Flashing Your VU+ Duo2 With A USB Stick

Status
Not open for further replies.

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,480
Flashing Your VU+ Duo2 With A USB Stick


Easiest method is by USB make sure its formatted to fat32.

1. Download the USB version of any image.

2. Unrar and send the vuplus folder to your USB stick.

3. Turn off the power at the back of the VU+ you'll find the switch near the power cable. Insert your USB stick in the front USB port.

4. Turn back on the power.

5. At the prompt press the power button.

On the front display you'll see reading USB device, this takes a while then you'll see erasing then programming.

It will then tell you to remove USB and reboot. Reboot with the power switch at the back.

Ferret
 
Status
Not open for further replies.
Top