Hi, guys!
No offence to the authors of various "how to's" I found on the subject but I find them wanting in several areas: details are not covered without the usual, geekish, unnecessary jargon, frequently some steps are missing and so on...
So, I will post some decent efforts and then ask questions...
My Q: can we have only Scam as a
-card reader [CCcam and not NewcamD protocol] and
-CS server, then
-client to its own and external [CCcam and NewcamD readers, as well as
-Emulator, i.e. can it also work with [esp. BISS] keys, please?
My Q seems logical, especially if you see this "intro":
Here is some help as to which file goes where in various images:
No offence to the authors of various "how to's" I found on the subject but I find them wanting in several areas: details are not covered without the usual, geekish, unnecessary jargon, frequently some steps are missing and so on...
So, I will post some decent efforts and then ask questions...
Notice that most write only about home network sharing.... hehe...Scam 3.57 tutorial home network
Scam 3.57 tutorial home network
I don't use scam but because of too many requests i made tests to study.
Remember that in 3.57 che config files are changed so you have to follow these simply rules:
1) BE SURE TO HAVE SCAM 3.57 VERSION IN ALL YOUR NETWORK
2) BE SURE TO HAVE THE CONFIG FILE IN THE RIGHT POSITION:
--- ENIGMA1 = /var/scam/config
--- ENIGMA2 = /etc/scam/config
We will make this config:
Server1: CCcam ip 198.168.0.2 port: 12000
Server: Scam server with local cards and Cccam share: ip 192.168.0.8 port: 4321
Client: Scam client ip: 192.168.0.10 port: 4321
Warning: With this config Scam Server will receive from CCcam server but will pass to Scam Client - only local cards (as for example ndz and tivusat)
1) First of all install in all your dreambox the socketmmi plugin
2) Config CCcam server to share with Scam server: add to CCcam server this line:
F: scamserver scampass 3 1 0 { 0:0:3 }
3) Config Scam Server:
### scam host
/net/ecm_server/homeserver/port=4321
/net/ecm_server/homeserver/user/client1/pass=test
### cccam share (3.52)
/net/cccam/home/user=scamserver
/net/cccam/home/pass=scampass
/net/cccam/home/host=198.168.0.2
/net/cccam/home/serv=12000
4) Config Scam Client:
### scam client
/net/ecm_client/homeserver/host=192.168.0.8
/net/ecm_client/homeserver/port=4321
/net/ecm_client/homeserver/user/client1/pass=test
Thats all. You have only to substitute the correct ip address and ports in this config to have a working scam 3.57 net.
You can check it in the plugin socketmmi: Menu->setup->softcam->Nerwork.
Here are the shots of Scam server and client working with 3.57 version:
thanks to Sloggo
My Q: can we have only Scam as a
-card reader [CCcam and not NewcamD protocol] and
-CS server, then
-client to its own and external [CCcam and NewcamD readers, as well as
-Emulator, i.e. can it also work with [esp. BISS] keys, please?
My Q seems logical, especially if you see this "intro":
Of course, path to various files depends on an image, which have different structures but...Scam connect with CCcam
Scam CCcam connect with Today I have a new scam successfully connected with CCcam.
CCcam which was the server and the client Scam. The switching times are excellent and even HD runs. which should include the user with a D02 card delight.
Here is the config under the usr / scam is learn.
### scam host
#/net/ecm_server/foobar/port=4321
#/net/ecm_server/foobar/pass=passwort
### scam client
#/net/ecm_client/foobar/host=192.168.0.xxx
#/net/ecm_client/foobar/port=4321
#/net/ecm_client/foobar/pass=passwort
### newcamd connect
#/net/newcamd/foo/host=192.168.0.xxx
#/net/newcamd/foo/port=1234
#/net/newcamd/foo/user=username
#/net/newcamd/foo/pass=password
#/net/newcamd/foo/k€y=1234567890123456789012345678
### s-e-r-i-a-l port smartcard readers (3.51a)
# device node
#/sc/zerial/<name>/device=<string>
#<>e.g.: /dev/ttyUSB0
# type
#/sc/zerial/<name>/type=<string****<><><><>[default: phoenix]
#<>valid types: mastercrd2, phoenix, smartreader+
# clock frequency in Hz
#/sc/zerial/<name>/fs=<num><><><><><>[default: 3571200]
# example
#/sc/zerial/usb0/device=/dev/ttyUSB0
#/sc/zerial/usb0/type=smartreader+
### cccam share (3.52)
/net/cccam/home/user=user
/net/cccam/home/pass=pass
/net/cccam/home/host=ServerIP oder Dyndns
/net/cccam/home/serv=12000
In the CCcam.cfg be a simple F Line to be created.
Example: F: user pass 1 0 0
Interesting would be even if the scam could serve as a server.
# # # Scam host
# / net / ecm_server / foobar / port = 4321
# / net / ecm_server / foobar / pass = password
Unfortunately this, the user entry to the scam as a server to test.
A connection from scam to scam, however, is not a problem. If the settings selfexplaining
Here is some help as to which file goes where in various images:
So, anyone knowledgeable/experienced?!?mehr muss ja eigentlich nicht in die config dateien rein bei den einzelnen Boxen.
/var/tuxbox/config/emulist.xml
/var/scam/cw_servers
/var/uninstall/emu_scam.xml
/var/uninstall/emu_scam/emulist.xml
/var/bin/scam
/var/keys/SoftCam.Key
/var/keys/AutoRoll.Key
/var/keys/Autoupdate.Key
/var/keys/seca2
apart from emu_scam.xml because it wasn't in the zip.
then I understood I nedded to edit emulist.xml,which I did and it ended up looking like this:
<?xml version="1.0" encoding="iso-8859-1" ?>
<emulist>
<emu text="Common Interface" name="CI" helptext="" emuadvanced="ci" help="" />
<emu text="Newcamd v.5.13" name="NEWCAMD" helptext="newcamd" emuadvanced="newcamd" help="/var/doc/newcamd/readme.txt" />
<emu text="Radegast v.3 beta10" name="RADEGAST" helptext="radegast" emuadvanced="rdgd" help="/var/doc/radegast/readme.txt" />
<emu text="Camd 3.651" name="CAMD3" helptext="camd3" emuadvanced="camd3" help="/var/doc/camd3/readme.txt" /> <emu text="scam" name="scam" helptext="scam" emuadvanced="scam" help="/var/doc/camd3/readme.txt" />
</emulist>
the esuly is I can see now "scum" in the softcam menu,but when I pick it it does't start working...
What should I do?
Surely I must add some lines somewhere...
Maybe a different approach?-editing the SF image?
Last edited: