M: { 01 }
C: { 01 }
A: { 02 }
U: { 01 }
T: { 00 }
G: { 01 }
N: { 07 } 5 30
K: { 05 }
Q: { 600 }
P: { 02 }
O: { 00 } username password
S: { 03 } 80
L: { 00 }
E: { 15 }
H: { 07 }
R: { 00 }
D: { 00 }
B: { 06 }
F: { 01 }
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 05 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }
# map all 180x nagra caids to 1801
# default is 01
F: { 01 }
This is my mg_cfg, what to edit?
Code:# EMM messages # 00 don't show any EMMs (default) # 01 show only valid EMMs # 02 show valid and bad EMMs with complete data display M: { 01 } # ECM messages # 00 don't show anything about ecm # 01 normal mode, show pids processed, decoded ecm and cw # 02 verbose mode, show valid and bad ECMs with data C: { 01 } # AU # 00 disable, no emm pids processed # 01 enable, emm pids always processed for soft-au and shared cards # 02 auto, emm started only if channel cant be decoded # 03 process emm pids for network cards update only A: { 01 } # key update (sum 01 or 02 with 04) # 01 update only new keys, default setting # 02 update all keys (used for valid PMK checking) # 04 enable TPS au # + tps SID, which pmt pid contains au pid U: { 05 } 0x12c0 # config files folder (softcam, autoroll, ignore/priority) # 00 files in /var/keys # 01 files in /tmp T: { 00 } # network mode, use summ for several clients # 00 no network (default) # 01 newcamd netclient # 02 radegast netclient # 04 camd3 netclient # 08 gbox netclient # 32 cccamd netclient, card list saved as /tmp/cccamd.info # (ECM only, supported server version up to 2.1.1, later not work) G: { 33 } # network retry, use summ for several options # 00 disable # 01 retry every new ecm # 02 try to connect to offline shares every Q: seconds # 04 try to detect and fast reconnect to lost (and not used atm) server # + XX messages number and YY seconds to reconnect # mg will reconnect to server, if no answer to last XX ecm/keepalive or # if no answer for last ecm or keepalive sent for YY seconds # set to 0 to disable N: { 07 } 5 30 # network ecm timeout in seconds K: { 05 } # newcamd dead routes connect retry, sec Q: { 600 } # network shares priority # 00 gbox, newcamd, cccamd, radegast, camd3 (default) # 01 camd3, radegast, cccamd, gbox, newcamd # 02 cccamd, newcamd, camd3, gbox, radegast P: { 02 } # on screen display type # 00 No OSD (default) # 01 neutrino # 02 enigma # 03 relook # + user password for http auth O: { 00 } username password # on screen display Options, summ of: # 01 show emu ecm # 02 show network shares messages # 04 show decoding failed / fta # 08 show emm keys update # + web port to use for osd S: { 03 } 80 # Log option, summ of: # 00 off # 01 network udp log # 02 log to console # 04 file, appended ! delete it by yourself, before it eat all your hdd # + IP udp-port log-file-name L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log # keep ecm cache, seconds # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory, # for openbox/elanvision users with remote shares make sense to set it higher than default value, # to not hammer cards while timeshifting or playing crypted recordings. E: { 15 } # cache option, summ of: # 00 Off (default) # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list # 02 Ecm data cache, remember CW for (E time # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart H: { 07 } # reread files, summ of: # 00 No (default) # 01 reread config file on channel change (including priority and ignore, but not replace/cache) # 02 reread SoftCam.Key on channel change # 04 reread SoftCam.Key if file changed R: { 04 } # debug, summ of # 00 off (default) # 01 debug ecm # 02 debug emm # 04 debug network ecm # 08 debug network emm # 16 debug network login # 32 show mem/cpu stats every 1 min # 64 add timestamp to log messages D: { 00 } # box type # 00 autodetect, change only if you think wrong type detected. # 01 dbox2 # 02 dreambox # 03 triple-dragon # 04 relook # 05 openbox # 06 dreambox/mips # 08 stapi/kathrein # 09 stapi/ipbox # 11 stapi/openbox B: { 06 } # map all 180x nagra caids to 1801 # default is 01 F: { 01 }
Everything was working before, sharing site gives me all necessary config files, with my username and password even, but it stopped working for no reason, I've changed nothing