TNT Sat - Oscam + CCCam

bigapple · Jul 24, 2018

is this correct?

[reader]
label = tntsat5
enable = 1
protocol = mouse
detect = cd
device = /dev/ttyUSB0
caid = 0500
mhz = 357
cardmhz = 357
group = 3
disablecrccws = 1
boxkey = 014D902F
deskey = 22D60F37567BAB12F505D8C8C71A22E3
aeskeys = 0500@030B00:439726EBB6A939A456C05FF6AA606C43,F1DCB15A3DE3FA1D7E2998DA7DD4898A,48C19B86A4E2EB7288DFDCE7C2BB7577,0,0,0,0,0,0,0,0,0,9A3EAB0203EBFFCA85B4F18280749F56,2504B382B16D8C6758DB960E311E9351,349883E54D58336DCA750A878ACC5CD5,4A26AD251795A58A11BBC07B53C44348,2844258792F6D9529A328B3E8CD2FD0E,F62C3BE300E98BBB378DFA38BB6EEEF1,0,0,6B1B024D36F60974973CB81FA5E8F01C,127003F8E95100367A556121C779FB6E,9D73BE61D6498E2F20E157E1C6416A23,1DE5B042AD670BB16A3A76BDAD2F7AC0,6747F2E500CF123428337591435C6585
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
emmcache = 0,1,1,2
lb_weight = 300

mark21 · Sep 20, 2018

This is my config.
Untill 5 days it's working in slot1, internal.

Now only 2 channels are working, Cherie 25 and RMC Decouverte.

Can anyone confirm ?

I have also this message:
(aes) AES Decrypt key 25 not found for 0500@030B00 (aka V 030B00 E19 ...)
2018/09/20 23:39:03 6AEDEAC3 c (ecm) (0500&030B00/1319//245A/168): not found (1 ms) by TNTSat - France 2 HD

label = TNTSat
description = TNTSat
protocol = smargo
device = /dev/ttyUSB2
pincode = 0000
services = tnt
lb_whitelist_services = tnt
fallback = 1
caid = 0500
boxkey = 014D902F
deskey = 22D60F37567BAB12F505D8C8C71A22E3
detect = cd
mhz = 534
cardmhz = 2700
ident = 0500:030B00
aeskeys = 0500@030B00:439726EBB6A939A456C05FF6AA606C43,F1DCB15A3DE3FA1D7E2998DA7DD4898A,48C19B86A4E2EB7288DFDCE7C2BB7577,0,0,0,0,0,0,0,0,0,9A3EAB0203EBFFCA85B4F18280749F56,2504B382B16D8C6758DB960E311E9351,349883E54D58336DCA750A878ACC5CD5,4A26AD251795A58A11BBC07B53C44348,2844258792F6D9529A328B3E8CD2FD0E,F62C3BE300E98BBB378DFA38BB6EEEF1,0,0,6B1B024D36F60974973CB81FA5E8F01C,127003F8E95100367A556121C779FB6E,9D73BE61D6498E2F20E157E1C6416A23,1DE5B042AD670BB16A3A76BDAD2F7AC0
group = 1
emmcache = 1,3,2,0
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
dropbadcws = 1
disablecrccws = 1
audisabled = 1

femi · Sep 21, 2018

Do you have 1319 in your services?
You should remove spaces in yor aes-key, but I think your aes-key is incomplete or any part is wrong.

I can not confirm, because my card is a v6.

percivjr · Sep 21, 2018

Works for me:

Code:

[reader]
label                         = tntsat
description                   = bottom
protocol                      = internal
device                        = /dev/sci1
disablecrccws_only_for        = 0500:030B00
caid                          = 0500
boxkey                        = 014D902F
deskey                        = 22D60F37567BAB12F505D8C8C71A22E3
ecmwhitelist                  = 0500@030B00:E0,E4,EC,F4,148,14E,15C,166,168,1C4
detect                        = cd
mhz                           = 450
cardmhz                       = 2700
ident                         = 0500:030B00
aeskeys                       = 0500@030B00:439726EBB6A939A456C05FF6AA606C43,F1DCB15A3DE3FA1D7E2998DA7DD4898A,48C19B86A4E2EB7288DFDCE7C2BB7577,0,0,0,0,0,0,0,0,0,9A3EAB0203EBFFCA85B4F18280749F56,2504B382B16D8C6758DB960E311E9351,349883E54D58336DCA750A878ACC5CD5,4A26AD251795A58A11BBC07B53C44348,2844258792F6D9529A328B3E8CD2FD0E,F62C3BE300E98BBB378DFA38BB6EEEF1,0,0,6B1B024D36F60974973CB81FA5E8F01C,127003F8E95100367A556121C779FB6E,9D73BE61D6498E2F20E157E1C6416A23,1DE5B042AD670BB16A3A76BDAD2F7AC0,6747F2E500CF123428337591435C6585,5DB5806B8EE14C2B512DB6FB7C5167C1
group                         = 1
audisabled                    = 1

mark21 · Sep 22, 2018

Now working, thank you.

2460 new sid for TF1 HD.

If other channels changed SID please post.

tolive · Sep 28, 2018

hi
black screen for 2 days, aes changement :
AES Decrypt key 26 not found for 0500@030B00 (aka V 030B00 E1A ...)

regards

Levis 618 · Sep 28, 2018

Hi,

new AES-Key needed.
Here it is:

aeskeys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

regards

mark21 · Oct 5, 2018

not working anymore..

percivjr · Oct 5, 2018

mark21 said:
not working anymore..

Seems to be OK for me.

Which channel?

Post Oscam log?

saintbri · Oct 5, 2018

TNTSat-oscam

sadly not working here either maybe new AES keys needed

mark21 · Oct 6, 2018

percivjr said:
Seems to be OK for me.

Which channel?

Post Oscam log?

it working, my mistake, usb0 changed to usb1 in my reader settings.

dmaimone · Oct 6, 2018

Hi, this is my config:
box mutant51 with openatv 6.2,
oscam-1.20-unstable_svn-r11392,
card tnt V6,
oscam.server:

Code:

[reader]
label                         = tntsat
protocol                      = internal
device                        = /dev/sci0
caid                          = 0500
boxkey                        = 014D902F
deskey                        = 799EE94FE7BC221186CED2B06C8390B6
detect                        = cd
ident                         = 0500:FF400,030B00
aeskeys                       = 0500@030B00:439726EBB6A939A456C05FF6AA606C43,F1D
CB15A3DE3FA1D7E2998DA7DD4898A,48C19B86A4E2EB7288DFDCE7C2BB7577,0,0,0,0,0,0,0,0,
0,9A3EAB0203EBFFCA85B4F18280749F56,2504B382B16D8C6758DB960E311E9351,349883E54D58
336DCA750A878ACC5CD5,4A26AD251795A58A11BBC07B53C44348,2844258792F6D9529A328B3E8C
D2FD0E,F62C3BE300E98BBB378DFA38BB6EEEF1,0,0,6B1B024D36F60974973CB81FA5E8F01C,127
003F8E95100367A556121C779FB6E,9D73BE61D6498E2F20E157E1C6416A23,1DE5B042AD670BB16
A3A76BDAD2F7AC0,6747F2E500CF123428337591435C6585,5DB5806B8EE14C2B512DB6FB7C5167C
1,E4C24415A9234EDCC8082F84854242AE
group                         = 1
lb_weight                     = 1000
disablecrccws                 = 1
audisabled                    = 1

and this is the log

Code:

2018/10/06 12:57:51 00000000 s     (main) System name    = Linux
2018/10/06 12:57:51 00000000 s     (main) Host name      = mutant51
2018/10/06 12:57:51 00000000 s     (main) Release        = 4.10.12
2018/10/06 12:57:51 00000000 s     (main) Version        = #1 SMP Mon Sep 3 05:18:55 CEST 2018
2018/10/06 12:57:51 00000000 s     (main) Machine        = armv7l
2018/10/06 12:57:51 00000000 s     (main) Stb model      = hd51
2018/10/06 12:57:51 00000000 s     (main) Stb boxtype    = hd51
2018/10/06 12:57:51 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1162
2018/10/06 12:57:51 00000000 s      (aes) 16 AES key(s) added on reader tntsat for 0500@030b00
2018/10/06 12:57:51 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2018/10/06 12:57:51 00000000 s     (main) signal handling initialized
2018/10/06 12:57:51 00000000 s   (config) 1 provid's loaded
2018/10/06 12:57:51 00000000 s   (config) 1 service-id's loaded in 0 ms
2018/10/06 12:57:51 00000000 s   (reader) tntsat [internal] creating thread for device /dev/sci0
2018/10/06 12:57:51 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2018/10/06 12:57:51 00000000 s     (main) waiting for local card init
2018/10/06 12:57:51 0BBB2118 r   (reader) tntsat [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2018/10/06 12:57:51 0BBB2118 r   (reader) tntsat [internal] Reader sci internal, detected box type: hd51
2018/10/06 12:57:51 0BBB2118 r   (reader) tntsat [internal] card detected
2018/10/06 12:57:51 29C91454 h    (webif) webif: decompressed 177621 bytes back into 437480 bytes
2018/10/06 12:57:51 29C91454 h    (webif) HTTP Server running. ip=0.0.0.0 port=83
2018/10/06 12:57:51 0BBB2118 r   (reader) tntsat [internal] ATR: 3F 77 18 00 00 D3 8A 42 01 64 90 00 
2018/10/06 12:57:54 0BBB2118 r   (reader) tntsat [internal] Buffers readed  0 bytes total time_us 3062880
2018/10/06 12:57:54 0BBB2118 r   (reader) tntsat [internal] Init card protocol T0, FI=1, F=372, D=12, N=0
2018/10/06 12:57:54 0BBB2118 r   (reader) tntsat [internal] Calculated work ETU is 6.20 us reader mhz = 500
2018/10/06 12:57:54 0BBB2118 r   (reader) tntsat [internal] Buffers readed  0 bytes total time_us 75096
2018/10/06 12:57:55 0BBB2118 r   (reader) tntsat [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2018/10/06 12:57:56 0BBB2118 r   (reader) tntsat [internal] using ecm #805 for long viaccess ecm
2018/10/06 12:57:56 0BBB2118 r   (reader) tntsat [internal] type: Viaccess (non-standard atr), caid: 0500, serial: #########
2018/10/06 12:57:56 0BBB2118 r   (reader) tntsat [internal] providers: 2 (FFF400,030B00)
2018/10/06 12:57:57 0BBB2118 r   (reader) tntsat [internal] Maturity level [F]=no age limit
2018/10/06 12:57:57 0BBB2118 r   (reader) tntsat [internal] ready for requests
2018/10/06 12:57:57 0BBB2118 r   (reader) tntsat [internal] found card system viaccess
2018/10/06 12:57:57 0BBB2118 r   (reader) tntsat [viaccess] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2018/10/06 12:57:57 0BBB2118 r   (reader) tntsat [viaccess] card detected
2018/10/06 12:57:57 0BBB2118 r   (reader) tntsat [viaccess] serial: #########
2018/10/06 12:57:57 0BBB2118 r   (reader) tntsat [viaccess] provider: 1, id: ####################, sa: ########, geo: empty
2018/10/06 12:57:58 0BBB2118 r   (reader) tntsat [viaccess] provider: 2, id: ####################, sa: ########, geo: 03 FF FF 00 
2018/10/06 12:57:58 0BBB2118 r   (reader) tntsat [viaccess] CA 28 initialisation successful!
2018/10/06 12:57:59 00000000 s     (main) init for all local cards done
2018/10/06 12:57:59 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2018/10/06 12:57:59 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2018/10/06 12:57:59 00000000 s (anticasc) anti cascading disabled
2018/10/06 12:57:59 3A2A8DCF c   (client) plain dvbapi-client granted (dvbapiau, au=auto (22 reader))
2018/10/06 12:57:59 3A2A8DCF c   (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
2018/10/06 12:57:59 3A2A8DCF c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2018/10/06 12:58:02 3A2A8DCF c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 1811 ECM_PID: 00A5 PROVID: 003311 
2018/10/06 12:58:02 3A2A8DCF c   (dvbapi) Demuxer 0 ecmpid 1 CAID: 1811 ECM_PID: 00A6 PROVID: 003315 
2018/10/06 12:58:02 3A2A8DCF c   (dvbapi) Demuxer 0 ecmpid 2 CAID: 1863 ECM_PID: 00B0 PROVID: 003342 
2018/10/06 12:58:02 3A2A8DCF c   (dvbapi) Demuxer 0 ecmpid 3 CAID: 1883 ECM_PID: 00B1 PROVID: 003311 
2018/10/06 12:58:02 3A2A8DCF c   (dvbapi) Demuxer 0 ecmpid 4 CAID: 1863 ECM_PID: 00AB PROVID: 003343 
2018/10/06 12:58:02 3A2A8DCF c   (dvbapi) Demuxer 0 ecmpid 5 CAID: 0500 ECM_PID: 00B4 PROVID: 032830 
2018/10/06 12:58:02 3A2A8DCF c   (dvbapi) Demuxer 0 ecmpid 6 CAID: 0500 ECM_PID: 00B5 PROVID: 032920 
2018/10/06 12:58:02 3A2A8DCF c   (dvbapi) Demuxer 0 ecmpid 7 CAID: 0500 ECM_PID: 00B6 PROVID: 032940 
2018/10/06 12:58:02 3A2A8DCF c   (dvbapi) Demuxer 0 ecmpid 8 CAID: 0500 ECM_PID: 00B8 PROVID: 043330 
2018/10/06 12:58:02 3A2A8DCF c   (dvbapi) Demuxer 0 ecmpid 9 CAID: 0500 ECM_PID: 00B9 PROVID: 030B00 
2018/10/06 12:58:02 3A2A8DCF c   (dvbapi) Demuxer 0 found 10 ECMpids and 5 STREAMpids in caPMT
2018/10/06 12:58:02 3A2A8DCF c   (dvbapi) Demuxer 0 trying to descramble PID 9 CAID 0500 PROVID 030B00 ECMPID 00B9 ANY CHID PMTPID 0064 VPID 006E
2018/10/06 12:58:02 3A2A8DCF c   (dvbapi) Demuxer 0 found 10 ECMpids and 5 STREAMpids in PMT
2018/10/06 12:58:02 3A2A8DCF c      (ecm) dvbapiau (0500@030B00/131A/21FD/168:C10B857907DB7C12CEE23365ECE0C5A7): not found (546 ms) by tntsat - FRANCE 4 (key to use is not the curren
2018/10/06 12:58:03 3A2A8DCF c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 9 disabled ecmpids!
2018/10/06 12:58:03 3A2A8DCF c   (dvbapi) Demuxer 0 trying to descramble PID 9 CAID 0500 PROVID 030B00 ECMPID 00B9 ANY CHID PMTPID 0064 VPID 006E
2018/10/06 12:58:03 3A2A8DCF c      (ecm) dvbapiau (0500@030B00/131A/21FD/168:C10B857907DB7C12CEE23365ECE0C5A7): not found (1 ms) by tntsat - FRANCE 4
2018/10/06 12:58:04 3A2A8DCF c   (dvbapi) Demuxer 0 restarting decodingrequests after 0 ms with 1 enabled and 9 disabled ecmpids!
2018/10/06 12:58:04 3A2A8DCF c   (dvbapi) Demuxer 0 trying to descramble PID 9 CAID 0500 PROVID 030B00 ECMPID 00B9 ANY CHID PMTPID 0064 VPID 006E
2018/10/06 12:58:04 3A2A8DCF c      (ecm) dvbapiau (0500@030B00/131A/21FD/168:C10B857907DB7C12CEE23365ECE0C5A7): not found (0 ms) by tntsat - FRANCE 4

where am I wrong? thanks

percivjr · Oct 6, 2018

dmaimone said:
where am I wrong? thanks

Try this:

Code:

[reader]
label                         = tntsat
protocol                      = internal
device                        = /dev/sci0
disablecrccws_only_for        = 0500:030B00
caid                          = 0500
boxkey                        = 014D902F
deskey                        = 22D60F37567BAB12F505D8C8C71A22E3
ecmwhitelist                  = 0500@030B00:E0,E4,EC,F4,148,14E,15C,166,168,1C4
detect                        = cd
mhz                           = 450
cardmhz                       = 2700
ident                         = 0500:030B00
aeskeys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
group                         = 1
audisabled                    = 1

saintbri · Oct 6, 2018

TNT Sat -Oscam+CCCam

Thanks percivjr

This worked for me

sga · Oct 7, 2018

Your card is v5.

dmaimone · Oct 7, 2018

@percivjr Thanks, but your config doesn't work for me

@saintbri Thanks, this is my card:

Motogato · Oct 7, 2018

dmaimone said:
@percivjr Thanks, but your config doesn't work for me

@saintbri Thanks, this is my card:

deskey=799EE94FE7BC221186CED2B06C8390B6

femi · Oct 7, 2018

Motogato said:
deskey=799EE94FE7BC221186CED2B06C8390B6

... but I think V6 cards dont work with oscam since long time.

Motogato · Oct 7, 2018

femi said:
... but I think V6 cards dont work with oscam since long time.

I do not know, I have v5, but this is v6 deskey

femi · Oct 7, 2018

One of my V6 i have killed with oscam, the other works in an original receiver.

TNT Sat - Oscam + CCCam

bigapple

Registered

mark21

femi

percivjr

Registered

mark21

tolive

Levis 618

Registered

mark21

percivjr

Registered

saintbri

mark21

dmaimone

percivjr

Registered

saintbri

sga

dmaimone

Motogato

Registered

femi

Motogato

Registered

femi