EMU Firmware C-Tech HD (5000/5000C)
- Thread starter REDHOU
- Start date
Emu Firmware c-tech HD 5000/5000c
S*k*Y*n*D*s***Italy smartcard***f_i_x_e_d ( but not tested )
HD+*N3**smartcard support added ( but not complete, after a while descrambling stopped, fixed in the next days !! )
Tivu*sat*N3*smartcard support added( but not tested )
Media*set*N3*smartcard support added( but not tested )
+++Yabbervox+++
S*k*Y*n*D*s***Italy smartcard***f_i_x_e_d ( but not tested )
HD+*N3**smartcard support added ( but not complete, after a while descrambling stopped, fixed in the next days !! )
Tivu*sat*N3*smartcard support added( but not tested )
Media*set*N3*smartcard support added( but not tested )
+++Yabbervox+++
Last edited:
- Messages
- 17,767
EMU Firmware C-Tech HD for CTECH5000CPlus 214p
S*k*Y*n*D*s***Italy smartcard***f_i_x_e_d ( but not tested )
HD+*N3**smartcard support added ( but not complete, after a while descrambling stopped, fixed in the next days !! )
Tivu*sat*N3*smartcard support added( but not tested )
Media*set*N3*smartcard support added( but not tested )
+++Yabbervox+++
S*k*Y*n*D*s***Italy smartcard***f_i_x_e_d ( but not tested )
HD+*N3**smartcard support added ( but not complete, after a while descrambling stopped, fixed in the next days !! )
Tivu*sat*N3*smartcard support added( but not tested )
Media*set*N3*smartcard support added( but not tested )
+++Yabbervox+++
bozomustafa_68
Registered
- Messages
- 16,935
Emu Firmware c-tech HD 5000c
TiVu*sat***smartcard***updating+activation added > note: not tested
T*N*T Sat SD/HD smartcard (france) support (Camcrypt)added > note: not tested
+++Yabbervox+++
TiVu*sat***smartcard***updating+activation added > note: not tested
T*N*T Sat SD/HD smartcard (france) support (Camcrypt)added > note: not tested
+++Yabbervox+++
Last edited:
bozomustafa_68
Registered
- Messages
- 16,935
EMU Firmware for C-Tech HD 5000CPlus 220p
TiVu*sat***smartcard***updating+activation fixed > note: not tested
T*N*T Sat SD/HD smartcard (france) support (Camcrypt)added > note: not tested
CS server parameter file upload/download;
Uploading / to store : In hidden menu 8281 > Press [GROUP] key on “Server List” menu.
Downloading: Go to “Main menu” > “Storage” > “Data Transfer”. Press [OK] key on the filename in the file list.
Server parameter file is a text file. You can edit it with any of text editor like windows “notepad.exe”.
Look pdf document !!
c c c a m fixed. Note: the c c c a m server displayed 2.0.11 ! But it is a patched 2.0.11 version !!
+++Yabbervox+++
TiVu*sat***smartcard***updating+activation fixed > note: not tested
T*N*T Sat SD/HD smartcard (france) support (Camcrypt)added > note: not tested
CS server parameter file upload/download;
Uploading / to store : In hidden menu 8281 > Press [GROUP] key on “Server List” menu.
Downloading: Go to “Main menu” > “Storage” > “Data Transfer”. Press [OK] key on the filename in the file list.
Server parameter file is a text file. You can edit it with any of text editor like windows “notepad.exe”.
Look pdf document !!
c c c a m fixed. Note: the c c c a m server displayed 2.0.11 ! But it is a patched 2.0.11 version !!
+++Yabbervox+++
Last edited:
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 225p for Clarke Tech 5000 HD Combo Plus
- Amendments to the mode of the engine to pop-up messages (dish moving to xxx)
- CanalDigitaal AU<- Holland
- Fix smartcard reading
Nor has the Italian language in the menu
FW is not the usual team, so do not say "official"
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
F16 New Firmware 225p for Clarke Tech 5000 HD Combo Plus
- Amendments to the mode of the engine to pop-up messages (dish moving to xxx)
- CanalDigitaal AU<- Holland
- Fix smartcard reading
Nor has the Italian language in the menu
FW is not the usual team, so do not say "official"
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
Last edited:
bozomustafa_68
Registered
- Messages
- 16,935
Emu Firmware c-tech HD 5000/5000c
- V*i*a*s*a*t N*D*S e m u OK > example NRK1 HD (4.8E)
- C*a*n*a*l*D*i*g*i*t*a*l*N*L I*r*d*e*t*o 2 Ok, but at the moment fta
- D*i*g*i tv only the rest of N2 are OK
f_i_x_e_d support:
- N*D*S S*k*y*I*t*a*l*i*a c*a*r*d*s
- T*i*v*u*s*a*t c*a*r*d
- HD*plus c*a*r*d
solved problem with any via cards !
+++Yabbervox++
- V*i*a*s*a*t N*D*S e m u OK > example NRK1 HD (4.8E)
- C*a*n*a*l*D*i*g*i*t*a*l*N*L I*r*d*e*t*o 2 Ok, but at the moment fta
- D*i*g*i tv only the rest of N2 are OK
f_i_x_e_d support:
- N*D*S S*k*y*I*t*a*l*i*a c*a*r*d*s
- T*i*v*u*s*a*t c*a*r*d
- HD*plus c*a*r*d
solved problem with any via cards !
+++Yabbervox++
Last edited:
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 226p for Clarke Tech 5000 HD Combo Plus
-Fixed sending repeated commands Diseq
-Amendments to the Static IP mode
-Fixed Loop Out.Rabotaet work, if the thermometer is not included
-Added support for Cyrillic file names and folders via STBdaemon
Not has the Italian language in the menu
FW is not the usual team, so do not say "official"
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
F16 New Firmware 226p for Clarke Tech 5000 HD Combo Plus
-Fixed sending repeated commands Diseq
-Amendments to the Static IP mode
-Fixed Loop Out.Rabotaet work, if the thermometer is not included
-Added support for Cyrillic file names and folders via STBdaemon
Not has the Italian language in the menu
FW is not the usual team, so do not say "official"
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 228p for Clarke Tech 5000 HD Combo Plus
- Back lost on the road (227) LOOP, Dolby sound for now there just after boot cndf settings - no need to dumb pereskanivat channels ....
- New fonts, though, the Koreans mixed up lowercase letter d with a capital .... improvers Shoot! like only a hard line sign had to be repaired.
- Refresh the patch emu on: BisTV, Canal + NL
Not has the Italian language in the menu
NOTE:
FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing
this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
F16 New Firmware 228p for Clarke Tech 5000 HD Combo Plus
- Back lost on the road (227) LOOP, Dolby sound for now there just after boot cndf settings - no need to dumb pereskanivat channels ....
- New fonts, though, the Koreans mixed up lowercase letter d with a capital .... improvers Shoot! like only a hard line sign had to be repaired.
- Refresh the patch emu on: BisTV, Canal + NL
Not has the Italian language in the menu
NOTE:
FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing
this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
bozomustafa_68
Registered
- Messages
- 16,935
Emu Firmware c-tech 5000c
Code:
1.patched:
- C*a*n*a*l*S*a*t + *B*i*S*T*V ( note: only model SD TV )
2.f_i_x_e_d support:
- T*N*T*S*a*t (
+++Yabbervox++
Last edited:
bozomustafa_68
Registered
- Messages
- 16,935
EMU Firmware for C-Tech HD 5000CPlus 228p
Code:
1.patched:
- C*a*n*a*l*S*a*t + *B*i*S*T*V ( note: only model SD TV )
2.f_i_x_e_d support:
- T*N*T*S*a*t (
+++Yabbervox++
Last edited:
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 230p for Clarke Tech 5000 HD Combo Plus
- Added adjustment step frequency during a blind search. To speed up the search, use step 16 or even 32. By Pass transponders with low SR total search time is much shorter. The band TP with SR = 27500 about 40M, so to save time, satellites popular providers better scan with increments of 16 or 32. For example, when installing step 16 for all channels of pluses, tricolor and the surface will be found for the BLIND, about 3 minutes !!!!!!
- Radically changed the management Povorotkoy mode spectrum. Now the step size of rotation using the menu control Diseqc 1.2, and, if pressed briefly takes place step by step movement, but if the button to the left-right to keep the motor goes into continuous motion. Stopping occurs when you release the button.
- Get back the function "Check Zalochku" all transponders in the window of the spectrum, start and stop the yellow button.
- Fixed Trouble with the soundtrack, the silent channels had or rescan the transponder again or call the menu and then exit.
- An experiment to equalize sound levels Dolby and conventional. If bad, it will return to the option as in 223.
Not has the Italian language in the menu
NOTE
FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
F16 New Firmware 230p for Clarke Tech 5000 HD Combo Plus
- Added adjustment step frequency during a blind search. To speed up the search, use step 16 or even 32. By Pass transponders with low SR total search time is much shorter. The band TP with SR = 27500 about 40M, so to save time, satellites popular providers better scan with increments of 16 or 32. For example, when installing step 16 for all channels of pluses, tricolor and the surface will be found for the BLIND, about 3 minutes !!!!!!
- Radically changed the management Povorotkoy mode spectrum. Now the step size of rotation using the menu control Diseqc 1.2, and, if pressed briefly takes place step by step movement, but if the button to the left-right to keep the motor goes into continuous motion. Stopping occurs when you release the button.
- Get back the function "Check Zalochku" all transponders in the window of the spectrum, start and stop the yellow button.
- Fixed Trouble with the soundtrack, the silent channels had or rescan the transponder again or call the menu and then exit.
- An experiment to equalize sound levels Dolby and conventional. If bad, it will return to the option as in 223.
Not has the Italian language in the menu
NOTE
FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
Firmware Clarke Tech 5000 HD Combo Plus
F16 New Firmware 231p for Clarke Tech 5000 HD Combo Plus
- Fixed critical bug - Malfunctioning LOOP function. In shutdown mode the thermometer bug leads to excessive heating in the mode stendbay. Especially if the previous channel was switched off with the transponder with vertical polarization.
Not has the Italian language in the menu
NOTE:
FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
Regards
VeRDe
F16 New Firmware 231p for Clarke Tech 5000 HD Combo Plus
- Fixed critical bug - Malfunctioning LOOP function. In shutdown mode the thermometer bug leads to excessive heating in the mode stendbay. Especially if the previous channel was switched off with the transponder with vertical polarization.
Not has the Italian language in the menu
NOTE:
FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!
1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.
2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.
It 's always better before you do this and save the settings and softcam and reset the decoder!
Regards
VeRDe