Using Oscam with SoftCam.key to decrypt BISS

not constant.cw only SoftCam.key usr/keys/SoftCam.key

[reader]
label = emulator
protocol = emu
device = /usr/keys/SoftCam.Key
caid = 0E00,0500,090F,1010,0604,2600
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000
group = 1

biss channels with same SID working SIC Internacional 16°E,Fox Sport Europe 7°E

SIC Internacional 16°E SID=0001
Fox Sport Europe 7°E SID=0001

Thanks for your reply.
Is it possible to open also ESPN Carribean 2 on 15 W with osemu/oscam-emu (on my receiver it opens only ESPN Carribean)?
If yes, could you please post the SoftCam.Key entries ?

working
F 03850134 00 593AF487C8216E57 ;Caribbean 901 (15.0°W)
F 03850134 01 593AF487C8216E57 ;Caribbean 901 (15.0°W)
F 03860135 00 AB72DDFAC7FB39FB ;Syndication 902 (15.0°W)
F 03860135 01 AB72DDFAC7FB39FB ;Syndication 902 (15.0°W)

Thanks again. What oscam version are you using ? With osemu (not oscam-emu) it works only with F 03851FFF ..., and only Carribean 901

oscam-svn11352-dreambox_fpu-webif-emu.

ditev said:

7E
11045 V 9875 HD
ID : MULTI Koeln
H.264 - 4:2:0
IIHF Ice Hockey World Championship 2017
Sweden vs Russia

CW: B0 51 C9 CA 4B F0 E5 20

Click to expand...

I have it running for powervu and this looks for example so:
"P 0009 01 80XXXXXXXXXXA4 ;Fam/Pulse 9.0E"

I am unsure how this works with sofcam.key entries on oscam for biss. How should look the right biss line for the feed above?

Thanks very much for any help!

F 00010200 00 8668311F2AD6D1D1 ;11056 V/9875 (7°E)
F 00010200 01 8668311F2AD6D1D1 ;11056 V/9875 (7°E)

would anyone please confirm
does oscam emu work with BISS keys using const.cw file
reason - there are many channels with same sid but oscam emu decrypt only one service In softcam

- I use mainly SoftCam.Key as a rule using # for some unimportant duplicate SID-VPID list rare cases (especially for some russian channels) . I don't use 1FFF VPID but the correct hex value after conversion from decimal value . Reader constant.cw rarely used by me exclusively for difficult cases , 3.0°E etc. to avoid any conflicts with the main emu . Mgcamd 1.38 srf also works fine with the same file and some receivers need it for some public biss channels at 3.0°E .

sa321 said:

would anyone please confirm
does oscam emu work with BISS keys using const.cw file
reason - there are many channels with same sid but oscam emu decrypt only one service In softcam

Click to expand...

Yes my oscam emu works with constant.cw and opens all the biss channels.
But first I made oscam ( without emu ) working on OpenPli with constant.cw, then I removed it and I have instaled oscam emu from here:
http://178.63.156.75/paneladdons/OSCamEmus/11384/
In the SoftCam.Key file there is just one BISS key left for the chanel Bolt (4.8E), that I do not use. All other biss keys are in constant.cw
Look these 2 channels
2600:000000:0001:0020:1FFF:0134: ; SIC intl Portugal (16.0°E)
2600:000000:0001:005A:1FFF:0064: ;Kanal D Romania (16.0°E)
work in constant.cw

I hope it helps

Azsambe said:

Yes my oscam emu works with constant.cw and opens all the biss channels.
But first I made oscam ( without emu ) working on OpenPli with constant.cw, then I removed it and I have instaled oscam emu from here:
http://178.63.156.75/paneladdons/OSCamEmus/11384/
In the SoftCam.Key file there is just one BISS key left for the chanel Bolt (4.8E), that I do not use. All other biss keys are in constant.cw
Look these 2 channels
2600:000000:0001:0020:1FFF:0134: ; SIC intl Portugal (16.0°E)
2600:000000:0001:005A:1FFF:0064: ;Kanal D Romania (16.0°E)
work in constant.cw

I hope it helps

Click to expand...

test please
constant.cw
2600:000020:0001:0020:1FFF:0134: ; SIC intl Portugal (16.0°E)
2600:00005A:0001:005A:1FFF:0064: ;Kanal D Romania (16.0°E)

softcam.key
F sid+videopid
F 00010064 00 kanal d
F 00010134 00 sic

Azsambe said:

Yes my oscam emu works with constant.cw and opens all the biss channels.
But first I made oscam ( without emu ) working on OpenPli with constant.cw, then I removed it and I have instaled oscam emu from here:
http://178.63.156.75/paneladdons/OSCamEmus/11384/
In the SoftCam.Key file there is just one BISS key left for the chanel Bolt (4.8E), that I do not use. All other biss keys are in constant.cw
Look these 2 channels
2600:000000:0001:0020:1FFF:0134: ; SIC intl Portugal (16.0°E)
2600:000000:0001:005A:1FFF:0064: ;Kanal D Romania (16.0°E)
work in constant.cw

I hope it helps

Click to expand...

check debug what key use

have you checked the keys

as I think the keys are wrong
as I have just downloaded them

and 1st look they don't match

clue
CF FC

EnoSat said:

check debug what key use

Click to expand...

07:56:14 00000000 s **** OSCam << cardserver log switched, version 1.20-unstable_svn, build r11384 (mipsel-newnigma2-linux-gnu)
2017/07/01 07:56:14 00000000 s (main) System name = Linux
2017/07/01 07:56:14 00000000 s (main) Host name = vuzero
2017/07/01 07:56:14 00000000 s (main) Release = 3.13.5
2017/07/01 07:56:14 00000000 s (main) Version = #1 SMP Fri May 19 23:10:24 CEST 2017
2017/07/01 07:56:14 00000000 s (main) Machine = mips
2017/07/01 07:56:14 00000000 s (main) Stb model = dm8000
2017/07/01 07:56:14 00000000 s (main) Stb vumodel = vuzero
2017/07/01 07:56:14 00000000 s (main) Stb boxtype = vuzero
2017/07/01 07:56:14 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 406
2017/07/01 07:56:14 00000000 s (emu) OSCam-Emu version 739
2017/07/01 07:56:14 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2017/07/01 07:56:14 00000000 s (main) signal handling initialized
2017/07/01 07:56:14 00000000 s (config) 11 provid's loaded
2017/07/01 07:56:14 00000000 s (config) 68 service-id's loaded in 2 ms
2017/07/01 07:56:14 00000000 s (reader) BISS [constcw] creating thread for device /usr/keys/constant.cw
2017/07/01 07:56:14 00000000 s (reader) oscam_emu [emu] creating thread for device emulator
2017/07/01 07:56:14 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/07/01 07:56:14 00000000 s (main) waiting for local card init
2017/07/01 07:56:14 50DF2D2D p (constcw) Local reader: BISS (file: /usr/keys/constant.cw)
2017/07/01 07:56:14 50DF2D2D p (reader) BISS [constcw] proxy initialized, server /usr/keys/constant.cw:0
2017/07/01 07:56:14 00000000 (emu) INFO: FFDecsa parallel mode = 64
2017/07/01 07:56:14 4439A3EB r (emu) Reading key file: /etc/tuxbox/config/SoftCam.Key
2017/07/01 07:56:14 4CF33ACE h (webif) webif: decompressed 179174 bytes back into 447040 bytes
2017/07/01 07:56:14 4439A3EB r (reader) oscam_emu [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2017/07/01 07:56:14 4CF33ACE h (webif) HTTP Server running. ip=0.0.0.0 port=8000
2017/07/01 07:56:15 4439A3EB r (reader) oscam_emu [emu] card detected
2017/07/01 07:56:16 4439A3EB r (reader) oscam_emu [emu] found card system emu
2017/07/01 07:56:16 4439A3EB r (reader) oscam_emu [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2017/07/01 07:56:16 4439A3EB r (emu) Reading key file: /etc/tuxbox/config/SoftCam.Key
2017/07/01 07:56:16 00000000 s (main) init for all local cards done
2017/07/01 07:56:16 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
2017/07/01 07:56:16 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
2017/07/01 07:56:16 00000000 s (anticasc) anti cascading disabled
2017/07/01 07:56:16 2BCEC2F4 c (client) plain dvbapi-client granted (myself, au=auto (2 reader))
2017/07/01 07:56:16 2BCEC2F4 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2017/07/01 07:56:16 2BCEC2F4 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum amount of possible filters is 32 (oscam limit is 32)
2017/07/01 07:56:18 2BCEC2F4 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
2017/07/01 07:56:18 2BCEC2F4 c (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in caPMT
2017/07/01 07:56:18 2BCEC2F4 c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 0020 VPID 0134
2017/07/01 07:56:18 50DF2D2D p (constcw) Searching CW for CAID 2600 PROVID 000000 SRVID 0001 ECMPID 1FFF PMTPID 0020 VPID 0134
2017/07/01 07:56:18 4439A3EB r (emu) Key not found: F 11FFF 00
2017/07/01 07:56:18 4439A3EB r (emu) Key not found: F 11FFF 01
2017/07/01 07:56:18 4439A3EB r (emu) Key not found: F 10134 00
2017/07/01 07:56:18 4439A3EB r (emu) Key not found: F 10134 01
2017/07/01 07:56:18 4439A3EB r (emu) Key not found: F 10100 00
2017/07/01 07:56:18 4439A3EB r (emu) Key not found: F 10100 01
2017/07/01 07:56:18 4439A3EB r (emu) Key not found: F 11FFF 00
2017/07/01 07:56:18 4439A3EB r (emu) Key not found: F 11FFF 01
2017/07/01 07:56:18 4439A3EB r (emu) ECM failed: Key not found
2017/07/01 07:56:18 50DF2D2D p (constcw) Entry found: 2600@000000:0001:0020:1FFF:0134:12 45 78 CF 87 54 21 FC 12 45 78 CF 87 54 21 FC
2017/07/01 07:56:18 2BCEC2F4 c (ecm) myself (2600@000000/0000/0001/09:AAC1D55587A3F831C0477D0FC91B69AE): found (5 ms) by BISS (P/2/2/2) - SIC INTERNACIONAL
2017/07/01 07:56:18 2BCEC2F4 c (dvbapi) Demuxer 0 found 1 ECMpids and 2 STREAMpids in PMT

technodvl2 said:

have you checked the keys

as I think the keys are wrong
as I have just downloaded them

and 1st look they don't match

clue
CF FC

Click to expand...

I have made a screenshot for you



http://store.picbg.net/pubpic/0A/7F/4626ddd131750a7f.jpg

I know your not English im not too
but if you read that again


have you checked the keys

as I think the keys are wrong
as I have just downloaded them

and 1st look they don't match

clue
CF FC

you should notice it says I download some keys from
this forum
and they were wrong

and whoever wanted to see SIC INT
double check them

but thanks

using Multics oscam and camd3

The keys from here are correct

http://www.sat-universe.com/showthread.php?t=200363&page=48

http://www.sat-universe.com/showthread.php?p=2036802537#post2036802537

#15

EnoSat said:

check same SID , oscam use only first if use same SID

Click to expand...

maybe onid