Vu+Duo Black Hole Mgcamd 1.35 Setup?

Why you don´t take the latest version? It´s version 1.38 and here you can find it!

Copy the file to /tmp on your STB and then you can manual install the file over the menu.

No, you don´t have to unpack the file!

Only downloade the file and then copy it to /tmp. And now you can manual install the file.

Yes, just copy the file to /tmp. And then install the file (green button -> yellow button -> Manual Install Bh packages).

ive been trying to set this up but not had any joy so far ive no downloaded the 1 from here this is what ive done so far i want it to run with cccam i did find this on another forum but it dont work can some1 give me some help please

ive installed the files and there is 7 so do i delete the rest and just keep cccamdlist and mg_cfg ? what ive done is this

cccamdlist C: 192.168.xx.xx port user password then in my cccam config ive done this
cccam cfg F: user password port 192.168.xx.xx is this right so far the port user and password are the same and i altered the script to this

#!/bin/sh

CAMNAME="CCcam 2.0.11-Mgcamd 1.38"

remove_tmp () {
rm -rf /tmp/ecm.info /tmp/pid.info /tmp/cardinfo
}
case "$1" in
start)
remove_tmp
/var/bin/mgcamd_1.38 &
sleep 15
/var/bin/CCcam &
;;
stop)
touch /tmp/mgcamd_1.38
sleep 5
killall -9 mgcamd_1.38 CCcam 2>/dev/null
sleep 2
remove_tmp
;;
*)
$0 stop

i dont have the files on here i was looking on the net but this is what ive done so far but like i said nothing open i have v+duo with black hole 1.7.8 on it help please. thanks

ive now downloaded files from ere but can find any with mgcamd with cccam x x x is there 1 and how do i set it up thanks

well seems nobody knows how to set it up

If you have the ts panel installed you will find it there,just download it

Hi all, Got Vu+ duo, BH 1.7.4, MGcamd 1.38 all working on Bulsatcom till about 10 days ago, now Nova sport, Diema etc blank (already tried updating softcam keys) any ideas !!!

minicats should be working

jrbmw said:

If you have the ts panel installed you will find it there,just download it

Click to expand...

but how do i configure it ie with cline and fline or can it be done with nline so my cccam peers are still connected to me. i know you can run them both together but i need help setting it up. do i have to oenp a different port for mgcamd.now do you understand what im trying to do thanks for your reply.

does anyone know what ftp username and password is for blackhole 1.70 on my vu+duo v3 clone tia stef

change on mg_cfg

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 02 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 32 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 02 }

# newcamd dead routes connect retry, sec
Q: { 10 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 06 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 04 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 11 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

its work for me on blackhole 1.7.9 with ultimo

ty for your help

Hello,
How can I stop my membership??
Jack van Herp

what channels openned on 19.2 and 13?