EMU Firmware C-Tech HD (5000/5000C)

hilton

Registered
Messages
7,622
Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 232p for Clarke Tech 5000 HD Combo Plus

- Being tested to operate the exchange in a series of maps 52y reader receiver, as well as in multikas DRE CAM mode is added for decoding lightweight 5 channel Tricolor (First, Russia, NTV, Sports, News), in fact it is not used when you view them. The regime officially turned provider for non-recommended equipment for the action the draw and will not last forever ....
- Fix multikas VIA CAM to work with Kinoreysami 1,2,3 c maps NTV + in reader
- Auto resolution - it is now possible to disable apskeyler receiver, if apskeyler telecom cooler!!
- Small pleasant Revised

Not has the Italian language in the menu!



Code:
NOTE: FW is not the usual team, so do not say "official" Not being official, is at your own risk installing this firmware!


1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!

thanks verdeoro:thum:
 

Verdeoro

VIP
Messages
1,533
Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 234p for Clarke Tech 5000 HD Combo Plus

- Added support for DRE card mode multi protocol RS232
- Output BISS (CAID = 2600) in the playback menu - assigning workers RDA yellow button
- Activation ordered Kinoreysov 1, 2, 3 is now available in Reader
- Further development of ergonomics and translation of some created from scratch
- In the menu range is reduced inertia of the engine stop mode continuous movement after releasing the button, left and right on the remote
has a status - alfa

Not has the Italian language in the menu!

NOTE:
FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing
this firmware!


1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!
 

Verdeoro

VIP
Messages
1,533
Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 235p for Clarke Tech 5000 HD Combo Plus

-Added a command to activate the card tricolor. It is necessary for the convenience of early use of the card. Map does not require a native wood-kam to activate and run in the Doctors reader. The emergence of markets an extensive party official maps of the Tricolor receivers GS8300, but separately and at a reasonable price (in Minsk, for example, 135ue. 600руб of them in the account to activate an annual subscription optimum) necessitated the addition of software Doctors able to activate these cards directly to the reader receiver. A nice addition compared with the use of these cards in inexpensive Chinese clones oupenov 820 is the ability to watch and package SUPER OPTIMUM from transponder 11,804 in DVB-S2 MPEG4 SD test mode. What many have noticed that the Doctor, as HD receivers, even if only slightly, but still gives Kartika on the LCD panel better than any SDshnikov plus hdmi digital output. An important advantage of such a kit is much more secure access to content providers than using connections to external cards, but in some cases only one possible. Of course full support for the exchange of cards Series 52 and others - also works.

Not has the Italian language in the menu!

NOTE:
FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing
this firmware!


301mFeP.jpg


1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!
 

Verdeoro

VIP
Messages
1,533
Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 237p for Clarke Tech 5000 HD Combo Plus

Not has the Italian language in the menu!

NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!


101mGl8.jpg


1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!
 
Last edited:

bozomustafa_68

Registered
Messages
16,935
EMU Firmware for C-Tech HD 196p


Code:
- b*u*l*s*a*t 
-- Yabbervox --
note: HD+ card support updated but not complete. More coming soon.
 
Last edited:

kargo.25

Super VIP
Messages
9,725
- b*u*l*s*a*t
- c c c a m -> minor fixes
- DreCrypt -> minor fixes
- Via smartcard fixes
- BisTv minor fixes
-- Yabbervox --
 
Last edited:

Verdeoro

VIP
Messages
1,533
Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 239p for Clarke Tech 5000 HD Combo Plus

-No comment....

Not has the Italian language in the menu!

NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!


1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!
 
Last edited:

Verdeoro

VIP
Messages
1,533
Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 010p test for Clarke Tech 5000 HD Combo Plus

- This test software with the ability to remove RS232 log of work.

Not has the Italian language in the menu!

NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!

1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!

1044CSi.jpg
 

cycu_14

Registered
Messages
60
Dr HD F16 SW to Clarketech 5000 hp Combo plus

Wersja Beta do testowania F16_240p
1044EKJ.jpg
 
Last edited by a moderator:

Verdeoro

VIP
Messages
1,533
Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 241p for Clarke Tech 5000 HD Combo Plus

In the firmware test the following innovations:
- A new loader 500, allows you to unload not only the setting of the stick, but the very firmware.
- Unloading the setting of connections to external cards (CSinfo.txt) moved into the Software Update menu for convenience.
- Updated infobar (double-Info): a brief conclusion EPG is combined with the withdrawal of the extended EPG for ease of reading the contents of transmission.
- Updated default settings of satellites and transponders BISS keys (you need to reset all settings to the factory to start using them).
- Faster access to the menu, the green button - no annoying windows with warnings.
- Finalized mode Home balls through RS232: now uses a reliable manual selection mode receiver Master or Slave (Slave can be 6 doctors).
- Added selection algorithm with external cards in problem situations (by default, both the repeat is advisable to keep switched off to avoid the possibility of obtaining ban):
Retry = on / off (retry sending ECM after the end of time waiting for a response Timeout, with fast response and short time-out allows you to automatically detect the PID working or cid of several possible brute force with repetition);
Reloud = on / off (re-authorize the connection in case of failure on the server, it is useful when connecting to newcamd compatible server type mpcs, oscam .....)
- Amendments to working with Biss
- In the mode spectrum of the total added output signal power to quickly pre-assess the degree of targeting to the satellite.
- To further reduce response time to commands from the remote to navigate through the list of channels and on other menus. The doctor is a receiver with a really brisk menus.

Not has the Italian language in the menu!

NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing this firmware!


1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!

Regards VeRDe
 

tani1

Staff member
Super Moderator
Messages
17,767
New Firmware F16_242p for Clarke Tech 5000 HD Combo Plus

Changes:
- Access to the red button now right in the BISS keys editor
- Preliminary (before saving) BISS key check on the validity of an OK button, just select the row with a key, and click OK when the channel is opened in the background can be accessed from the list and move on to the next channel to Byss. Easier and faster to edit Haha ancient encoding from the remote, a full list of keys available in the menu unload-load on the USB as a text file with the keys.
- Added to the list of satellite providers of pre-sorted by a transponder, a so-called quick search provider, because why waste time deleting and editing, if you look supposed to ISP, not the whole Labuda, that is on satellite. This kind of search is particularly useful for beginners who are confused about the names of satellites and frequencies -
Choose from the list of satellites familiar name provider, scan, and immediately see - will appreciate the convenience!
- When recording a program broadcast EPG, but now you can read it on the GUIDE button in PVR menu list of records. "
Check option is available EPG announcement for each recorded transfer - will appreciate the convenience!
- New Fast algorithm for rendering the spectrum, which has now become more "alive"
- TV Guide is increased to 7 days, enough to wait and download it at least adds a new day in the list.
 

Verdeoro

VIP
Messages
1,533
Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 243p for Clarke Tech 5000 HD Combo Plus

- Acceleration shustrosti drawing of the spectrum, a new style of displaying the signal, until finished.
- Ability to call mode spectrum of any signal from the installation menus and select the frequency transponder
- A new algorithm for checking the availability of a new transponder with a pre-existing in the base of the satellite
- Amendments to download and display the TV Guide in infobare (enhanced mode OSD) menu and STV.
- Added ability to automatically change the date of the transition up or down button with the most recent transfer of the day following the first and back.
- Increased memory for loading guide, should be enough for 7 days.
- When viewing a list of records is optimized mapping of the transfer of TV Guide, if it had during its recording.
- Search for air channels made into a separate menu
- Added transparency to the menu cards and external BISS keys - for operational control of decoding.
- Small correction in the algorithm of rekonekta compounds
- Other improvements.

Not has the Italian language in the menu!

NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing
this firmware!


1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!
 

Verdeoro

VIP
Messages
1,533
Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 245p for Clarke Tech 5000 HD Combo Plus

- Using a new algorithm works with curves servers (from a test 070p), a description of configuration options in the next topic. Should be more stable than the 214th.
- Restored the possibility of determining caid = 2600 for BISS channels on the yellow button
- The red button is now used for direct call editor BISS keys. The ability to edit keys of other encodings stayed during unloading-loading via USB text file *. key

Not has the Italian language in the menu!

NOTE: FW is not the usual team, so do not say "official"
Not being official, is at your own risk installing
this firmware!


1) To move from CT to F16, charge via USB (or serial) firmware 180p, then the file boot_HTM8000_7109 and then the firmware F16 you want.

2) To move from F16 to CT, charge via USB (or serial) F16 firmware "1.00, then the file boot_HTM8000_7109 and then the firmware CT you want.

It 's always better before you do this and save the settings and softcam and reset the decoder!
 

kargo.25

Super VIP
Messages
9,725
Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 246p for Clarke Tech 5000 HD Combo Plus

- Finalization of the editor BISS keys
- Improved log data in detail komport status of the receiver with external cards.
- A small refinement of algorithms and reload retry
 
Last edited:

Verdeoro

VIP
Messages
1,533
Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 247p for Clarke Tech 5000 HD Combo Plus

- Repaired menu yellow button, broken with the 245p firmware. Now displays and BISS (caid = 2600) and is again the ability to manually bind the working RDA for faster channel switching time.
- Dorabotaka algorithms retry / reload. Now reload and the "right" time-out enable circumvention antikaskading constraints (useful for PVR functions).
 

tani1

Staff member
Super Moderator
Messages
17,767
New Firmware F16_248p for Clarke Tech 5000 HD Combo Plus

Changes:
- Memory EPG increased to 8 days
- Improved OSD style and algorithm update EPG for current and next transmission.
- Changes in the mode spectrum (the most important information is now more evident than with the service).
- Fix the display of some letters of the Ukrainian language in STV, the channel name and records
- other improvements, carried over from 104 to F15 ...

(scale of signal quality in decibels still under refinement ...)
 

kargo.25

Super VIP
Messages
9,725
Firmware Clarke Tech 5000 HD Combo Plus

F16 New Firmware 249p for Clarke Tech 5000 HD Combo Plus
 
Last edited:

tani1

Staff member
Super Moderator
Messages
17,767
New Firmware F16_250p for Clarke Tech 5000 HD Combo Plus

Changes:
- Insert new EMU Cryptoworks keys on Astra 19,2
- Changes in the EPG, Infobar, Records List
 
Top