Oscam can not read card ATR 00 00

Z

Zyberdude

Registered
Messages
2
I have not had a problem with oscam before, but now I don't know what's going on. My live log says:

(reader) lower_card [internal] card detected
(reader) lower_card [internal] ATR: 00 00
(reader) lower_card [internal] ERROR: Could not read reader->convention
(reader) lower_card [internal] Error activating card.
(reader) lower_card [internal] ATR: 00 00
(reader) lower_card [internal] ERROR: Could not read reader->convention
(reader) lower_card [internal] Error activating card.
(reader) lower_card [internal] ATR: 00 00
(reader) lower_card [internal] ERROR: Could not read reader->convention
(reader) lower_card [internal] Error activating card.
(reader) lower_card [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
(reader) lower_card [internal] card initializing error
(main) init for all local cards done

Is the Vu zero box smartcard reader faulty? I have tried several cards with the same errors.
 
K

katiec33

Registered
Messages
10
make sure ya configs right, if using usb readers telnet/ssh into box and type lsusb and see the address matches your reader settings. For the in built reader chip might of gone there for get a usb smartcard reader.
 
P

Postmann

Registered
Messages
7
I have the same issue. A smartcard USB-Reader is sometimes plugged with the box and sometimes unplugged.

With isusb in telnet I get Bus numbers. But where do I check the links in oscam?
 
You must log in or register to reply here.
Top