Discussion about Gamma Card

Brummie

Staff member
Administrator
Messages
5,794
CCcam 2.1.3 works ok with it on my DM800se but I cannot get it to read on my VU + Solo2
 

georgeflu

Registered
Messages
485
anyone managed to get a gamma card working in either slot on a VU + Solo2

i am not sure about vu solo2,but it is not worked in solo and ultimo which i tested (for the same reason that it is not work in the internal reader of dm500 and dm7020). dm800 (and 800se)was something different,it works with an os 1.4 card,but not 1.6.
so if the same happens to solo2,only in a smargo reader you will make this card work.
 

cyclades

Registered
Messages
544
I wish I could help you but your receivers are unknown to me. However what I wrote in post 812 is still ON.
Card tested in my edition piccollo and yumatu (hd series) OK !
 

Brummie

Staff member
Administrator
Messages
5,794
anyone using a Gamma in a Smargo Reader, I can see the card but no pic using CCCam 2.1.3 here are the config files

SERIAL READER : /dev/ttyUSB0 smartreader+
CAMKEY: /dev/ttyUSB0 00 00 00 00 00 00 00 00
CAMDATA: /dev/ttyUSB0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/ttyUSB0
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 6000000
B: /dev//ttyUSB0 06

CCcam is seeing the card in the reader but no pic

card reader /dev/ttyUSB0
handled 1(1) ecms and 0(0) emms
Irdeto card
Caid 604 ACS 1285 GRC
Provider 00 010244
 

Brummie

Staff member
Administrator
Messages
5,794
it works very well on phoenix reader connected with rs 232 to a enigma box
com port does not work on VU+ i have seen on ebay a 5 Crystal USB Card Reader Inc Phoenix/Smartmouse but not sure if these will read the gamma I have an old serial Phoenix/Smartmouse that worked on my 7020 and a violet phoenix
 

dj999

Registered
Messages
329
i tried the 5 crystal version and sent it back as it would not open the card. they sent me 2 crystal version and not had a problem with it.
 

carlborges

Registered
Messages
2
Hello,

My gamma card with Bulsatcom stopped working after years without any problems. Anybody else having trouble?
 
Top