MastaG image for many receivers: 27th June 2016.

gorski

Registered
Messages
1,553
Thanx MastaG, MX3L, Taapat, athoic, SSS & others!

June 27th, 2016 OpenPLi 4.0 by MastaG with IPTV and Latest GStreamer 1.9.0.1

-OpenPLi 4.0 v19 by MastaG with IPTV (1300+ FREE IPTV Channels) for Japhar NC3 SuperSim3

jzi3r6.jpg


Here s a new batch of images based on OpenPLi 4 with many contributions from various openpli.org forum members and some bits taken from oe-alliance. So, this is basically a tribute to them

It took me a while since I was very short on time and I had to re-install my build-rig, move to a new feed-server etc...

SO DUE TO A NEW FEED-SERVER ONLINE UPDATE FROM PREVIOUS IMAGES IS NOT POSSIBLE!
DON T TRY TO CHANGE THE URL IN THESE OLD IMAGES SINCE THERE S BEEN TOO MANY CHANGES WHICH WILL BREAK THINGS!
PLEASE FLASH A CLEAN IMAGE INSTEAD!


So here s what's up:
- Brand new bootlogo thanks to .:MarcinO:.
- OpenPLi enigma2 rev: 4bf2f1e45593065f9e2b4563f30463487b727c94
- OpenPLi oe-core rev: d76cfe6a39c6613ac77578840b214f0f1e748a39
- Taapat s Fulan enigma2 rev: 2a984c500f5b2ea657f68742b7dc4e47f5586483
- New receivers supported:
* osmini
* osminiplus
* spycat
* spycatmini
* et7000mini
* xpeed lx
* xpeed lx pro

- New feed server located in Europe thanks to the Japhar team!
- New Japhar IPTV list
- No more use of UPX compression on ARM platform (should fix the Vu+ Solo 4K build)
- Latest gstreamer 1.9 revision from master branch
- FFmpeg 3.0.2 with extra options enabled (based on oe-e recipe)
- Kodi 16.1 for Vu+ Solo 2, Solo Se, Duo 2, and Solo 4K (thanks to mx3L for his bsp + recipes)
- More wifi drivers (mt7601, rt7777 etc..) taken from oe-alliance
- Slightly newer v4l modules for kernel 2.6.18 (dm800)
- New version of mx3L s serviceapp now supports EPG and embedded subtitles
- New version of exteplayer3
- Flash extender PPanel for dm800, dm800se and dm500hd (* Please read below)
- Many other changes I forgot to mention...

Known issues:
- On spark7162 (and 7111 probably as well) fragmented streams such as hls (m3u8) will skip and freeze a lot.
This happened sometime after the official Gstreamer 1.8.0 release and I didn t found the cause yet.
It is not related to the dvbmediasink since it doesn't happen on mips receivers and the code in the dvbmediasink didn't change.
Configure your streams to play with exteplayer3 instead, read below.

-Some Dreambox remotes may behave very sensitive.
This causes button presses to register multiple times instead of just once.
As a workaround you can adjust the key interval:
Go to: Menu - System - Input devices - dreambox remote control (native).
Set "Change repeat and delay settings" to yes
Set "Interval between keys when repeating:" to 200ms or 300ms.
Press green button (OK)
Now set the same delay for: "dreambox advanced remote control (native)" as well.

-DM800 first boot will take a while, please be patient. The next boot will be faster.

Flash extender for DM800, DM800Se and DM500HD:
Since these receiver only feature 64MB of internal flash space, I've been unable to ship all packages.
ffmpeg, exteplayer3, gst1.0-libav, mediaplayer2, iptv player, subssupport etc.. are missing due to insufficient space.
That s why I ve created a simple PPanel script for moving the entire internal flash to an external storage device such as internal hdd or usb disk.
The PPanel will also install all the missing packages for you.
So you can have all the bells and whistles like the other receivers

However, please note that:
- It will format your storage device thus deleting everything.
- It s not compatible with other flash-extenders such as barry alen, multiboot etc...
- You ll need a working internet connection when running the PPanel or else it cannot install the missing packages.
- You need to patient! As the script runs you ll only see a black screen which an take up to 15 minutes depending on the size/speed of your storage device and your internet connection.

You can find it under Blue Panel -> PPanels

ny7885.jpg


ServiceApp and exteplayer3:
Thanks for the hard work from mx3L and samsamsam you can now play your IPTV streams with exteplayer3 or gstplayer instead of the default dvbmediasink.
Especially using exteplayer3 will give much better performance on playing HLS streams compared to gstreamer + dvbmediasink.
For example, playing DJING underground 720p never worked very well on my DM800HD and now it does'

You can read all about it on OpenPLi forum...

In a nutshell, here's how it works.
In your /etc/enigma2/ directory you have your channel bouquets with the .tv and .radio extensions.
Inside these files there s this for example:

#SERVICE 4097:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8:DJING Underground (CDN)
#DESCRIPTION DJING Underground (CDN)

By default this will play with the gstreamer dvbmediasink (which is currently broken for sh4).
If you like to play your stream with exteplayer3 instead you should change the 4097 to 5002, like this:

#SERVICE 5002:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8:DJING Underground (CDN)
#DESCRIPTION DJING Underground (CDN)

You can also change it to play with gstplayer using 5001:

#SERVICE 5001:0:0:0:0:0:0:0:0:0:http%3a//cdn.djing.com/tv/u-05.m3u8:DJING Underground (CDN)
#DESCRIPTION DJING Underground (CDN)

So it's like this:
4097 = default player, which is the dvbmediasink if serviceapp is not enabled
5001 = gstplayer
5002 = exteplayer3

Now let's say you'd like to convert your entire bouquet to play with exteplayer3, simply login to your receiver with telnet/ssh (use PuTTY for Windows) and issue to the following commands:

First stop enigma2:

Then change your bouquet to make all streams play with exteplayer3, let's say userbouquet.favourites.tv:

cd /etc/enigma2
sed -i s/^#SERVICE 4097/#SERVICE 5002/g userbouquet.favourites.tv

Then restart enigma2:

That's it!

You can also make exteplayer3 the default backend for playing back everything.
Go to Menu -> Plugins -> ServiceApp and set exteplayer3 as default.

Keep in mind that with exteplayer3 or gstplayer as default backend you will not have support for external subtitles yet (.srt for example).

That s why I've added MediaPlayer2 and SubsSupport from mx3L.

Please thank mx3L for the hard work he put into this!

DOWNLOAD:

Code:
http://jam2.japhar.com/images/pli/

- Japhar

Code:
DM500HD+ : https://mega.nz/#!3VBXEDhR!xrobDWOeMrFgCqRQTfUSuKlXepof6fB2TcAtv3v6pYA 
DM800HD+ : https://mega.nz/#!nVhQnZYZ!H56CtR356FiFOmM5KesFiSdWv1qTcJemhCY96V53JME 
DM800HDse+ : https://mega.nz/#!nVQFSKbL!ZebU1ZuMEPz275PAyBCV1CV8KcyDKgr295oOS7u9OnM 
DM8000HD : https://mega.nz/#!eFhUmJYZ!SuirJs7XPJ7mrJ32NHblmy_2IOGnIPC4zc8s_eGNfLE

- Ferrari

Code:
VU+ Solo : https://mega.nz/#!2RYnjSIJ!zPjPDdiEsw2X9ZUy9XrFgrKScLuKUO-DM0XstiKuif0 
VU+ Duo : https://mega.nz/#!bZBF0QiS!DV_ymTpS48BYycxqOrUpm2GZvOB5BFByRgTjXuomj3I 
VU+ Uno : https://mega.nz/#!2VAiUIAC!Sf6OYdDSDgAzSgRxMvxx7JPU2k2fE3ZG7V0sLplqEAs

- Lonrisun

Code:
VU+ Solo2 v1 : https://mega.nz/#!PIYSzIJa!TmpDDYZM0yaDXudqewCOklusNT2hIQB5DC3LCh5ts20 
VU+ Solo2 v4.2 : https://mega.nz/#!qZY23JZI!lJKs-lEkIPzmQy_4EQxV0PNfdU2s40wqbOfY2VTUIFY
 
Last edited:

gorski

Registered
Messages
1,553
Additional info re. mounting USB devices etc. Thanx to MastaG, replying to shy11:

shy11, on 28 Jun 2016 - 22:17, said:

MastaG, on 28 Jun 2016 - 21:49, said:
shy11, yes that's because I didn't program the logic to mount using uuid.
And since I cannot predict which device will be "sda" during boot, I disabled support for multiple storage devices.

However, it will simply reformat your hdd using ext3 and it will be labled "hdd" so you can still use it for recordings/timeshift etc afterwards :)
So if have you anything special on your internal hdd, you could backup it to your PC.
Then remove the usb flash disk and run the PPanel.
After it's done, reboot (so it boots from hdd) and restore your data back from your PC to your dm800 :)
Many Thanks for reply.

I have lot of movies 200GB plus on my internal HD. Very difficult yo backup and restore.

Can I do following,

- disconnect my internal HD physically.
- restart my DM800HD
- run PPanle script to expand to USB
- once done, reconnect my Internal HD

Yes that should work, but there's a chance your receiver will not boot once you put back your internal HDD.
But it's an easy fix..

Do exactly like this:

1. Disconnect your internal HDD and only connect your USB pen.
2. Boot your receiver and run the PPanel to move everything over to USB.
3. When done, reboot your receiver to verify that it can boot from USB.
4. If all OK, turn off your receiver and connect the internal HDD again.

Now if you find your receiver FAILS to boot after connecting the internal HDD do the following:
(only do this if your receiver doesn't boot with internal HDD connected)

5. Disconnect the internal HDD again but leave the USB pen connected.
6. Boot your receiver again and login with telnet, now issue the following two commands:
Code:
mount -o remount,rw /boot
and:
Code:
e2label /dev/sda1 usb
7. Now edit the following file: /boot/autoexec.bat
Change:
Code:
root=/dev/sda1
to:
Code:
root=/dev/sdb1
8. Power on off your receiver, connect and connect the internal HDD again.

It should now boot with both USB pen and HDD connected and the USB pen will be your root-filesystem
 

gorski

Registered
Messages
1,553
Support for all m*e*t*a-odin receivers has been added...

MACHINE_DRIVER = "\
${@base_contains('ODINMODEL', 'classm', 'odinm7' , '', d)}\
${@base_contains('ODINMODEL', 'axodin', 'odinm7' , '', d)}\
${@base_contains('ODINMODEL', 'axodinc', 'odinm7' , '', d)}\
${@base_contains('ODINMODEL', 'starsatlx', 'odinm7' , '', d)}\
${@base_contains('ODINMODEL', 'genius', 'odinm7' , '', d)}\
${@base_contains('ODINMODEL', 'evo', 'odinm7' , '', d)}\
${@base_contains('ODINMODEL', 'galaxym6', 'odinm7' , '', d)}\
${@base_contains('ODINMODEL', 'geniuse3hd', 'e3hd' , '', d)}\
${@base_contains('ODINMODEL', 'evoe3hd', 'e3hd' , '', d)}\
${@base_contains('ODINMODEL', 'axase3', 'e3hd' , '', d)}\
${@base_contains('ODINMODEL', 'axase3c', 'e3hd' , '', d)}\
${@base_contains('ODINMODEL', 'maram9', 'odinm9' , '', d)}\
"

It doesn't mention X Solo Mini 2 though...
 

gorski

Registered
Messages
1,553
Search on OpenPLi forum, m8... ;) In the meantime....:clapping:
- Based on OpenPli 6* by Japhar
- Latest Stable GStreamer
- Python 2.7.13
- Feeds online (For Wifi/DVB-T Dongles)
- AC3+/DDP/EAC3 support
- Triple/Trial Tuner supported
- DVB-T USB, Trial Tuner, from JAM (Hauppauge, A867, etc)
- Wifi Realtek, Ralink, Mediatek Supported
- IPTV Support with Built-in
1300 Free To Air FREE IPTV Channels from their broadcaster
100+ VoD Free To Air Public Domain Movies and more coming soon (Charlot, Keaton, etc)
- JAM 5.3 built-in (Plugins/Addons)

We added more images for Japhar NC3 Sim into your Images Sections, as well as updated OpenBlackHole, DE-OpenBlackHole and BlackPole images

(...for all things Japhar go to the usual place...)
 

Buc61b

Registered
Messages
18
The last I used from him and still rocks

e92812708ea1b6c61d3774852b1a5b71.jpg


5c06a5402bb9fe057fe086df76b55ac6.jpg


Franc skin rocks too as well the swap I ve learned from you hehe lol

Regards

Veliki pozdrav za tebe i franca, lijepo je vidjeti vas da ste dobro i aktivni...

Cheers
 
Top