SifTeam-DM500plus-Images

vegeku90

Registered
Messages
1,586
SifTeam Presenta.
Dreambox500+


News relative all'immagine 1.8.5.1
-------------------------------------

CAMBIAMENTI ATTUALI:
--------------------

1) Aggiornato libreria libc.so.6 per problemi vari (il dm500 ora ha la sua personale)
2) Creato link per localizzazione in /var/share/locale
3) Tolto openvpn da tutti (in modo di avere un solo pacchetto openvpn)
4) Cambiato i picon con quelli di vhannibal (risparmia spazio e ci sono tutti i canali italia+sky) ..con i picon precedenti non bastava lo spazio per compilare.
5)* Aggiunto il pulsante formatta usb nella sezione HDD-USB ( SPERIMENTALE - ma funziona )
6) Aggiornato il cvs al 17-12-2007
7) Invertito i colori, blu e giallo, dei bottoni "stop cam" e "set extra" in "pannello emu" (in caso di cam incartata non si riesce a entrare nella gestione emu, ..parte di continuo stop emu)
8) Svuotato lo script00.sh ...uno se lo puo' personalizzare, e ormai non serviva piu' il contenuto
9) Aggiunto sviluppo immagine per ipbox400(presto online)
10) Aggiunto immagine per DM500PLUS
11) tolto il supporto ipkgpl (plugin) dalle immagini: dm500plus - dm600pvr - dm7020 (ormai usano tutti il blu-panel e i pacchetti .tar.gz)
12) Aggiunto l'eseguibile "awk" (link di busybox) nelle immagini dei 200-250-350-400-500-5620-7000
13) Sistemato ecm_info e netcard_info con i resoconti delle emu con card
14) Modificati timer.cpp ...ora se si usa weekepg, l'epg di base non si crea la propria cache.
15) Modificato patch per ipbox, ora nel timer l'opzione di default e' "recDVR"
16) Nazionalizzato weekepg e gestione backup/firmware




IPBOX200S:
-------------
Usable to flash
* Enigma of: 17.12.2007 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* New driver from sandali
* Auto SET mID

IPBOX250S:
---------
Usable to HDD (CF) or flash
* Enigma of: 17.12.2007 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* Tuxtxt v. 1.99
* New driver from sandali
* Have to SET mID 25

IPBOX350S:
---------
Usable to HDD, USB or flash
* Enigma of: 17.12.2007 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* Tuxtxt v. 1.99
* New driver from sandali
* Have to SET mID 26

IPBOX400S:
---------
Usable to HDD or flash
* Enigma of: 17.12.2007 (patched for native version)
* Linux version 2.6.17 (patched from sandali)
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* U-BOOT 1.2.0 (patched from sandali)
* Tuxtxt v. 1.99
* New driver from sandali
* Have to SET mID 40

DB500:
--------
Usable to flash
* Enigma of: 17.12.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB5620:
--------
Usable to flash
* Enigma of: 17.12.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB7000:
---------
Usable to HDD, USB, CF or flash
* Enigma of: 17.12.2007
* Linux version 2.6.9
* GCC 3.4.4 Original CVS 1.1.0
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB7020:
---------
* Usable to HDD, USB, CF or flash
* Enigma of: 17.12.2007
* OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [460f9823f9764f1a1a9beccd73ba4d7dfaa19804]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"

DB600PVR:
---------
* Usable to HDD or flash
* Enigma of: 17.12.2007
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [460f9823f9764f1a1a9beccd73ba4d7dfaa19804]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm600pvr"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************** ****

DB500PLUS:
---------
* Usable to flash
* Enigma of: 17.12.2007
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [460f9823f9764f1a1a9beccd73ba4d7dfaa19804]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm500plus"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************** ****


ALL DECODER ( same options not present to IPBOX200s - DM500 - DM500+ - DM5620 ):
Buttons:
----------
* BLUE - Blue-Panel
* 2x BLUE - Emu-Panel
* YELLOW - Plugins
* YELLOW > 1 sec. ..start plugin called sifteam (rename any plugin you want use with this option)
* BLUE - YELLOW > Addons
* BLUE - GREEN > Scripts
* RED - WEEKEPG (thanks to MaxZ4)
* GREEN - subservices
*

Features:
----------
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced SWAP file configuration, you can set swap in USB, CF or HDD (16mb or 32 mb)
* Advanced DNS with graphics start/stop/configuration
* Advanced FILES visualizations
* Advanced BACKUP with graphics start/stop/configuration
* Set CROND start at any boot
* Advanced crond system configuration
* Set SAMBA start at any boot (7000 have to install samba-plugin)
* Advanced WEEKEPG options ( ...if you want use standard, set to blue-panel->options->weekepg )
* Automount HDD USB CF
* Advanced HDD ..set sleep and acoustic options
* Advanced SCRIPT options for personal set
* Advanced OpenVpn with graphics start/stop/configuration
* Advanced AMULE with graphics start/stop
* Advanced TORRENT with graphics start/stop/configuration (thanks to MaxZ4)
* Set personal AUTOSTART program
* Color set to RGB from default ( for lcd TV)
* Simple Set directory for picon
* Inserted DM7020 Network Fix

Display Function:
-------------------
From 1.8.5 more of this information is settable from Menu-Advanced..
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Display long date format
* Picon, already inserted to enigma code (thanks to jlmota)
* SkinPreview (thanks to jlmota)
* Skin Lite/Full, when Lite ..if no OSD present, and press OK see Full (thanks to tension for help)
* skin by porto for Dreambox
* skin by porto for Ipbox


EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM
* Set off/on and hours/minutes for autorestart CAM
*

Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons
*


Misc:
------
* Italian, English language
* Many language in download
* Skin default - porto
* Picon for -skyit+italian channel- is already installed
* Several Plugins/Games/Addons installed
* IPBOX250S ...autoset mID
* IPBOX350S ...autoset mID
* IPBOX200S ...autoset mID
* IPBOX200S have UHF in/out
* IPBOX200S ...for free memory (if is necessary):
1) Go to free channel
2) Click to "Free Memory"
...now is possible to start/stop install/remove visualize script ecc..
************************************************** ******


THANKS TO:
--------------
DM500 > frog68
DM500+ >
DM600 > neri73
DM7000 > MaxZ4, adamo49, ngc1927
DM5620 >
DM7020 > ngc1927
IPBOX200S > ngc1927, genge
IPBOX250S > astemio, neri73
IPBOX350S > ngc1927, genge, voodo3
IPBOX400S > blakskettle
All IPBOX > ..special thanks to sandali for its branch of development ..and Blakskettle for any info.
FOR ALL > porto, jlmota, MaxZ4, adga ...and other?

Thanks to all and good fun
************************************************** ******


VARIOUS:
-----------
This image is based, beyond that my "much" code and hard work, to Dream-cvs, parts of old Hydra
source (EMU/ADDONS ...emubroker is this) ...and other?
************************************************** ******



************************************************** ****************
ATTENZIONE:
QUESTO FIRMWARE NON CONTIENE CHIAVI, NE' EMULATORI, NE'
INDIRIZZI PER SCARICARE MATERIALE ILLEGALE DI NESSUN TIPO.
L'AUTORE NON E' RESPONSABILE IN NESSUN MODO DELL'USO CHE
GLI UTENTI NE FARANNO, DI LORO SPONTANEA VOLONTA'.

THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR
URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
AUTHOR IS NOT RESPONSIBLE IN ANY WAY FOR WHAT
THE USERS WILL DO WITH THIS FIRMWARE.
************************************************** ****************
 
Last edited:
B

boxgot

SifTeam-1.8.5.2B3-500plus.nfi

Relativo all'immagine 1.8.5.2
-------------------------------------

CAMBIAMENTI ATTUALI:
--------------------

1) Sistemato openvpn (tolto diverse parti rimaste nei 7020-600pvr-500plus)
2) Sistemato ancora openvpn (ora compare nel pannello dei 500-5620-200)
3) Aggiunto il controllo dei dischi nel 250 (se uno ha sia CF che HDD monta master la CF e slave l'HDD, questo
sistema e' stato riportato come migliore ed e' il piu' usato)
4) Aggiunto le opzioni per DMA e 32bit dei dischi, nel file di avvio.
5) Aggiunto l'opzione "Always 16:9" nelle immagini IPBOX
6) Modificato la variabile che visualizza la frequenza (osd), ora compare subito
7) Sistemato un BUG nella gestione xml ..ora tutti i plugin che usano xml non crashano enigma
(tipo rss, wheather, ecc.. )
Aggiornato il cvs al 01.01.2008
 
Last edited by a moderator:
B

boxgot

SifTeam-1[1].8.8.1-500plus.nfi

SifTeam 1.8.8.1



Quote:
Relativo all'immagine 1.8.8.1
-----------------------------

Coder: ngc1927
--------------
Aiutanti: porto - frog68 - MaxZ4 - jlmota
-----------------------------------------
Betatester:

genge = 350 - 200

astemio = 250 - dm7020

frog68 = dm500

neri73 = dm7000S

voodo3 = 400

theseven = dm500s - dm7020s

black33 = dm600pvr

biondo79 = 250s - DM500s - DM600PVR

imasna = dm600pvr

piefav = dm7020

-----------------------------------------------------------------------------


CAMBIAMENTI:
------------
1) Aggiunto l'opzione per settare il bottone verde come subservice (se premuto + di 1 secondo)
2) Corretto Openvpn (riscritto completamente lo scirpt)
3) Corretto minicron (non salvava la quinta opzione)
4) Aggiunta l'opzione "Sincronizzare la data da online" (In Expert Menu')
5) Aggiunto il link .0 alla libcrypto nel 500plus e nel 600pvr


DB500:
--------
Usable to flash
* Enigma of: 25.02.2008
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB5620:
--------
Usable to flash
* Enigma of: 25.02.2008
* Linux version 2.6.9
* GCC 3.4.4 Original CVS
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB7000:
---------
Usable to HDD, USB, CF or flash
* Enigma of: 25.02.2008
* Linux version 2.6.9
* GCC 3.4.4 Original CVS 1.1.0
* Web Interface: 6.0.2-Expert
* Busybox 1.01
* Tuxtxt v. 1.99

DB7020:
---------
* Usable to HDD, USB, CF or flash
* Enigma of: 25.02.2008
* OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [3da3ba134ac8cb954b8257512cf57c0aa03312ea]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm7020"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"

DB600PVR:
---------
* Usable to HDD or flash
* Enigma of: 25.02.2008
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [3da3ba134ac8cb954b8257512cf57c0aa03312ea]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm600pvr"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************** ****

DB500PLUS:
---------
* Usable to flash
* Enigma of: 25.02.2008
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [3da3ba134ac8cb954b8257512cf57c0aa03312ea]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm500plus"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************** ****


ALL DECODER ( same options not present to IPBOX200s - DM500 - DM500+ - DM5620 ):
Buttons:
----------
* 1 x BLUE = Emu Panel
* 1 x Yellow = Plugins
* 1 x Green = Addons Panel
* 1 x Red = EPG ( settable from Control Pannel )
* BLUE > 1 sec = Control Panel ( new version "visual" )
* Yellow > 1 sec. = Personal Plugin ( settable from Control Pannel )
* Green > 1 sec. = Personal Plugin ( settable from Control Pannel ) or subservice menu' (from 1.8.8.1)

Features:
----------
* Advanced MINICROND system configuration, with more script added (restart cam, restart openvpn ecc..)
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced OPENVPN with graphics start/stop/configuration (have to install package)
* Advanced DROPBEARSSH with graphics start/stop/configuration (have to install package)
* Advanced INADYN-DNS with graphics start/stop/configuration
* Settable PICON directory
* Automount HDD USB CF
* Advanced SCRIPT options for personal set ( name to button is modifiable from Control Panel)
* Formatting USB ( into 500 and 200 not have USB option, have manage remote control and free memory)
* Advanced EPG options (is possible set personal EPG from Control Panel or use standard EPG)
* Advanced Manage of Button Yellow and Green, is possible add one plugin to this buttons
* Simple BACKUP with graphics start/stop/configuration (for save one dir. to extern support)
* Advanced SAMBA with graphics start/stop/configuration (7020 - 600pvr - 500plus have samba installed from default)
* Color set to RGB from default ( for lcd TV)
* Inserted DM7020 Network Fix
* Reiserfs and VFAT supported
* Synchronize date from Internet

Display Function:
-------------------
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Display long date format
* Picon, already inserted to enigma code (thanks to jlmota)
* SkinPreview (thanks to jlmota)
* Skin Lite/Full, when Lite ..if no OSD present, and press OK see Full (thanks to tension for help)
* skin by porto for Dreambox
* skin by porto for Ipbox
* Emu Panel now have image with icon report of decode

EMU:
------
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM

Addons:
---------
* Internet addons download
* Manual addons install
* Remove installed addons

Misc:
------
* Italian, English language
* Many language in download
* Picon for -skyit+italian channel- is already installed
* Several Plugins/Games/Addons installed
* IPBOX200S have UHF in/out
* IPBOX200S ...for free memory (if is necessary):
1) Go to free channel
2) Click to "Free Memory"
...now is possible to start/stop install/remove visualize script ecc..
* For use your personal Addons server, create file:
/var/etc/SifTeam/tmp/url2 (that it contains your link)
after, into server have write your cpanel-dream.xml (for dream decoder)
or cpanel-ipbox.xml (for ipbox decoder), that contains your packages
(for simple system, download cpanel*.xml from sifteam URL)
************************************************** **********************


THANKS TO:
--------------
See About from Control Panel for all help into this work.
All IPBOX > ..special thanks to sandali for its branch of development ..and Blakskettle for any info.
FOR ALL > porto, jlmota, MaxZ4, adga ...and other?

Thanks to all and good fun
************************************************** ******


VARIOUS:
-----------
This image is based, beyond that my "much" code and hard work, to Dream-cvs, parts of old Hydra
source (EMU/ADDONS ...emubroker is this) ...and other?
************************************************** ******



************************************************** ****************
ATTENZIONE:
QUESTO FIRMWARE NON CONTIENE CHIAVI, NE' EMULATORI, NE'
INDIRIZZI PER SCARICARE MATERIALE ILLEGALE DI NESSUN TIPO.
L'AUTORE NON E' RESPONSABILE IN NESSUN MODO DELL'USO CHE
GLI UTENTI NE FARANNO, DI LORO SPONTANEA VOLONTA'.

THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR
URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
AUTHOR IS NOT RESPONSIBLE IN ANY WAY FOR WHAT
THE USERS WILL DO WITH THIS FIRMWARE.
************************************************** ****************
 
Last edited by a moderator:
B

boxgot

SifTeam v1.9.0 for DM500plus

DB500PLUS:
---------
* Usable to flash
* Enigma of: 08.04.2008
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [3f1d26a6a9b1cc3165defeebb698bfd5650df752]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm500plus"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
 
Last edited by a moderator:
B

boxgot

SifTeam v1.9.1 for DM500plus

SifTeam v1.9.1 for DM500plus

DB500PLUS:
---------
* Usable to flash
* Enigma of: 08.05.2008
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [3f1d26a6a9b1cc3165defeebb698bfd5650df752]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm500plus"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
 
Last edited by a moderator:

k@lkov

Super VIP
Messages
10,003
SifTeam 1.9.2 dm500 Plus

SifTeam 1.9.2 dm500 Plus
Code:
* Usable to flash
* Enigma of: 25.07.2008
OE Build Configuration:
BB_VERSION     = "1.6.2"
OE_REVISION    = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [f614357ba8e0764943610cfaccb2ca995a6597da]"
TARGET_ARCH    = "powerpc"
TARGET_OS      = "linux"
MACHINE        = "dm500plus"
DISTRO         = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU     = "soft"
Thanks SifTeam
 

k@lkov

Super VIP
Messages
10,003
SifTeam 1.9.2B DM500plus

SifTeam 1.9.2B DM500plus
Code:
[B]Buttons:[/B]
* 1 x BLUE = Emu Panel
* 1 x Yellow = Plugins
* 1 x Green = Addons Panel
* 1 x Red = EPG ( settable from Control Pannel )
* BLUE > 1 sec = Control Panel ( new version "visual" )
* Yellow > 1 sec. = Personal Plugin ( settable from Control Pannel )
* Green > 1 sec. = Personal Plugin ( settable from Control Pannel )

[B]Features:[/B]
* Advanced MINICROND system configuration, with more script added (restart cam, restart openvpn ecc..)
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced HDD with graphics configuration
* Advanced SWAP with graphics start/stop/configuration
* Advanced OPENVPN with graphics start/stop/configuration (have to install online package)
* Advanced DROPBEARSSH with graphics start/stop/configuration (have to install online package)
* Advanced INADYN-DNS with graphics start/stop/configuration
* Advanced NFS with graphics start/stop/configuration (have to install online package)
* Settable PICON directory
* Automount HDD USB CF
* Advanced SCRIPT options for personal set ( name to button is modifiable from Control Panel)
* Formatting USB ( into 500 and 200 not have USB option, have manage remote control and free memory)
* Advanced EPG options (is possible set personal EPG from Control Panel or use standard EPG)
* Advanced Manage of Button Yellow and Green, is possible add one plugin to this buttons
* Simple BACKUP with graphics start/stop/configuration (for save one dir. to extern support)
* Advanced SAMBA with graphics start/stop/configuration (7020 - 600pvr - 500plus have samba installed from default)
* Color set to RGB from default ( for lcd TV)
* Inserted DM7020 Network Fix
* Reiserfs and VFAT supported
* Synchronize date from Internet
* WebIf information (ecm.info with reload option)
* New Button for second url (for download personel addons)
* Autostandby if decoder turn off in bad mode (crash power ecc..)

[B]Display Function:[/B]
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Picon, already inserted to enigma code (thanks to jlmota)
* SkinPreview (thanks to jlmota)
* Skin Lite/Full, when Lite ..if no OSD present, and press OK see Full (thanks to tension for help)
* Emu Panel now have image with icon report of decode
* Fulltime
* Analogic Clock
* Move OSD (thanks to tension9000)
* Always 16:9 settable in all decoder
* Time visible in screen
* Name channel visible in screen

[B]EMU:[/B]
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM

[B]Addons:[/B]
* Internet addons download
* Manual addons install
* Remove installed addons

[B]Misc:[/B]
* Italian, English language
* Many language in download
* Picon for -skyit+italian channel- is already installed
* Several Plugins/Games/Addons installed

[B]DB500PLUS:[/B]
* Usable to flash
* Enigma of: 06.08.2008
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [f614357ba8e0764943610cfaccb2ca995a6597da]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm500plus"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
 

k@lkov

Super VIP
Messages
10,003
SifTeam 1.9.2C DM500 plus

Code:
* Usable to flash
* Enigma of: 22.06.2008
OE Build Configuration:
BB_VERSION     = "1.6.2"
OE_REVISION    = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [f614357ba8e0764943610cfaccb2ca995a6597da]"
TARGET_ARCH    = "powerpc"
TARGET_OS      = "linux"
MACHINE        = "dm500plus"
DISTRO         = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU     = "soft"
Code:
[B]CAMBIAMENTI:[/B]
1) *Cambiato il CVS alla versione 22.06.2008
2) E' possibile impostare la dimensione dei file registrati (.TS) anche nel 500 - 5620
3) Spostato il file streamts in /var/bin (in modo che si possa sostituire con uno piu' performante)
   (tutti gli ipbox, il qbox, i dream 500 e 5620)
4) Tolte le password (va' impostata da soli con il comando "passwd")
5) Negli ipbox, e il qbox, e' stato linkato in /var/lib/modules/ il modulo reiserfs.ko
   (installabile da online) ..causa mancanza spazio dopo l'aggiornamento di enigma dal 21.06.2008
6) Si puo' spostare lo skin (ora e' OK, ..grazie ai consigli dell'amico Tension9000)
7) Si puo' visualizzare un'orologio nello schermo con ore,minuti,secondi
8) **Aggiunto il supporto al Qbox-one della Duolabs
9) Negli ipbox reinserito il supporto al timeshift (per test)
10) Possibilita' di attivare l'opzione "Always 16:9" in tutti i decoder
11) Si puo' visualizzare il nome del canale nello schermo
12) Il mID negli ipbox viene impostato nel file /var/etc/launch (in zona riscrivibile)
13) Negli ipbox si puo' cambiare il sistema di montaggio dischi ( /var/etc/Mount.conf )
14) Si puo' cambiare/personalizzare l'ultimo logo (bild3)
15) Aumentati i pixel che si possono usare per spostare l'OSD (60)

[B]NOTE:[/B]
Per la versione ipbox-200@64mb si deve:
1) Installare l'immagine del 200 normale
2) Installare il file "serial_uboot_64.img"
..entrambi con Flashtools o Flasher


[B]Programmi:[/B]
Per avviare programmi personali, valido per tutte le immagini SifTeam: Aggiungere il comando voluto in /var/etc/rcS.d/S99user_start.sh in fondo al file (ci sono gia' presenti diversi esempi pronti all'uso, basta decommentarli rimuovendo il simbolo #)

[B]Tips:[/B]
Per entrare nel Pannello di Controllo se ci si trova nel Pannello Emu basta premere il bottone giallo, funzione aggiunta per l'uso nella WebIf.
Per aprire il menu' Script mentre ci si trova nel Pannello di Controllo basta premere lo 0 (zero).


[B]Per modificare la posizione nello schermo, della visualizzazione orario e nome canale:[/B]
Il valore verticale di default e' 80 per l'orario ..e 110 per il nome canale
Il valore orizzontale, entrambi 0
Si puo' modificare il valore verticale, da telnet:
echo 50 > /var/etc/SifTeam/conf/altOraOSD
echo 80 > /var/etc/SifTeam/conf/altCanaleOSD
Si puo' modificare il valore orizzontale, da telnet:
echo 10 > /var/etc/SifTeam/conf/oriOraOSD
echo 10 > /var/etc/SifTeam/conf/oriCanaleOSD
..in pratica legge quei file (se presenti) e usa il loro valore al posto dei default.

[B]Errori:[/B]
In caso si presenti l'errore "..curl_global_init.." con qualche plugin, dopo l'installazione del medesimo basta riavviare enigma o il decoder. (deve rileggere la nuova libreria installata dal plugin)

* Il CVS e' stato cambiato "indietro" per i problemi di compatibilita' riscontrata con l'ultimo
  ( I cambiamenti dal 22.06.2008 al 06.08.2008 sono legati al TimeShift, e tenuto conto che
  i modelli ipbox neppure lo possono usare, ho ritenuto giusto usare il 22.06.2008 )

** Il Qbox-one non ha ancora tutte le funzioni degli altri modelli, ad esempio il firewall per
   ora non funziona (altrimenti il kernel non e' compatibile con il modulo wifi della duolabs)
   ..cosi' come alcuni plugin non vanno ...diciamo work in progress ...ma e' perfettamente
   utilizzabile con le funzioni base. Forse la cosa che manca di piu' e' la funzione del tasto
   premuto per >1sec. (per piu' di un secondo), per entrare nel pannello di controllo si deve 
   passare da: tasto blu -> tasto giallo
 

k@lkov

Super VIP
Messages
10,003
SifTeam 1.9.3 DM500plus

Code:
[B]DB500PLUS:[/B]
* Usable to flash
* Enigma of: 01.11.2008
OE Build Configuration:
BB_VERSION     = "1.6.2"
OE_REVISION    = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [8384ee468ef9c285a8c9b35ef333e53be78b6445]"
TARGET_ARCH    = "powerpc"
TARGET_OS      = "linux"
MACHINE        = "dm500plus"
DISTRO         = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU     = "soft"

ALL DECODER ( same options not present to Qbox-one - 
IPBOX200s - DM500 - DM500+ - DM5620 ):

[B]Buttons:[/B]
* 1 x BLUE        = Emu Panel
* 1 x Yellow      = Plugins
* 1 x Green       = Addons Panel
* 1 x Red         = EPG ( settable from Control Pannel )
* BLUE   > 1 sec  = Control Panel    ( new version "visual" )
* Yellow > 1 sec. = Personal Plugin  ( settable from Control Pannel )
* Green  > 1 sec. = Personal Plugin  ( settable from Control Pannel )

[B]Features:[/B]
* Advanced MINICROND system configuration, with more script 
  added (restart cam, restart openvpn ecc..)
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced HDD with graphics configuration
* Advanced SWAP with graphics start/stop/configuration
* Advanced OPENVPN with graphics start/stop/configuration 
  (have to install online package)
* Advanced DROPBEARSSH with graphics start/stop/configuration
  (have to install online package)
* Advanced INADYN-DNS with graphics start/stop/configuration
* Advanced NFS with graphics start/stop/configuration (have to 
  install online package)
* Settable PICON directory
* Automount HDD USB CF
* Advanced SCRIPT options for personal set ( name to button
  is modifiable from Control Panel)
* Formatting USB ( into 500 and 200 not have USB option, have 
  manage remote control and free memory)
* Advanced EPG options (is possible set personal EPG from Control 
  Panel or use standard EPG)
* Advanced Manage of Button Yellow and Green, is possible add 
  one plugin to this buttons
* Simple BACKUP with graphics start/stop/configuration 
  (for save one dir. to extern support)
* Advanced SAMBA with graphics start/stop/configuration 
 (7020 - 600pvr - 500plus have samba installed from default)
* Color set to RGB from default ( for lcd TV)
* Inserted DM7020 Network Fix
* Reiserfs and VFAT supported
* Synchronize date from Internet
* WebIf information (ecm.info with reload option)
* New Button for second url (for download personel addons)
* Autostandby if decoder turn off in bad mode (crash power ecc..)

[B]Display Function:[/B]
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Picon, already inserted to enigma code  (thanks to jlmota)
* SkinPreview  (thanks to jlmota)
* Skin Lite/Full, when Lite ..if no OSD present, and press OK 
  see Full (thanks to tension for help)
* Emu Panel now have image with icon report of decode
* Fulltime
* Analogic Clock
* Move OSD (thanks to tension9000)
* Always 16:9 settable in all decoder
* Time visible in screen
* Name channel visible in screen

[B]EMU:[/B]
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM

[B]Addons:[/B]
* Internet addons download
* Manual addons install
* Remove installed addons

[B]Misc:[/B]
* Italian, English language
* Many language in download
* Picon for -skyit+italian channel- is already installed
* Several Plugins/Games/Addons installed
* IPBOX200S have UHF in/out
* IPBOX200S ...for free memory (if is necessary):
 1) Go to free channel
 2) Click to "Free Memory"
 ...now is possible to start/stop install/remove visualize script ecc..
* For use your personal Addons server, create file:
  /var/etc/SifTeam/tmp/url2 (that it contains your link)
  after, into server have write your cpanel-dream.xml (for dream decoder)
  or cpanel-ipbox.xml (for ipbox decoder), that contains your packages
  (for simple system, download cpanel*.xml from sifteam URL)

[B]THANKS TO[/B]:
See Yellow from Control Panel for other help into this work.
All IPBOX > ..special thanks to sandali for its branch of development ..and Blakskettle for any info.
FOR ALL   > porto, MaxZ4, tension9000, jlmota ..and other?
Thanks to all and good fun :)

[B]VARIOUS:[/B]
This image is based, beyond that my "much" code and hard work, to Dream-cvs, parts of old Hydra 
source (EMU/ADDONS ...emubroker is this) ...and other?

THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR 
URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
AUTHOR IS NOT RESPONSIBLE IN ANY WAY FOR WHAT
THE USERS WILL DO WITH THIS FIRMWARE.
 

k@lkov

Super VIP
Messages
10,003
SifTeam 1.9.3B 500plus

Code:
[B]DB500PLUS:[/B]
* Usable to flash
* Enigma of: 19.11.2008
OE Build Configuration:
BB_VERSION     = "1.6.2"
OE_REVISION    = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [8384ee468ef9c285a8c9b35ef333e53be78b6445]"
TARGET_ARCH    = "powerpc"
TARGET_OS      = "linux"
MACHINE        = "dm500plus"
DISTRO         = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU     = "soft"

ALL DECODER ( same options not present to 
Qbox-one - IPBOX200s - DM500 - DM500+ - DM5620 ):

[B]Buttons[/B]:
* 1 x BLUE        = Emu Panel
* 1 x Yellow      = Plugins
* 1 x Green       = Addons Panel
* 1 x Red         = EPG ( settable from Control Pannel )
* BLUE   > 1 sec  = Control Panel    ( new version "visual" )
* Yellow > 1 sec. = Personal Plugin  ( settable from Control Pannel )
* Green  > 1 sec. = Personal Plugin  ( settable from Control Pannel )

[B]Features:[/B]
* Advanced MINICROND system configuration, with more script added 
  (restart cam, restart openvpn ecc..)
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced HDD with graphics configuration
* Advanced SWAP with graphics start/stop/configuration
* Advanced OPENVPN with graphics start/stop/configuration
  (have to install online package)
* Advanced DROPBEARSSH with graphics start/stop/configuration 
  (have to install online package)
* Advanced INADYN-DNS with graphics start/stop/configuration
* Advanced NFS with graphics start/stop/configuration (have to
   install online package)
* Settable PICON directory
* Automount HDD USB CF
* Advanced SCRIPT options for personal set ( name to button
  is modifiable from Control Panel)
* Formatting USB ( into 500 and 200 not have USB option, 
  have manage remote control and free memory)
* Advanced EPG options (is possible set personal EPG from 
  Control Panel or use standard EPG)
* Advanced Manage of Button Yellow and Green, is possible 
  add one plugin to this buttons
* Simple BACKUP with graphics start/stop/configuration (for 
  save one dir. to extern support)
* Advanced SAMBA with graphics start/stop/configuration
  (7020 - 600pvr - 500plus have samba installed from default)
* Color set to RGB from default ( for lcd TV)
* Inserted DM7020 Network Fix
* Reiserfs and VFAT supported
* Synchronize date from Internet
* WebIf information (ecm.info with reload option)
* New Button for second url (for download personel addons)
* Autostandby if decoder turn off in bad mode (crash power ecc..)

[B]Display Function:[/B]
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Picon, already inserted to enigma code  (thanks to jlmota)
* SkinPreview  (thanks to jlmota)
* Skin Lite/Full, when Lite ..if no OSD present, and press OK see Full 
  (thanks to tension for help)
* Emu Panel now have image with icon report of decode
* Fulltime
* Analogic Clock
* Move OSD (thanks to tension9000)
* Always 16:9 settable in all decoder
* Time visible in screen
* Name channel visible in screen

[B]EMU:[/B]
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM

[B]Addons:[/B]
* Internet addons download
* Manual addons install
* Remove installed addons

[B]Misc:[/B]
* Italian, English language
* Many language in download
* Picon for -skyit+italian channel- is already installed
* Several Plugins/Games/Addons installed
* IPBOX200S have UHF in/out
* IPBOX200S ...for free memory (if is necessary):
 1) Go to free channel
 2) Click to "Free Memory"
 ...now is possible to start/stop install/remove visualize script ecc..
* For use your personal Addons server, create file:
  /var/etc/SifTeam/tmp/url2 (that it contains your link)
  after, into server have write your cpanel-dream.xml (for dream decoder)
  or cpanel-ipbox.xml (for ipbox decoder), that contains your packages
  (for simple system, download cpanel*.xml from sifteam URL)

[B]THANKS TO:[/B]
See Yellow from Control Panel for other help into this work.
All IPBOX > ..special thanks to sandali for its branch of development ..and Blakskettle for any info.
FOR ALL   > porto, MaxZ4, tension9000, jlmota ..and other?

[B]VARIOUS:[/B]
This image is based, beyond that my "much" code and hard work, to Dream-cvs, parts of old Hydra 
source (EMU/ADDONS ...emubroker is this) ...and other?

THIS FIRMWARE DOES NOT INCLUDE KEYS, NOR EMULATORS, NOR 
URLS FOR DOWNLOADING ILLEGAL STUFFS OF ANY TYPE.
AUTHOR IS NOT RESPONSIBLE IN ANY WAY FOR WHAT
THE USERS WILL DO WITH THIS FIRMWARE.
 

sasulininow

Registered
Messages
6
The sif team has actived a 2th online panel for addons download right procedure and files from here :

regards

SifTeam
 
Last edited by a moderator:

k@lkov

Super VIP
Messages
10,003
SifTeam 1.9.3C 500plus

Code:
[B]DB500PLUS:[/B]
* Usable to flash
* Enigma of: 18.12.2008
OE Build Configuration:
BB_VERSION     = "1.6.2"
OE_REVISION    = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [8384ee468ef9c285a8c9b35ef333e53be78b6445]"
TARGET_ARCH    = "powerpc"
TARGET_OS      = "linux"
MACHINE        = "dm500plus"
DISTRO         = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU     = "soft"

ALL DECODER ( same options not present to Qbox-one 
- IPBOX200s - DM500 - DM500+ - DM5620 ):
[B]Buttons:[/B]
* 1 x BLUE        = Emu Panel
* 1 x Yellow      = Plugins
* 1 x Green       = Addons Panel
* 1 x Red         = EPG ( settable from Control Pannel )
* BLUE   > 1 sec  = Control Panel    ( new version "visual" )
* Yellow > 1 sec. = Personal Plugin  ( settable from Control Pannel )
* Green  > 1 sec. = Personal Plugin  ( settable from Control Pannel )

[B]Features:[/B]
* Advanced MINICROND system configuration, with more script
  added (restart cam, restart openvpn ecc..)
* Advanced FIREWALL with graphics start/stop/configuration
* Advanced HDD with graphics configuration
* Advanced SWAP with graphics start/stop/configuration
* Advanced OPENVPN with graphics start/stop/configuration
  (have to install online package)
* Advanced DROPBEARSSH with graphics start/stop/configuration 
  (have to install online package)
* Advanced INADYN-DNS with graphics start/stop/configuration
* Advanced NFS with graphics start/stop/configuration (have to install 
  online package)
* Settable PICON directory
* Automount HDD USB CF
* Advanced SCRIPT options for personal set ( name to button is modifiable 
  from Control Panel)
* Formatting USB ( into 500 and 200 not have USB option, have manage 
  remote control and free memory)
* Advanced EPG options (is possible set personal EPG from Control 
  Panel or use standard EPG)
* Advanced Manage of Button Yellow and Green, is possible add one 
  plugin to this buttons
* Simple BACKUP with graphics start/stop/configuration (for save one dir. 
  to extern support)
* Advanced SAMBA with graphics start/stop/configuration (7020 - 600pvr 
  - 500plus have samba installed from default)
* Color set to RGB from default ( for lcd TV)
* Inserted DM7020 Network Fix
* Reiserfs and VFAT supported
* Synchronize date from Internet
* WebIf information (ecm.info with reload option)
* New Button for second url (for download personel addons)
* Autostandby if decoder turn off in bad mode (crash power ecc..)

[B]Display Function:[/B]
* Set zap without OSD (if press OK return OSD)
* Set OSD always on when OK is pressed (required from nokia9k8)
* Display Snr, Agc, Ber
* Display video information
* Display frequency, polarization, symbol rate
* Display emu in use
* Display service providers name
* Display CaID, ProvID, PID (you can hide from options)
* Display Decoding Source (you can hide from options)
* Picon, already inserted to enigma code  (thanks to jlmota)
* SkinPreview  (thanks to jlmota)
* Skin Lite/Full, when Lite ..if no OSD present, and press OK see Full 
  (thanks to tension for help)
* Emu Panel now have image with icon report of decode
* Fulltime
* Analogic Clock
* Move OSD (thanks to tension9000)
* Always 16:9 settable in all decoder
* Time visible in screen
* Name channel visible in screen

[B]EMU:[/B]
* Set Default CAM
* Set channel CAM
* Set provider CAM
* Stop active CAM

[B]Addons:[/B]
* Internet addons download
* Manual addons install
* Remove installed addons

[B]Misc:[/B]
* Italian, English language
* Many language in download
* Picon for -skyit+italian channel- is already installed
* Several Plugins/Games/Addons installed
* IPBOX200S have UHF in/out
* IPBOX200S ...for free memory (if is necessary):
 1) Go to free channel
 2) Click to "Free Memory"
 ...now is possible to start/stop install/remove visualize script ecc..
* For use your personal Addons server, create file:
  /var/etc/SifTeam/tmp/url2 (that it contains your link)
  after, into server have write your cpanel-dream.xml (for dream decoder)
  or cpanel-ipbox.xml (for ipbox decoder), that contains your packages
  (for simple system, download cpanel*.xml from sifteam URL)

[B]THANKS TO:[/B]
See Yellow from Control Panel for other help into this work.
All IPBOX > ..special thanks to sandali for its branch of development ..
and Blakskettle for any info.
FOR ALL   > porto, MaxZ4, tension9000, jlmota ..and other?

Thanks to all and good fun :)

[B]VARIOUS:[/B]
This image is based, beyond that my "much" code and hard work, 
to Dream-cvs, parts of old Hydra 
source (EMU/ADDONS ...emubroker is this) ...and other?
 

marce

VIP
Messages
7,115
SifTeam-1.9.3E-500plus

SifTeam-1.9.3E-500plus


Relativo all'immagine 1.9.3E
-----------------------------

Coder: ngc1927
-----------------------------------------------------------------------------
Betatester and friends:
genge = Ipbox200 - Qbox
frog68 = Dm500
neri73 = Dm7000S - Qbox
voodo3 = Qbox
theseven = Dm500s - Dm7020s
black33 = Dm600pvr
biondo79 = Ipbox250s - DM500s - DM600PVR
piefav = Dm7020
Gerryg = Ipbox350
Renderman = Bootlogo
Killer = Qbox
Getdownup = IPbox350
Costa46 = Qbox - Ipbox250 -English/Changelog - Addon panel
badwolf = Ipbox350 - Addon panel
morpheus883 = Dm500s
porto = Skin
rrotan = skin betatester
nikolasi = skin

CHANGES:
------------
1) Changed the CVS version 5.04.2009
2) Submitted by default Apache Little in all images
3) restored "streamts"
4) Removed avahi / zeroconf IP problem for 169th (some models)
5) Removed dall'orologio the seconds on the screen, to be re-telnet to:
echo 1> / var / etc / SifTeam / conf / SecOraOSD
 

marce

VIP
Messages
7,115
SifTeam-1.9.4C-500plus


Code:
If anyone wants to pass the time (during holidays) to play with your receiver, can 'prove the image 1.9.4C, is issued as a Christmas

not tested
 

elgeneral

Registered
Messages
7,811
SifTeam 1.9.4C not tested

09-01-2010


DB500PLUS:
---------
* Usable to flash
* Enigma of: 07.01.2010
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [8384ee468ef9c285a8c9b35ef333e53be78b6445]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm500plus"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
 

juli13

Staff member
Administrator
Messages
10,194
SifTeam-1.9.4C-500plus 19.01.2010

1) Changed the CVS version 19.01.2010
2) Change the file satellites.xml base (for problems with the satellite in motorized 28.2E)

DB500PLUS:
---------
* Usable to flash
* Enigma of: 19.01.2010
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [8384ee468ef9c285a8c9b35ef333e53be78b6445]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm500plus"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"
************************************************************************
 

tani1

Staff member
Super Moderator
Messages
17,767
SifTeam-1.9.4C-500plus
25/01/2010:
-----------
Removed executable "wdog" models 600pvr and 500plus ... otherwise creates system slowdown
A big thanks to users of the forum, and especially the User "zoltan"
 

tani1

Staff member
Super Moderator
Messages
17,767
SifTeam 1.9.4C - 04.06.2010

DB500PLUS:
---------
* Usable to flash
* Enigma of: 04.06.2010
OE Build Configuration:
BB_VERSION = "1.6.2"
OE_REVISION = "format_version "1"
new_manifest [0000000000000000000000000000000000000004]
old_revision [8384ee468ef9c285a8c9b35ef333e53be78b6445]"
TARGET_ARCH = "powerpc"
TARGET_OS = "linux"
MACHINE = "dm500plus"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.4.0"
TARGET_FPU = "soft"

Changelog - 04\06\2010
-----------
Updated to cvs 04.06.2010
Modified sources conundrum for compatibility 'with oscam (see the OSD for the correct values etc. ..)
 

juli13

Staff member
Administrator
Messages
10,194
SifTeam-1.9.4C - 10/08/2010

DM:500+
---------
Update (10-08-2010
Updated cvs Enigma (10-08-2010)
Possibility to Set subtitle added transparency speedup satellites overview
Updated enigma code to correctly display the information in the OSD.
 

tani1

Staff member
Super Moderator
Messages
17,767
SifTeam-1.9.4C - 09/10/2010

DM:500+
---------
1) Updated cvs Enigma 09-10-2010
- Use bouqup/bouqdown buttons to display EPG of prev/next service when in EPG overview.
- show marker in EPG overview when an EPG entry is overlapping with existing timer.
 
Top