Misselaneous-DM7000-Images

Status
Not open for further replies.

marce

VIP
Messages
7,115
Backup ds7000-v36-BU_8.4.08

ds7000-v36-BU_8.4.08

Description:

ds7000-v36-BU_8.4.08





Backup für DB 7000 Stick,HDD,CF

.

Bitte mit Flashwizard installieren.

Cam's

Scam 3.29a P., Polsat ,TPS AU

Camd 3.900

Mgcamd 1.29a

Evocamd 2.17

Cccamd 2.0.8



Newcs 1.50


Viele Plugins, Tuxwetter
Alle Sprachen zur Auswahl


Hacksat-v8a keys Updater


k... Stand 8.4.08
 
Last edited:
B

boxgot

CLImage OpenPanel Special Edition 7k

CLImage OpenPanel Special Edition 7k


Hi Leute,

Ich habe mal ein kleines Image gebastelt.

Auf den Gelben Knopf ist OpenPanel.

Das Image ist für die Scripter unter euch gedacht, und hat eine erweiterte busybox (ähnlich der des Gemini).

Darum sollten auch die gemini OpenPanel scripte drin laufen. Es ist sogar noch printf und

cut mit drin.

Achtung: das Image ist brand neu, in den letzten paar Tagen hat sich sehr viel im CVS getan.

Zeitversetztes Fernsehen...

deshalb wird die Installation als usb/cf/hdd Image nur mit einem sehr neuem Flashimage funktionieren.

mit ein wenig Gedult ging es bei mir auch noch unter Gemini 4.3 Flashimage

Also viel Spaß

Emanuel
 

elgeneral

Registered
Messages
7,811
New*Zombis TDW Backup vom 10.08.08

New*Zombis TDW Backup vom 10.08.08

---------------------------------------------------------------------------
-----

Zombis TDW Backup"

---------------------------------------------------------------------------
-----

Code:
Damit die Zeit nicht so lang wird bis das neue TDW Image raus kommt hier nun ein überarbeitetes Backup des TDW 1.61 von mir.Es ist für die 7000 dream und von mir nur im Stick getestet nicht auf der HDD.
Das backup ist 18,7 mb groß und braucht zur Wiederherstellung ca. 50,7 mb.
-Das Backup ist so groß da es ein umfangreiches Picon Packet enthält inklusive aller Optionskanäle für Premiere Direkt und Erotic + fast alle Premiere Sport Picons(wird noch erweitert)
-diese picons werden ganz normal über die optionstaste im skin angezeigt.
-Plugins können über dreamtaste umsortiert und umbenannt werden.
-Zeitversetztes TV ist möglich sowie das verschieben des var bereiches
-PicViewer,swap manager,LAN-Control und Inadyn sind im image eingebaut
neu* Fritzbox Anrufmonitor ohne Modifikation der Fritzbox ist im Image eingebaut und startet beim hochfahren des Image mit.
neu* Moviecutter geht jetzt wieder und ist übers Openpanel aufrufbar/einstellungen können dort vorgenommen werden und es gibt auch eine Anleitung zur Benutzung des Moviecutter.

# Das image enthält: 5 Emus + NewsCS 1.50 (dies kann per menü zu jedem emu dazugeschalten werden)

1.Scam 329a
2.Camd3 900
3.Evocamd v2.17
neu* 4.Mgcamd v1.30d
neu* 5.CCcam 2.09


# 15 Plugins: + OpenPanel + Fleximenü

Plugin manager wird mit 1x Gelb gestartet
OpenPanel manager wird mit 2x gelb gestartet
Werbezapper wird mit 3x gelb gestartet

Plugins:=1xgelb

Tuxbox Commander 1.16
Bild im Bild Plugin 07
Multi Pic in Pic
Telefonbuch
Taschenrechner
EasyLogo 1.2
LCD Animations Player
Satfind LCD/TV
Analoge LCD-Uhr
adenin´s Satfinder
lcd circle
LogCs 1.36
CSG Image manager
Multiview mv3.53 (über rote taste als extepg aufrufbar)
Tuxtext 1.99


OpenPanel (neues überarbeitetes Menü):=2xgelb

1.Multimedia:

Jukebox
DreamCast v0.22/LCD (Internetradio + Streamripper)
DVD Brenner
DVD Player
Audio cd Player
VLC Player
start streamingserver
stop streamingserver
neu* dreamMovielist 2
neu* (überarbeitet) Moviecutter+Anleitung/Einstellung

2.Web Plugins:

- Tuxmail P1.47 / D1.48 (man muß seine eigenen Daten in die tuxmail.conf eingeben sonst geht es nicht)
- New Tuxweter Plugin v3.14
- RSSx Newsreader
- Hacksat Downloader v9b

3.Web Script:

- wiki Suche
- Omas rezepte
- fussball alltab
- Stauinfos
neu*- Flohmarkt Termine
neu*- Sat news
neu*- Sportkalender 2008
neu*- Lotto
- Übersetzer

4.Screenshot Menü (damit macht man Einzelbilder,Bilderserie oder OSD Screenshot´s)

5.Fleximenü:

RemTimer v1.3a
SMS an andere boxen senden
Kino und filminfo v0.6
unser sonnensystem
Spruch
Filme heute
Imdb info
serien info
Ebay wap suche
Telefonnummer suche
Fritz!Box infos ´neue version´
Routenplaner

6.Tuxcal P1.06/D1.11 (man muß seine eigenen Daten in die tuxcal.conf eingeben sonst geht es nicht)
neu*7. Sendersuche
neu*8.EPG find v3.03 in Verbindung mit MV.Epg

9.Untertitel Plugins:

gSUB Config v2.07
DVB -Untertitel v0.43
Dreambox DrTic v2.2

10.Benutzer script:

NFS server starten (dieser ist im image enthalten leider noch ohne config menü)
Cyptinfo
Netsat
Show Mounts

11.Werbezapper>(kann auch mit 3x gelb ausgeführt werden zum schnellen zugriff)
12.Beispiele zum selber machen sind auch enthalten

# 3 Sprachen Deutsch Englisch Türkisch

# 22 Games:+ TuxFrodo C64 EMU + Sinclair Spectrum Spiele Emu mit 4 weieren Spielen

1.lemminge
2.pacman
3.Pacman 2 - CoNfUsIoN
4.Snake
5.Snake 2 - Challenger
6.solitair
7.tetris
8.kniffel
9.mastermind
10.minesweeper
11.Schiffe versenken
12. 4 gewinnt
13.tankwars
14.walls
15.Bloks
16.sokoban
17.Sol
18.schach v1.9
19.Sudoku
20.Mühle
21.Senso
22.eSame
23. Sinclair Spectrum Spiele Emu (4 Spiele enthalten)
24. TuxFrodo C64 EMU (Spiele müssen nach hdd/c64games )sind nicht enthalten



# Settings sind für 2\1Diseqc 1.Astra 2.HB. voreingestellt aber ihr könnt ja Eure einspielen.

# 2 Skins,da ich nur diese Skins nutze wird es in meinen backups keine anderen Skins geben .
wer andere Skins haben möchte kann sie sich laden oder selber einspielen.


1.Nemesis Mod fsenes for TDW
2.Army TDW Mod Zombi

# Im Premiere Direkt & Sport Portal wird jetzt auch EPG angezeigt (geht noch nicht richtig und auch nicht bei den einzelnen Optionen )

# LCD animation beim start ,große uhr usw.

# Cifs,NFS und Samba sind im image enthalten

Ein an das gesamte TDW Team und alle die an diesem Image gearbeitet und die bei der Entwicklung geholfen ha
 

k@lkov

Super VIP
Messages
10,003
PB ENIGMA DM 7000 Version 3.0

Code:
23.12.2008

PB-Enigma v3/v7

[B]Changelog:[/B]
An dieser Stelle sollte ein Changelog erscheinen. Das 
würde aber so lang werden, das es niemand mehr liest.

[B]v3: Dreambox & IP-Box
v7: DBox2[/B]

Nach wie vor handelt es sich bei unseren Images um enigma1-Images. 
v3/v7 sind unsere Versionnummern

Die DBox2 ist nur schon viel länger dabei, darum ist dort 
die Versionnummer höher
Alle Images sind bis auf Unterschiede in den Treibern oder 
durch (mögliche) hardwareunterschiede bedingt, identisch.

Generell ist das v3/v7 kein Update auf v2/v6, sondern ein fast
 komplett neues Image. Daher auch die lange Entwicklungszeit

Alles was ihr von den alten Images kennt oder schätzt ist weiterhin
 vorhanden. Nur liegen die Menü's teilweise an anderer Stelle

[B]Wir beginnen untypisch mit einer Danksagung:[/B]
Danke an Dr.Best und sein Team! Das Merlin-CVS ist fester 
Bestandteil der neuen Images geworden.

Von Merlin wird ab jetzt oft die Rede sein. Viele Funktionen 
basieren auf dem Merlin

So, jetzt das wichtigste zuerst!
Das Image ist zu 100% abwärtskompatibel! Es ist sogar "switchbar".
Wer z.B. eine DBox2 mit MMC oder eine IP-Box mit USB/DOM und
ausgelagerten var hat, kann das neue Image bedenkenlos flashen 
und auch wieder zurück.
Was incompatibel verändert wurde, wurde so realisiert 
das ein Zurück möglich ist

Ihr werdet einge gewohnte Menü-Punkte nicht mehr 
finden! Aber keine Sorge, sie sind da!

Die Doku hängt leider extrem hinterher, wir werden 
wohl eine neue schreiben müssen.

Zunächst, schaut in das Menü. Es wurde aufgeräumt 
und sollte zum Großteil wie gewohnt aussehen.

Im PB-Menü hat sich jedoch einiges getan.
Auch im Panel unter der blauen Taste hat sich viel getan
Dort findet sich jetzt das PB-Expertenmenü und darin die Merlinverwaltung
Was sollen wir zu Merlin sagen?
Permanentes Time-Shift
var-Verwaltung
swap-Verwaltung
jede Menge spezifischer Einstellungen wie ein ZAP-OSD
HDD-Verwaltung
Filmverwaltung
Spezielle Timerverwaltungen
Eine Verwaltung für den var-Bereich, ähnlich unserer Auslagerungen
Partnerbox-Verwaltung (eine Box verwaltet das EPG von anderen Boxen, 
Dream auf DBox2 oder IP und umgekehrt möglich!)
und das sind nur ein paar Highlights

IP-Box Spezial: Multi-Boot von Images auf USB oder anderen Medien 
wenn PB im Flash ist!

[B]DREAM-BOX-SPECIAL:[/B] Für oe-Images (DM 500+, DM 600, DM 7020) 
können Updates per Itsy Manager direkt aus dem Board gezogen werden.

[B]NICHT KOMPATIBEL:[/B]
Die picons! Die alte Verwaltung gibt es nicht mehr... löscht am besten die alten runter
Die neuen sind referenzgebunden. Solche picons findet ihr z.B. bei enigma2. 
Ihr könnt jedes e2-Bundle einsetzen! Eine XML wird nicht gebraucht!
Den Pfad für die picons im Merlin-Menü festlegen, fertig!

Die Emu-Verwaltung
Für alle die Wissen, was die emulatoren.xml ist ist: Es gibt sie nicht mehr.
 Sie heißt jetzt camd.xml, liegt an gleicher Stelle und kann zu jedem Emu 
bis zu drei Emu-Zusätze verwalten. Bitte beachtet: Was möglich bzw. 
nötig ist, hängt vom Emu ab, der verwendet wird!

[B]Damit kommen wir zu einem ganz wichtigen Punkt:[/B]
Das Emu-Managment!
JEDER Emu, gleich welchen Namens, wird unterstützt! Sofern nicht in 
Online-/Offline-Update, kopiert den Emu nach /tmp/camdinstall und 
dann per camd-Installer installieren
Emu-Auswahl: Sofern einer läuft, diesen beenden...neuen mit links/rechts 
auswählen und starten!
GANZ WICHTIG: Wird ein Emu aktualisiert, wird der alte nicht mehr 
überschrieben! Es können also alle camd3-Versionen im Image sein!
Für Boxen ohne HDD/CF/USB/MMC etc. heißt das: Erst den alten 
Emu löschen, dann aktualisieren oder das Image platzt!

Die Fehler der alten Images wie Sender die verschwinden etc. 
sind alle Geschichte!

[B]In den Plugins:[/B]
Drückt Menü und ihr könnt die Plugins ordnen, die Farbtasten können 
auch belegt werden!
Empfehlung für oe-Images: Legt den Itsy Manager auf blau... blau, 
blau, blau = Itsy Manager

Wir werden sehen, das wir eine neue Doku aufbauen! Bis dahin gilt: 
Auch wenn vieles anders aussieht oder an anderen Positionen liegt, 
funktioniell passt die Doku in den meisten Fällen!

So, und jetzt wünschen wir Euch viel Spaß mit dem neuen Image!
 

ANTR@G

VIP
Messages
1,086
Gemini v4.6 7000

Gemini v4.6:

Technical Infos:
* Enigma of: 19.12.2008
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.4-Expert
* Busybox 1.01
* Tuxtxt V1.104
* CIFS 1.44

Remotecontrol:
* BLUE - Blue Panel (BP)
* 2x BLUE - BP -> Extras/Settings
* YELLOW - Quick-Button (can be configured via BP)
* RED - EPG list for active channel
* 2x RED - EPG style menu
* GREEN - subservices

Addons:
* own Addon-Server via Internet
* adding additional functions via internet from the Gemini-Server and install them automaticly
* Personal Addon-Server can be used (configuration via /var/etc/useraddon.xml)
* Create your own Satellites.xml, which only contains the Satellites you realy need

Camd:
* Different Camd´s can be linked to channels/provider (Autocam)
* Changeing the name and settings via own menu.
* Creation of a 2nd socket (/tmp/cam1.socket)

Daemon / Server / Clients:
* Automatic test wehter the box is connected with the internet or not (Well be shown in the infobar)
* Dropbear (SSH) now switchable (DM500 - DM7000: Standard->off)
* added editor to configure the cron-daemon
* Little Apache (HTTP-Server based on HTTPD)
* Upnp Client and Server (for DM500/56x0 must be installed from Gemini-Server as addon)
* Inadyn (Daemon for different DYNDNS-Services)
* Settings for syslogd
* Dreambox can be used as printserver (BP->Extras/Settings->Printer (LPD), FAQ can be found in the database
* Automount, for examples have a look at: /var/etc/automount.conf. Devices, NFS or CIFS will be automatically mounted. Ideally for DVD- or Net- Drives (Editor can be found in the BP)
* NFS-Server (based on the NFS-Kernel-Modules, nor for DM500, DM500+ and DM56xx)

Infobar / OSD / Skin / Background-Pictures:
* Position of the Infobar can be changed without editing the skin files
* Provider, Frequencies, Symbolrate and FEC can be displayed in the Infobar (If the Skins matches this function)
* Display of EMM, ECM or "Expertinfos" are switchable
* Picon (displaying the Channel-Logo)
* Extensions for Skins (Thumbnails, 3D-Font, Pictures for Progressbar)
* Background picture can be turned off (Plasma - Fix)
* Backgroundpictures (Radio- and File Mode) can be used as Screensaver.
* Changing Bootlogo via menu ( 7020 only)
* Backgroundpictures and Bootlogos can be created, testet and used direct on the Box (out of JPG, BMP, GIF or PNG)
* Showing Onlinestatus when the Box is connected to the Internet (must be activated in Expert Menu -> Network)
* Moved Gemini events (Ripper, Calendar, email-Checker) from BluePanel Menu into the infobar (eLabel-Name = geminievent)

Files / Devices
* Support for CDROM/DVD no matter using IDE or USB
* Random function for all kind of soundfiles
* Backup function
* 2 new root entries for music and pictures can be created in the filemenu (BP->Extras/Settings->Root-Entry)
* support for the bigger remotecontrol on 500 and 500+ (normaly shipped with 70XX/600pvr - activate on BP->Extras/Settings)
* Support for FLAC, OGG/Vorbis and WAV (please install codecs in the BP)
* Functions for SWAP (virtual memory). Create, delete, size and location.
* Device-Manager for HDD / DVD / CF / USB
* Drivers for USB-Cardreaders are now included in the Image but are not loaded!

EPG
* additional functions (e.g. dishnetwork, cache, location)
* search all channels for an event or an own string. Timers can be added immediatly (Press "Menu" in the epg or use use BP -> extras -> EPG-Refresh)
* Infos of the recorded movies can be shown without starting the movie
* refresh EPG using the enigma-timer (BP -> extras - EPG-Refresh)
* autosave for EPG-cache ( BP -> Extras/Settings -> EPG-Settings)
* Duration of current event in the programm overview ( Menu -> Info -> EPG)
* general information about the EPG Data (BP -> Info-> EPG-Settings)
* a time period for the EPG Data can now be defined (BP -> Extras/Settings -> EPG-Settings)

Extras:
* Dreamnetcast (shoutcast-player) with Streamripper (direct recording from server and coding into mp3´s) (for DM500/56x0 must be installed from Gemini-Server)
* RSS und Weather Plugin (for DM500/56x0/7000 must be installed from Gemini-Server)
* System Info: Many extra box infos like HDD temprature, stream-rates (>=7000) or kernel-, memory- and prozessinfos.
* Own scripts can be started via Blue Panel
* Changing the recording parameters (extra before- and after- recording time, storage location and recover-function for your records)
* change the settings for recording (before Time, after-recording time,, location and recover-function)
* Create your own satellites.xml including only the satellites you really need.
* Quick-Button-Menu: Many extra features for the yellow button (e.g permanent clock in OSD, freeze Image, audio selection)
* alarm-clock with volume offset playing own WAV-Files
* Calendar for iCalendar format + reminder ( Supported by MAC, KDE, Thunderbird, Goole calander, Rainlendar...). Standard folder is /var/etc/ical (for DM500/56x0 must be installed from Gemini-Server)
* Support for DreamDVD no matter wether a DVD-Drive is available or not
* New screenshot routines (have a look at the Webif)
* eTorrent - a torrent client based on ctorrent. Can be managed completly over the OSD (for DM500/56x0/7000 must be installed from Gemini-Server)
* disable the TV - output while taking a recording, streaming a movie and manually (usefull for boxes with very low lan-speed)
* update system time via transponder or internet ( Protocol RFC868 )
* eMail-Checker extended with SSL support (Overview of your POP3 or IMAP accounts)
* create password using the BP (BP -> Extras -> Pwassword)
* rotate al kind of pictures. Also automatic rotation using EXIF (must be activeted using the menu)
* Re-Zapp, zapps after X-minutes to the actual Channel (BP -> Re-Zapp)
* Displays, wether the box is an original one or not (using MAC adress, BP -> System -> Dreambox -> Manufacturer)
* the Jukebox, Please install as addon.

Recordings:
* records into different folders ( the settings have to be done in the Timer-Menu)
* LED´s are flashing during record (Boxes without display). Must be set in BP -> Extra -> Record
* import of recorded movies every time you enter the Video-Menu or only once when the Box ist starting (BP -> Extras -> Record)
* Records can now be done in the new Eniga2 format (***** files) or as usal as "recordings.epl" (BP -> Extras -> Record)

New:
* Webcam Viewer for viewing images from the Internet, configureable via XML config (only Still, no interval as we have at E2)
* Now you can perform a network-settings test (new construction + wizard)

Fix + update:
* Dreamnetcast
* RSS-Reader
* Jukebox
* Changed OSD & Video grabbing
* have a look in the CVS

Interfaces WebIF:
http://127.0.0.1/cgi-bin/GeminiInfo
http://127.0.0.1/cgi-bin/StopCam?ZAHL (ZAHL = number of cam)
http://127.0.0.1/cgi-bin/StartCam?ZAHL (ZAHL = number of cam)
http://127.0.0.1/cgi-bin/InitCam
http://127.0.0.1/cgi-bin/ResetCam
http://127.0.0.1/cgi-bin/setKey?typ=...est&val=blabla
http://127.0.0.1/cgi-bin/getKey?typ=...tedvb/int-test

We'd like to thank everybody who paricipated in the "Gemini suggestion" thread. Unfortunatly many things can not be realized from our side.
This images doesn't contain any keys or softcams. Backups or other modified Images are not from us and won't be supported!
Gemini Images may only be used on receivers of the manufacturer Dream-Multimedia-TV.
The use of this Image is on your own risk.

Recommendation:
If you don't install the Image in flash memory, the flash image shouldn't be of a old version. A swap file/partition (>= 16MB) should be present
if several processes running in background. We assume no liability for direct or indirect damage.

Download via Database

Thanks a lot and have fun
Your Gemini-Team

Support: www.i-have-a-dreambox.com
 

elgeneral

Registered
Messages
7,811
Imagen KGD 2.10 dm7000 y dm7020

Version Dm7000 (Flash, Multiboot) y Dm7020 (only Multiboot)

Code:
Lo Primero querias pedir disculpas por tardanza que por problemas ajenos al Team se retraso todo un poquito pero bueno de momento vamos a publicar las imagenes siguientes:


Version Dm500s, Dm500c y equipos compatibles (Flash, Multiboot) 
Version Dm7000 (Flash, Multiboot) y Dm7020 (Solo Multiboot) 
Version Dm500plus (se publicara esta semana o la siguiente como mucho) 

Botones:

Azul(Panel KGD)
Azul Pulsado 2 seg. Infobar (Muestra la info ECM del canal que se esta viendo)
Amarillo(Plugins)
Rojo (EPG)
Help(Ayuda)

En esta nueva version 2.10 hemos intentado seguir con nuestro objeto que era la estabilidad y creo que lo seguimos haciendo, a ello le hemos sumando un nuevo web interface mejorado y renovado, al igual que todo el OSD, skin, infobar, etc.. con cambios y mejoras totalmente nuevas, tambien hemos corregido algunos bugs y sugerencias de versiones anteriores.

El panel KGD se modificado con las siguientes novedades ahora, en este, informa del estado del inadyn, dropbear y programador de tareas por si en algun momento no estubiera cargado o funcionando tambien hemos añadido un barra que indica el espacio de RAM que estamos usando.
En configuraciones hemos añadido un aviso si la memoria es menor a 100Kb que es muy frecuente con el uso de cams y si se diera el caso lo mejor seria reinicar con esto la gente puede evitar los famosos cuelgues que no son por la imagen sino el 99% de las veces porque la memoria RAM es muy justa y se queda sin ella y las cams suelen ser las causantes, tambien si se hace frecuente esto se puede desactivar el aviso en configuraciones.

Y tambien hemos añadido la opcion de activar/desactivar dropbear que es un cliente/servidor SSH que es usado por ejemplo en el Plugin Español EnviarEMMs.
Otros de los cambios esta en el OSD con nuevos menus, opciones, skin, etc.. que podreis apreciar en las capturas
En el EPG hemos hecho mejoras, tanto en el webif como el infobar ahora esta añadido un buscador EPG que permite buscar Eventos.

El Web interface es donde mas trabajo y cambios hemos hecho, se ha hecho todo nuevo a parte de la estetica se ha mejorado la funcionalidad, se añadidod el EMUMANAGER que permite a distancias controlar nuestras cams, activandolas, cambiandolas, etc.. ademas de poder ver en el mismo la info ECM del canal que se esta viendo. Tambien podreis cargar vuestras cams desde el exterior poniendo este comando:

http://IPDream/cgi-bin/Emu?start=nombrecam_emu
http://IPDream/cgi-bin/Emu?start=nombrecam_cam
Tambien en el webif hemos añadido una mejora muy importante que es el Zapstream ahora podras ver en tu propia red o fuera de ella la dream desde el Webif con ninguna PIXELACION, simplemente bajando la ultima version del VLC e instalar con los plugins firefox o Ie, SIN CONFIGURAR NADA MAS ni en al dream ni el PC, solo tendras que pinchar en el boton VLC o Vpid para poder ver el canal sintonizado. Tambien hemos arreglado el WEBxTO y ahora va mucho mas fluido que antes.

Respecto a cambios internos del enigma vamos a destacar los mas importantes ahora la imagen funciona perfectamente en Multiboot en modelos DM500x que antes tenian problemas, tambien se ha añadido uno Accesos directos nuevos para la gente que tienen montados FREENAS tengan mas facilidades,etc... Y el MAS IMPORTANTE SE HA SOLUCCIONADO UN PROBLEMA general que tienen todas las imagenes las del KGD versiones 2.0 o inferiores y tambien las demas de vulnerabilidad, ya que cualquier persona desde la fuera de la red puede extraer informacion de tu dream si se tiene abierto el puerto 80 al exterior, asi que aunque en esta version esta soluccionado LO MEJOR ES NO DEJAR EL PUERTO 80 ABIERTO FUERA DE TU RED INTERNA. Esto ha sido soluccionado por algunos teams sacando nuevas versiones de sus imagenese asi que informaros de la imagen que tengais y si se ha soluccionado el problema

Por ultimo queremos dar las gracias muy ESPECIALMENTE A:

JaBaT, JHOSUA, YOP por todo el curro que se han pegado en la elaboracion del skin... que sin ellos no hubiese sido posible hacerlo.
JaBaT, desarrollador del webIf.

A Foro-Pagando por la ayuda prestada y por dejarnos este rinconzito donde estamos.

Y todos los betatester Laisas, Krusty, Seku, Pinguino, Nozul, pepibumur, pakilloreal y seguro que alguien mas me dejo, lo siento.

Por ultimo darle las gracias al PliTeam por cedernos su Zapstream y en especial a Sjaaky y pieterg.

Imagen 100& spain :thum:
 

k@lkov

Super VIP
Messages
10,003
ipkg system for dm7000

Thx to flashi
Code:
Ich hatte langeweile und habe das IPKG System in E1 eingebaut. 
Es sieht ja so aus als wäre das IPKG system nur für E2 reserviert 
und da ja E2 niemals für die DM7000 rauskommt habe ich das IPKG 
in E1 eingebaut. Die Sachen die Entfernt wurden kann man nach 
installieren. Die IPK dateien einfach nach tmp kopieren und über 
den Package Manager installieren.

[B]Enfernte Plugins:[/B]
1. DreamFlash
2. Movieplayer
3. start Ngrab recording
4. stop Ngrab recording
5. TuxBox Commander

[B]Enfernte Skins:[/B]
1. BlueQT
2. Carbon
3. Bluenigma BIG
4. Neutrino-style
5. Silver Metal
6. Simple and Stylish
7. Simple and Stylish 16:9
8. Simple and Stylish 16:9 SNR
9. Simple and Stylish SNR
10. Screwed Stone SNR

[B]Enfernte Sprachen:[/B]
Alle Sprachen

[B][COLOR="Red"]Im Package.zip enthalten:[/COLOR][/B]
[B]Skins[/B]
1. blueqt-skin_13.04.2009_powerpc.ipk
2. carbon-skin_13.04.2009_powerpc.ipk
3. chk-blue2-skin_13.04.2009_powerpc.ipk
4. neutrino-skin_13.04.2009_powerpc.ipk
5. silver-skin_13.04.2009_powerpc.ipk
6. small-skin_13.04.2009_powerpc.ipk
7. stone-skin_13.04.2009_powerpc.ipk

[B]Games[/B]
1. lemmings-plugin_13.04.2009_powerpc.ipk
2. master-plugin_13.04.2009_powerpc.ipk
3. mines-plugin_13.04.2009_powerpc.ipk
4. pacman-plugin_13.04.2009_powerpc.ipk
5. scummvm-plugin_13.04.2009_powerpc.ipk
6. snake-plugin_13.04.2009_powerpc.ipk
7. soko-plugin_13.04.2009_powerpc.ipk
8. sol-plugin_13.04.2009_powerpc.ipk
9. solitair-plugin_13.04.2009_powerpc.ipk
10. tank-plugin_13.04.2009_powerpc.ipk
11. tetris-plugin_13.04.2009_powerpc.ipk
12. vierg-plugin_13.04.2009_powerpc.ipk
13. yahtzee-plugin_13.04.2009_powerpc.ipk

[B]Plugins[/B]
1. dreamflash-plugin_13.04.2009_powerpc.ipk
2. movieplayer-plugin_13.04.2009_powerpc.ipk
3. ngrab-plugin_13.04.2009_powerpc.ipk
4. tuxcom-plugin_13.04.2009_powerpc.ipk
5. tvlogos-plugin_03.03.2009_powerpc.ipk

[B]Extras[/B]
1. locale-de_13.04.2009_powerpc.ipk
2. tv-logos_04.03.2009_powerpc.ipk

PS. Das Image habe ich auf ein USB-Stick getestet. 
Das IPKG System könnte ja standart im E1 werden
 

k@lkov

Super VIP
Messages
10,003
ipkg system for dm7000

Thx to flashi
Code:
Es gibt ja Leute die kein Linux auf dem PC Installiert haben. 
Ich habe auf mein System MAC installiert und Linux starte 
ich über VMware weill es immer nervt Linux unter Mac zu 
starten wenn ich mall schnell eine ipk datei erstellen will smile ). 
Ich habe dann mall versucht eine ipk Datei unter MAC und 
unter DM7000 zu erstellen. Wie ich es mir schon gedacht 
habe es ging nicht. Ich habe mall ein ipkg-build script für 
mac und die dm7000 hochgeschoben.

- ipkg-build-mac = getestet auf MAC OS X Version 10.5.6 (nur ipk datei erstellen)
- ipkg-build-dm7000 = getestet auf meiner DM7000 mit unveränderten cvs 
  von 26.03.2009 (nur ipk datei erstellen)
 

juli13

Staff member
Administrator
Messages
10,194
ipkg system for dm7000

I've a "ipkg-build" plugin for writing enigma. This is certainly a plugin which does not, however, had long now). I have the plugin as simple as possible. The data on the box and copy over the plugin loaded. Then a few details (package, version, Achitecture etc.) and then save and then click Create and go IPK file

TIP. If you build the window does not close then you can the folder structure of the IPK file created in "/ tmp / package /" Watch.

by flashi
 

k@lkov

Super VIP
Messages
10,003
dm7000 ipkg - 31.05.2009

Thx to flashi
Code:
ein von 26.04.2009, CVS-Image für die 7000er mit Ipkg System:

Es wurden alle Plugins bis auf "Teletext" entfernt.
Es wurden alle Skins bis auf "Screwed Stone" entfernt.
Es wurden alle Sprachen entfernt. Die Default Sprache ist Englisch.
Es können lib Dateien in "/var/lib/" nachinstalliert werden.
Es wurden die Text Dateien "profile" und "default.esml" verändert bzw. 
für das ipkg system angepast.
Der Ordner "locale" von "/share/" nach "/var/tuxbox/config/enigma/" verlinkt.
Die Datei "ipkg.conf" von "/etc/" nach "/var/etc/" verlinkt.
Der Ordner "ipkg" von "/etc/" nach "/var/etc/" verlinkt.
Der Rest der Text und Sripte wurden von mir nicht verändert.

Das Ipkg System habe ich so einfach wie möglich gehalten.
Wenn ihr eigene Server habt müst ihr sie in der ipkg.conf noch manuell 
eintragen. Ein Settings Editor für die "ipkg.conf" wird irgendwann noch 
implementiert
Wenn ihr Manuell eine *.ipk Datei Installieren wollt mus die nach tmp kopiert 
werden und dann über "Package Install" installiert werden.
Nach dem Installieren und einrichten des Image müst ihr als 1 "Package 
Update" ausführen danach könnt ihr die Package dann über "Package Install"
installieren.

vorhandende Server in der ipkg.conf

[B]Package Manager[/B]
1. Package Update
2. Package Upgrade
3. Package Install (online und offline)
4. Package Remove

PS. Die Tv-Logo Einstellung sind ind diesem Image integriert wurden. 
"[6]Einstellungen->[3]System->[5]Benutzeroberfläche->[red]zu.
Einstellungen->[1]TV-Logo Einstellungen"

[B]md5:[/B] de894bc941cf363b529062a8625ac395

src plugins http://dreamboxipkg.kilu.de/dm7000/feed/plugins
src skins http://dreamboxipkg.kilu.de/dm7000/feed/skins
src extras http://dreamboxipkg.kilu.de/dm7000/feed/extras
src games http://dreamboxipkg.kilu.de/dm7000/feed/games
src settings http://dreamboxipkg.kilu.de/dm7000/feed/settings
 

k@lkov

Super VIP
Messages
10,003
MediaVox Team DM7000 - 09.06.09

Code:
[B]Technical Infos:[/B]
* Enigma of: 03.06.2009
* Linux version 2.6.9
* GCC 3.4.4 Original CVS 1.1.0
* Web Interface: Expert
* Busybox 1.0.1
* Tuxtxt v. 1.109
* for use in flash or MB (via NFS, USB, HDD or CF)

[B]Function Buttons:[/B]
* BLUE - Smart Panel
* BLUE > 1s - ECM INFO, EMM INFO e PID INFO
* 2x BLUE - Addons
* YELLOW – Plugins
* YELLOW > 1s – *** - CS Info
* GREEN – subservices
* RED - EPG list for active channel

[B]Features:[/B]
* Nemesis *** Manager 3.0.0
* Nemesis Web-If *** Manager
* Nemesis *** Manager in italian & English
* Independent Start & Stop *** / CARDSERVER
* Advanced Inadyn service configuration, with log manager
* Swap file supported in (HDD CF or USB)
* Path manager panel
- Setting PVR Movie folder
- Setting Picon folder
* Picon support included in Enigma
* Syslog panel
- Start/Stop syslog daemon
- Syslog configuration
- Debugging enigma directly to syslog, no reboot needed!
* Autostandby/autoshutdown (to manage a unwanted reboot)
* Advanced external programs control
* Can start / stop your own binary by panel (see /var/etc/sample_startup.sh)
* Can create your own autostart boot script
  (see /var/etc/sample_startup.sh)
* Support for gSUB via advanced external programs control
* Advanced User Script
* Can run script in kernel mode
* Autofs (see /etc/auto.net)
* Automount (see /var/script/mount.sh)
* Advanced System info (see /var/etc/script.xml)
* Advanced *** info (see /var/etc/emuscript.xml)
* Parental control shortcut
* MediaHighwayEpg
* emm, ecm support

[B]Plugins:[/B]
* Movieplayer
* Start/Stop Ngrab
* No games, get a console :-)

[B]Display Function:[/B]
* New Skin Black-DT2 EDG Nemesis Version By Matrix10
* Display Snr, Agc, Ber
* Display video info
* Display frequency, polarization, symbol rate
* Display *** in use
* Display service providers name
* Display CaID, ProvID, PID, ecm time, hops
* Display Decoding Source (you can hide if you want)
* Display DC as IRDETO in OSD
* Display long date format

[B]Addons:[/B]
* Advanced addons Manager
* Internet addons download with Proxy support (our server is not installed yet)
* Manual addons install, u can install any EDG Nemesis addons
* Remove installed addons

[B]Misc:[/B]
* NFS Server
* Dropbear v0.52 with sftp-server (enable/disbale thru Advanced User Script)
* MaraDNS, internal DNS Server (enable/disbale thru Advanced User Script)
* Support for PL2303 and FTDI USB2Serial chipsets 
  (enable/disbale thru Advanced User Script)
* DVBSnoop
* Etherwake

No ****, No *** included

[B]Regards:[/B]
- Codric for developing
- Blacklamb to make it possible
- @tiSat for testing and for the nice channel lists
- Bootlogo and graphics by SZGY Design
- Skin by Matrix10


SPECIAL THANK’S TO: EDG Nemesis Team, for releasing his source, 
our image based 100% on that!!!!

[B]!!! WARNING - IMPORTANT DISCLAIMER:[/B]
!!! THIS FIRMWARE DOES NOT INCLUDE ****, NOR EMULATORS, 
NOR URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.

!!! EDG-NEMESIS IS NOT RESPONSIBLE IN ANY WAY 
FOR WHAT THE USERS WILL DO WITH THIS FIRMWARE.
 

k@lkov

Super VIP
Messages
10,003
DM7000-ipkg 10.07.2009-sourcen

Code:
Das sind die Aktuellen Sourcen für das Ipkg Gui System 
und TV-Logo System von mir für die DM7000.
 

k@lkov

Super VIP
Messages
10,003
dm7000-ipkg-09.08.2009

Code:
md5: bb9b019054492f1da619988ef41bb68e 
Nach dem Install des Image muss die "install.tar" nach "/var/etc/" kopiert 
werden und dann die Box neustarten um das neue IPKG-Plugin nutzen zu 
können. MFG ripper
 

juli13

Staff member
Administrator
Messages
10,194
ipkg-plugin 7000 -22.08.2009

22.08.2009

The iPKG-PLUGIN is the image for DM7000-ipkg-09082009.img thought! Their is a new iPKG plugin version with integrated editor for ipkg.conf file. Man can at times only server delete and create new server. The editing is unfortunately not yet. Since I still have problems. Your müst simply ipkg.so in the plugin directory of DM7000 -
 

elgeneral

Registered
Messages
7,811
WLG Relax For DM 7000

WLG Image E1 by TeamNTM Relax:take it easy

Code:
Il Team NTM è lieto di presentarvi la WLG Image, nata solo ed esclusivamente grazie alla passione per l'hobby del sat e dell'open sources.
L'immagine si basa sui public sources Nemesis 1.0.

Inoltre sono stati utilizzati dal team PLI (dai sorgenti pubblici OpenPLI), il cardinfo_script e lo streamts (scaricabile dal pannello online).

Ringraziamo tutti coloro che hanno resi pubblici i loro sources, rendendoli un'ottima base di studio.

Il Team NTM ha sviluppato la WLG Image senza emulatori né chiavi in essa contenuti e non supporta nessun tipo di backup o qualunque suo uso illegale. Non si ritiene in nessun modo responsabile dell'uso improprio dell'immagine fatto da terzi.

Si ringraziano tutti i betatester:

reking, onopkos, yu-gi-oh, meganpork, sirietto, seccoleo, filipponokia, cupidz, ^ZioGià^ e Pappa.

Ringraziamenti speciali
(in rigoroso ordine alfabetico)

Fox, Gianathem, matrix10 (per la concessione dell'uso delle skin enigma1), Omicron, Pappa (WLG Picon), piefav e Racale.

Decoders:

Dreambox 7000 - Dreambox 500 - Dreambox 56x0
Ipbox 200 32Mb Ram - Ipbox 200 64Mb ram - Ipbox 250 - Ipbox 350 - Ipbox serie 4xx
Attenzione a non confondere la versione Ipbox200 64Mb con la versione Ipbox200 32Mb. Rischiate il blocco del decoder recuperabile solo con jtag

Ulteriori immagini per altri modelli verranno rilasciate in futuro.

per loggarsi:

login: root
password: wlgbyntm

Enigma cvs del 20.10.2009
Linux version 2.6.9
Web Interface: 6.0.4-Expert
Busybox 1.01

Descrizioni
Bottone BLU = NTMPanel
Bottone GIALLO = lista plugins
Bottone VERDE = orologio analogico
Installazione addons da panel online
Installazione addons manuale
Personal server online
Frontend grafico inadyn
Password manager
Frontend grafico cron daemon
Sposta cartella var
Autospegnimento
Frontend grafico Gestione porte
Frontend grafico dropbear ssh server
Frontend grafico openvpn
Frontend grafico nfsserver
Gestione script personalizzati utenti
Gestione Picon
Manager cartella film
Ram info
Net info
Card Info
Sincronizzazione ora da internet

Il nostro motto è WLG forever

Gracias a ^ZioGià^ y a todos en TeamNTM
 

bellof

Registered
Messages
1,791
Ferrari F2012 Castle Italia multiboot - DM7000

Ha poco a che vedere con la precedente rilasciata alcuni giorni fa, cambiati vari sfondi, dal bootlogo allo scan e radio, da caricare solamente ed esclusivamente in multiboot, si rilascia qui sotto alcuni screenshots

ferrarif12_jlbz5esox.jpg


3a.jpg



5.jpg




6.jpg





DOWNLOAD


http://www.mediafire.com/?if677m47rdc8966
 
Status
Not open for further replies.
Top