Oscam-emu now supports powervu without streamrelay (on dreambox only...)

eh.. i just refleshed my duo2.. and i will put multi boot so i can use scam-emu with openATV

OSCAM EMU STREAMREALY

WHOSE TEST RASPBERYY PI 3?

arkanoid9 said:

Vu+ duo2 with BH last image, the box remain blocked after changing files and rebooting... i was obliged to re-flash my duo2..

Click to expand...

use VU+ Control Centre to update drivers... but powervu not working OBH (not tried BH) without stream relay...

Ferret said:

Better to wait for image updates a few images fail with these drivers VIX,Openblackhole and Blackhole so far.

Always back up you image and have it on usb drive before trying upgrades like this.

Click to expand...

yes, agree...

Ferret said:

Running OpenPLI at the moment with no issues. Oscam.emu can be run on openPLI.

Click to expand...

BH in flash and openPLI on USB with multi boot is a nice idea? what do you think about ?

ok! this evening i will flash my duo2 with openpli or openatv despite my favorite image is BH..

What is right config?

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
extended_cw_api = 2
enabled = 1
pmt_mode = 6
au = 1
user = user
read_sdt = 1
write_sdt_prov = 1

info

On compatible Dreambox STBs:

1) Disable the Stream Relay (on by default):
Webif -> Config -> Stream Relay -> Mode
0 - disabled

or in oscam.conf:

[streamrelay]
stream_relay_enabled = 0

2) Select the correct DVB-Api extended CW API:
Webif -> Config -> DVB-Api -> API for extended CWs
1 - OE 2.2
2 - OE 2.0

or in oscam.conf:

[dvbapi]
extended_cw_api = 2

Click to expand...

what about new drivers for vu+ uno?

Ferret said:

Using this

[dvbapi]

Click to expand...

Vu+ Duo2 tested with OpenPli 6 and OBH,working fine PowerVu

oscam.conf

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox

Click to expand...

oscam.user

[account]
user = dvbapiau
au = 1
group = 1,2,3,4,5,6,7,8,9

Click to expand...

oscam.server

[reader]
label = constkeys
protocol = constcw
device = /etc/tuxbox/config/oscam-emu/constant.cw
key = 0102030405060708091011121314
reconnecttimeout = 0
caid = 06AD
group = 1

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1FFF,0E00,1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group = 1
emmcache = 1,1,2,1
#emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000000

Click to expand...

for AFN 9°E 11804 Ver

in oscam.server open new emu reader

[reader]
label = AFN
description = AFN-EMU
protocol = emu
device = Emulator
caid = 0E00
detect = cd
group = 1
emmcache = 1,5,31,1
emu_auproviders = 0E00:000000
auprovid = 000E00
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
services = afn

Click to expand...

add to oscam.services

[afn]
caid = 0E00
provid = 000000
srvid = 0066,0067,0068,0069,006A,006B,006C,006D

Click to expand...

using this SoftCam
www.sat-universe.com/showthread.php?goto=newpost&t=200363

Ferret said:

Check your softcam mate make sure keys are current.

Click to expand...

How often do they change keys nowadays?
I remember some months ago they changed keys every day, didn't they? So I lost interest.

I tried with 2 receiver,gigablue quad+ & evo enfinity X2+,
evo 1300mhz proc,mips 2core, gigablue 1330 mhz 2core,both openatv 6.1.without success!!


Unix starttime: 1514448692
Starttime: 28.12.2017 10:11:32
Version: oscam-1.20-unstable_svn-r11397
Compiler: mipsel-unknown-linux-gnu
Box type: gigablue (generic)
PID: 11887
TempDir: /tmp/.oscam
ConfigDir: /usr/keys/oscam_atv_emu/
WebifPort: 83

[global]
logfile = /dev/tty
nice = -1

[cache]
cwcycle_onbad = 0

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0# and 6
user = dvbapiau
extended_cw_api = 1 and 2 #1 block gigablue
boxtype = dreambox

[account]
user = dvbapiau
au = 1
group = 1,2,3,4,5,6,7

black screen!
2017/12/28 10:30:54 55AB3A98 c (ecm) dvbapiau (0E00@000000/0000/0C80/400E3F1D25C95500E7A54D6E09A1E01E2): found (6 ms) by emulator (P/3/3/3)
2017/12/28 10:30:55 55AB3A98 c (dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
2017/12/28 10:30:55 55AB3A98 c (-) -- Skipped 15 duplicated log lines --
2017/12/28 10:30:55 55AB3A98 c (ecm) dvbapiau (0E00@000000/0000/0C80/40:4CBDC9CBD5B2475EAFAD47FA2D215A08): found (21 ms) by emulator (P/3/3/3)
2017/12/28 10:30:56 55AB3A98 c (dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
2017/12/28 10:30:56 55AB3A98 c (-) -- Skipped 15 duplicated log lines --
2017/12/28 10:30:56 55AB3A98 c (ecm) dvbapiau (0E00@000000/0000/0C80/40:1760E8D24AFE1D28BDA8A5F4AB8F1079): found (5 ms) by emulator (P/3/3/3)
2017/12/28 10:30:57 55AB3A98 c (dvbapi) ERROR: ioctl(CA_SET_DESCR): Invalid argument
2017/12/28 10:30:57 55AB3A98 c (-) -- Skipped 15 duplicated log lines --
2017/12/28 10:30:57 55AB3A98 c (ecm) dvbapiau (0E00@000000/0000/0C80/40:670EABE29C819A4BD090745A679EF50C): found (23 ms) by emulator (P/3/3/3)

gogix said:

I tried with 2 receiver,gigablue quad+ & evo enfinity X2+,
evo 1300mhz proc,mips 2core, gigablue 1330 mhz 2core,both openatv 6.1.without success!!

Click to expand...

check config posted few posts ago. also remove additional numbers from extended_cw_api and pmt_mode (have only one)

i have only one,i try,0 and 6!

pmt_mode = 0
pmt_mode = 6

extended_cw_api = 1
extended_cw_api = 2

with extended_cw_api = 1 work only 5sec in gigablue.

Change your device image