how to fix error on the screen

plovdiv

Registered
Messages
73
hi,
i ve got db800hd-pvr it shows message error on the db screen. i tried to fixed no ca found it fixes but when i start to flashes it gives me the following message
error
and
no ca found. even after succesfuly fixing no ca found.
any help please.
thank you.
 

irish

Registered
Messages
1
I am in the same boat, after trying to flash via the web interface I am still getting the error message. About to chuck it in the too hard basket :)
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,481
1--- Connect USB cable to service slot on DM800SE/DM500HD and USB slot on Pc. Windows will then install the driver

You will notice, windows created a virtual Com Port connection to be be used ( in this case Com Port 4)


2 --- Switch Receiver off and connect Network cable Receiver and Router

3 --- Then Start SunRay- FlashUp, Tick Use Network, Fill the relevant boxes with local pc IP and Romote ip of your choose and click Connect.

Program will ask for you to Switch on the receiver.

4 -- It will then go into HTTP mode

5 -- At this stage, you open your browser and insert the romote IP shown on the 800LCD

Page will open as per bellow and then you chose the option Update Firmware.

6 --- Click Browse and navigate to your image

7 --- Chose the image and click Open

8 --- Now click Flash button

9 --- Image will start to

10 --- When it finishes you can click the back button of your browser so we can then send in the bl82 do not reboot

11 Browse and select the SSL82 for your DM800SE Clone

12 --- Once again Click Flash


13 -- After finishing click Reboot. In Most case you will need to do so manually



Box will then reboot and come back to life with image we chose to load. Then you can load your Patched image of your coice as box is functional again
 

toysoft

Member
Messages
1,828
"error" Message means your sim is corrupted, and should be replaced by a new sim,

TS
 
Top