Metabox Tools & Editors

dreamer1983

Super VIP
Messages
4,878
METABOX_UPDater_V.1META_OriginaL

METABOX_UPDater_V.1META_OriginaL
=======================
Make manually the new keys & CCWs key
for metabox receiver

With that you doun,t need software
just open the Metabox softcam edit there the new codes
after than open the upgrader and send all the new keys into the receivers
this make need only two minit
Enjoy!
 

marokino08

Super VIP
Messages
7,462
all metabox digi tv editor

demo1gma.gif
 

hilton

Registered
Messages
7,622
MetaDream_Dreamsoft Edit v1.5: - Update all keys in Dreamsoft/Metadream/Fun Editor file from "softcam.key" file - Extraction de toutes les clés présentes dans Dreamsoft, Metadream & Fun Editor file au format softcam - Extract all keys found in Dreamsoft, Metadream & Fun Editor file as softcam file - Exporter les clés extraites dans un format texte. - Export extrated keys in text format. - Correction d'autres bugs - fixing other bugs
 

ABI.M

Registered
Messages
323
Metabox JTaG

portant note before you start:
All this stuff is for people with experience on electronics you can use it at your own risk.
1) The Jtag cable should not be longer than 12". Best to keep it as short as possible.
2) Before you decide to upgrade your receiver firmware, please do a backup of your original firmware
3) Your receiver flash rom can be erase and program again and again.
4) Loading the wrong file into your receiver will not damage your flash rom but only render your
receiver non-functioning. So if you happen to load the wrong file to your receiver, you can use
Jtag to reprogram it.
5) If Jtag can read your flash rom, then the flash rom is fine. If not, then is corrupted.
6) It is always safer to use Jtag to upgrade your receiver than to use Null modem cable.
7) When you use Null Modem cable to load firmware into your receiver, even a slight error on the
serial port or cable will affect the transfer of file from your computer to the receive​
 

dreamer1983

Super VIP
Messages
4,878
Metabox Dump By Coldplay12

Metabox Dump By Coldplay12
Metabox1_28F160c3
Metabox10_28F160c3
Metabox10_29Lv160
Metabox I_MSS5550
MetaboxII_29Lv160Attc
Metabox II_Msr-5450
Metabox8800Fta
Metabox III_29w160
 

dreamer1983

Super VIP
Messages
4,878
hi

all channels Nilsat
Flash do your Metabox 1, 2, 3 with ABOX WITH METABOX once done
go to menu, then click SYSTEM PARAMETER SETUP A / V
then choose MSSP share
HaTy.exe excute the end and do not forget the cable RS32



server free Abox
 
Top