)" and "Http show Picons".
Also you must copy a picon (named IC_provider.tpl) to template-dir (parameter "Http tpl") or picons-dir (if defined - parameter "Path for picons")


User specific loadbalancer parameters:

User force always reopen:
Webif -> Config -> Loadbalancer -> User force always reopen
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user = 0 or 1


Only if count reached lb_min_ecmcount:
Webif -> Config -> Loadbalancer -> only if count reached lb_min_ecmcount
0 - disabled (default)
1 - enabled

or in oscam.user:

[account]
lb_force_reopen_user_lb_min = 0 or 1


General date format: dd.mm.yyyy


Support tongfang version 3 NTIC2


Support ORF ICE Card with Caid 0650
(complete Austria-SAT with "Irdeto"-Mode)


WebIf - Special WebIf-Design included



Tandberg config:
===========

Keys in SoftCam.Key:

T <entitlement> 01 <key>

for example (entitlement = 1234):
T 00001234 01 1122334455667788

leading zeros maybe be skipped. same key as above:
T 1234 01 1122334455667788

AU keys:
for old key set:
T <key index (hex)> MK <key>

64 keys are needed:

T 40 MK 1122334455667788
T 41 MK 1122334455667788
...
T 7F MK 1122334455667788

for new key set:
T <key index (hex)> MK01 <key>

64 keys are needed:

T 40 MK01 1122334455667788
T 41 MK01 1122334455667788
...
T 7F MK01 1122334455667788



Oscam Complete - Minimal:
==================


- "with all" but without ...
- Touch
- OpenSSL
- IPV6
- PCSC
- Smartreader-Support (LibUSB)



Additional for "solo4k", "arm_v7", "raspb_armv7", "arm_v8", "arm_dream", "arm_dream", "mipsel", "mipsoe20", "openpli40", "openwrt1209aa", "fritz71xx", "fritz72xx", "fritz73xx", "fritz74xx", "fritz73xxOS60", "fritz73xxOS62", "fritz74xxOS60", "fritz74xxOS62" and "fritz74xxOS65" a binary with "libusb".
Additional for "arm_v7" and "raspb_armv7" a binary with "pcsc".
Additional for "arm_v7", "arm", "raspb_armv7", "raspb_hard", "raspb_soft", "syn-atom", "openwrt24", "openwrt26", "x86_32" and "x86_64" a binary with "libusb" and "pcsc".
Additional for "syn-atom", "raspb_hard", "raspb_soft", "mca", "mipsel" and "mipsoe20" a binary with "libcrypto static".
Additional for "solo4k", "fritz71xx", "mipsoe20" and "openpli40" a binary with "libusb static".
Additional for "arm_v8" a binary with "dvbapi" and "libusb".
Additional for "raspb_armv7" a binary with "dvbapi", "libusb" and "pcsc".



Explanation of sub-directories:
===================


Part1:
build_dir_arm_cortex_a9 = Cortex A9 CPU (SU980)
build_dir_azbox = Azbox HD Premium/-Plus/Elite
build_dir_brcm63xx = Brcm63xx OpenWRT
build_dir_brcm63xx_other = Brcm63xx OTHER
build_dir_ddwrt346 = DDWRT gcc 3.4.6
build_dir_ddwrt410 = DDWRT gcc 4.1.0 (WNR3500L)
build_dir_fonera = Fonera Router
build_dir_nslu2open = ARM NSLU2 OpenWRT
build_dir_openwrt26 = OpenWRT 2.6
build_dir_openwrt24 = OpenWRT 2.4 (Fritz 32XX,71XX,72XX)
build_dir_openwrt1209aa = OpenWRT 12.09 Attitude Adjustment (ulibc)

Part2:
build_dir_dreambox_fpu = DMM 500HD/800SE/7020HD/8000/VU+ (OE 2.0 FPU)
build_dir_mipsel = DMM 500HD/800(SE)/7020HD/7025(+)/8000/VU+ (OE 1.6)
build_dir_mipsoe20 = DMM 500HD/800(SE)/820/7020HD/7025(+)/7080/8000/VU+ (OE 2.0)
build_dir_mipswdtv = Mipsel Tuxbox WDTV
build_dir_openpli40 = OpenPLI 4.0 All Mipsel (OE 2.2 and higher, Black Hole 3.0 and higher)
build_dir_powerpc = DMM 600/7000/7020si (PPC Tuxbox)
build_dir_ppcold = DBox2/DMM 500/56x0
build_dir_ppc_dream_old = Older Dreams with Gemini

Part3:
build_dir_arm_v7 = ARM v7 DS114/DS115j/DS213j/DS214 and many more
build_dir_dockstar = DOCKSTAR (arm)
build_dir_fritz33xx = Fritzbox 33XX
build_dir_fritz71xx = Fritzbox 71XX
build_dir_fritz72xx = Fritzbox 72XX
build_dir_marv_6281 = Synology Marvell 88F628x
build_dir_marv_7823 = Synology Marvell Armada XP MV7823x
build_dir_mca = Matrix Cam Air
build_dir_ppc_eglibc = PowerPC Q or IQ (Synology NAS DS213+/DS413)

Part4:
build_dir_cool1 = Coolstream
build_dir_cool2 = Coolstream HD2
build_dir_fritz73xx = Fritzbox 73XX
build_dir_fritz74xx = Fritzbox 74XX
build_dir_fritz73xxOS60 = Fritzbox 73XX OS6.0
build_dir_fritz74xxOS60 = Fritzbox 74XX OS6.0
build_dir_fritz73xxOS62 = Fritzbox 73XX OS6.2
build_dir_fritz74xxOS62 = Fritzbox 74XX OS6.2
build_dir_fritz74xxOS65 = Fritzbox 74XX OS6.5
build_dir_sheevaplug = Sheevaplug

Part5:
build_dir_raspb_armv7 = Raspberry Pi 2, Banana Pi M2
build_dir_raspb_hard = Raspberry Pi HardFPU
build_dir_raspb_soft = Raspberry Pi SoftFPU
build_dir_samsungtv = SamsungTV Serie E/F (ES7xxx/8xxx)
build_dir_solo4k = Vu+ Solo 4k, WeTekPlay
build_dir_syn_atom = Synology with Atom CPU
build_dir_tplink = TP-Link 1043ND
build_dir_tplink_backfire = TP-Link Backfire (openwrt/ar71xx)

Part6:
build_dir_arm_v8 = ARM v8 OrdoidC2 (aarch64 LibreELEC), Raspberry Pi 3
build_dir_arm_dream = ARM Dreambox (DMM 900UHD, Mutant HD51/AX HD51)
build_dir_sh_4 = Octagon, Ipbox, Kathrein, Fortis, Spark-Box (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_sh4 = UFS-9XX, Kathrein & Octagon (segfaults on some systems) (additional with stapi, stapi5_UFS916_0.03, stapi5_UFS916_0.05 and stapi5_OPENBOX_0.05)
build_dir_x86_32 = Linux PC's 32 Bit, Igel
build_dir_x86_32_static = Linux PC's 32 Bit, Igel (static versions - libcrypto, libusb and pcsc static)
build_dir_x86_64 = Linux PC's 64 Bit (additional with dvbapi and libcrypto static for ZOTAC ZBOX ID91 OpenELEC)



Special Design:
===========

1) Unpack zip-file and copy the single files from the directory to the oscam-template-directory on the Box/Server
2) Use CTRL-F5 to refresh oscam-webif-tab
Reply With Quote
The Following 14 Users Say Thank You to hapeba For This Useful Post:
caruga (02-01-2018), cloud.71 (02-03-2018), dahaka (24-12-2017), dejvi2015 (28-01-2018), femi (11-01-2018), gopinatharcot (23-01-2018), jdavid22 (28-12-2017), kikkadipara (10-09-2018), matt33 (24-12-2017), ooOO_SORGOS_OOoo (24-12-2017), petrus73 (17-05-2018), Puppesan (30-12-2017), Rickk (24-12-2017), vanzettoalb (14-03-2018)
  #79  
Old 24-03-2018, 17:53  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
Gianni8127's Avatar
Gianni8127 Gianni8127 is offline
Senior Member
 
Join Date: Mar 2010
Location: S.M.Leuca
Posts: 178
Thanks: 576
Thanked 816 Times in 138 Posts
Country: Country Flag
Default NEW oscam-1.20_svn-r11424-emu Gianni8127

New Oscam oscam-1.20-svn11401-emu


arm enigma2 4K
mips enigma2 OE.2
sh4 qboxhd
__________________
DM8000 HD PVR DVD
VU+ DUO 2 dvbs2 + dvbs2 + turbo vu+
VU+ ZERO ( very fast )
VU+ SOLO 4K (of passage)
VU+ UNO 4K (arriving)
HTC ONE M10 32Gb
PS4
Xbox One
Reply With Quote
The Following 9 Users Say Thank You to Gianni8127 For This Useful Post:
assa (25-03-2018), catalin_radio (24-03-2018), femi (31-03-2018), kaka9 (24-03-2018), Neofita sat (14-04-2018), pio777 (25-03-2018), reza_ (28-05-2018), rqaoud (25-03-2018), TurboPirate (09-05-2018)
  #80  
Old 15-04-2018, 17:55  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
Gianni8127's Avatar
Gianni8127 Gianni8127 is offline
Senior Member
 
Join Date: Mar 2010
Location: S.M.Leuca
Posts: 178
Thanks: 576
Thanked 816 Times in 138 Posts
Country: Country Flag
Default NEW oscam-1.20_svn-r11424-emu Gianni8127

oscam-1.20-emu_svn11420
PC PC_LIBUSB-PC_PCSC x86
MIPS ENIGMA2 OE2.0
SH4 QBOXHD
ARM ENIGMA2 4K
oscam-config-FULL
Attached Files
File Type: rar oscam-1.20-unstable_svn11420.rar (4.92 MB, 626 views)
__________________
DM8000 HD PVR DVD
VU+ DUO 2 dvbs2 + dvbs2 + turbo vu+
VU+ ZERO ( very fast )
VU+ SOLO 4K (of passage)
VU+ UNO 4K (arriving)
HTC ONE M10 32Gb
PS4
Xbox One

Last edited by Gianni8127; 15-04-2018 at 18:09..
Reply With Quote
The Following 20 Users Say Thank You to Gianni8127 For This Useful Post:
assa (17-04-2018), atef 0 (28-04-2018), balkanac (26-04-2018), CapVi (22-05-2018), caruga (20-04-2018), cocadaboa (15-04-2018), flatdish2 (28-05-2018), freon (15-04-2018), hasanurmia (17-08-2018), kaka9 (16-04-2018), kimchi (28-04-2018), leso60 (16-04-2018), mako74 (15-04-2018), nikyp (28-04-2018), pilisu (11-05-2018), rqaoud (15-04-2018), simazambrosso (15-04-2018), tent (28-04-2018), TurboPirate (03-05-2018), vanzettoalb (15-04-2018)
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 12:32.


Powered by vBulletin
Copyright ©2006-2019 - Sat Universe