Unplug the Dreambox is the first network
Start the program "DreamUp"
Please select the Com port to which your Dreambox is connected
Selection: network / network without
if network: enter local IP of the PC, enter third-IP for the box
the "Connect" button, click
and then the power cord then plug the box
Please wait while now
after the flash loader is transferred to the box, select the
Button box flashing "from the operating software
Select the firmware and click "open"
The upload is started, please wait
Box copies the new operating software into the flash memory, please wait
"The box was flashed successfully," click on "OK"
Click on "Disconnect / then Exit
Box restart...
DreamUP V1.3.3.5