RGB Output Through the Scart

HDMI and Component video outputs work very well.

RGB, YUV and Composite outputs through the scart are selectable from the AV menu. But scart, whichever you change as RGB or YUV from the menu, gives only composite video output on SD-PAL resolution. There are no YUV and RGB outputs from the scart.

I did not tested the seperate S-video and yellow jack Composite outputs. I am in doubt they are also not enabled.

Do you think this problem will be solved in future firmware releases?

I tested the seperate S-video and yellow jack Composite outputs. They are enabled. They are working on SD-PAL resolution well. Also upper video scart give only composite video on SD-PAL, do not enabled to give RGB and YUV.

I also tested the VCR SCART output,

VCR SCART output ,the upper one on the back ot the box, gives only CVBS ( composite) on SD-PAL and SD-NTSC.
On AV Settings it is seen as RGB but it is really CVBS.