Vantage HD Linux Firmware

Status
Not open for further replies.

tani1

Staff member
Super Moderator
Messages
17,767
29.10.2010 Version 01.04ML-O ( first Linux version for VANTAGE VT-1 )
Getting started:
- The update takes about 20 minutes. The channel list is included for the first time, then edit the channel list separately. To avoid possible problems before you save your settings on the USB stick.

Important notes:
- Change the remote control buttons
Mute (3) => VANTAGE portal
Swap (33) => Mute
Swap is now on the PIP button. Press 1 time = PIP press, 2 times SWAP

Amendments to the RTOS:
- HbbTV supported
Once the network settings are correct and they will switch to a channel with HbbTV right below the red button is displayed, by pressing the button then IP HbbTV can be called. For the functions within the HbbTV side channels are responsible, should not be selected or a few points show no reaction as you dial this is an incomplete HbbTV page and not due to the receiver.

Web radio
- The function can press the yellow button to activate. After one of the web radios can call the text file can be edited on the storage medium with other streams. Please use this only full-text editors, wrong items can cause crashes. There are only recognized m3u streams.

Playlists can be created
- The playlist is created directly in Media Player.
The number of files per playlist is limited to 256. The number of playlists is not limited.

FTP Server:
The access to the FTP server for Linux:
Users. vt1
Password: vantage

Wireless USB
- The WiFi mode is selected in the Network menu. The required keys can be accessed through the Help function
 

bozomustafa_68

Registered
Messages
16,935
10/11/2010 Version 2.01ML-O with Legacy Cam Support
Getting started
- The update takes about 20 minutes. The channel list is included for the first time, then edit the channel list separately. To avoid possible problems before you save your settings on the USB stick.

Changes:
- LegacyCam is now supported
o The restrictions on the cams come only when recording the HD + channel to bear. For all other channels, the PVR has no restrictions.
 

tani1

Staff member
Super Moderator
Messages
17,767
18\02\2011 - New Linux Software Version 02.08ML-O for Vantage VT-1
Getting started:
- The update takes about 20 minutes. The channel list is included for the first time, then edit the channel list separately. To avoid possible problems, back up your settings before on the USB stick.

Changes:
- Channel List Update
o Old transponders and channels were removed, added to Sky channels to new frequencies, HD + created as a FAV list.
- RTL HbbTV
o It now HbbTV is supported on RTL.
- NTFS Support
o It is now supported on all drives (internal / external) the NTFS file system for recording and playback.
- switching improved.
- Fixed crash when switching channels.
- Fixed error when copying in the Vantage Player
- Fixed display bug in the favorite list
o EPG timeline shows the channel overview in the right time to
- Time synchronization channel added
- Performance improved
- Fixed display bug in the menu
 

marce

VIP
Messages
7,115
Neue Linux Software für den VT- Version 02.09ML-O BETA1


Code:
24.02.2011

Release Note

MPORTANT, please read:
If you experience problems after the update, do a factory reset with the menu item "Installation / Preferences / Factory Settings ".
Please backup before the factory reset your settings -> Menu / Software Manager / Windows system.
To perform a software update:
1. Start RTOS
2. Unzip the file on a USB disk.
3. Now connect the USB device to the receiver,
4. The receiver then from the menu / multimedia / media / USB update the file "*. lix" from USB disk
5. Confirm the question with "Yes"
6. The update is complete when the receiver restarts.
24/02/2011 Version 02.09ML-O BETA1
Getting started
- The update takes about 20 minutes. The channel list is included for the first time, then edit the channel list separately. To avoid possible problems, back up your settings before on the USB stick.
Changes:
- Improving the image distortion on HD channels
Yours sincerely,
Your VANTAGE - Linux Support
 

marce

VIP
Messages
7,115
Linux Software für den VT-1 ML-02.09 Beta2

Code:
14-03-11

Release Note
IMPORTANT, please read:
If you experience problems after the update, do a factory reset with the menu item "Installation / Preferences / Factory Settings ".
Please backup before the factory reset your settings -> Menu / Software Manager / Windows system.
To perform a software update:
1. Start RTOS
2. Unzip the file on a USB disk.
3. Now connect the USB device to the receiver,
4. The receiver then from the menu / multimedia / media / USB update the file "*. lix" from USB disk
5. Confirm the question with "Yes"
6. The update is complete when the receiver restarts.
03/14/2011 Version 02.09ML-O BETA2
Getting started
- The update takes about 20 minutes. The channel list is included for the first time, then edit the channel list separately. To avoid possible problems, back up your settings before on the USB stick.
Changes:
Some users reported after the update to 2:09 Beta1, that the box now has glitches which then resulted in a short time to crash the receiver. This problem is resolved
Yours sincerely,
Your VANTAGE - Linux Support
 

tani1

Staff member
Super Moderator
Messages
17,767
17\03\2011 - New Linux Software für den VT-1 ML-02.09 Beta3
03/17/2011 Version 02.09ML-O BETA3

Getting started:
- The update takes about 20 minutes. The channel list is included for the first time, then edit the channel list separately. To avoid possible problems, back up your settings before on the USB stick.

Changes:
- Added DLNA Support
- In the Network menu is now the DLNA client or server to start. (Tested with Windows 7, Nero Media Sever and Samsung I9000 Galaxy S). The charging time varies depending on the number of files / folders and their sizes.
- Anixe HD added to the default channel list

Yours sincerely,
Your VANTAGE - Linux Support
 

kargo.25

Super VIP
Messages
9,725
Here, the Linux 2.10 Changes:


* Assurance of future updates added. The Linux update files to end now. Ltp. * DLNA Shortcut added. The client can now, in the live image, to start "0" button. * Error during frequent starting the DLNA client fixed. * MP3 playback with resolution "Auto" setting. * Fixed FTP upload / download


DOWNLOAD - linux210.zip
 

tani1

Staff member
Super Moderator
Messages
17,767
31.03.2011 Neue Linux Software für den VT-1 Version 2.11M-O

1.Start RTOS (Menu / Other Settings / multi-boot).
2.Unzip the file on a USB disk.
3.Now connect the USB device to the receiver.
4.The receiver then from the menu / multimedia / media / USB update the file "*. dlp" from USB disk
5.Confirm the question with "Yes"
6.The update is complete when the receiver restarts.

Getting started

The update takes about 10 minutes. The channel list is NOT covered. If you do not use the default channel list, save your channel list before on the USB stick.

Changes:

  • Bildruckler on HD channels fixed.


31.03.2011 Neue Linux Software für den VT-1 Version 2.11ML-O

1.Start with the RTOS version 2.11. (This is the next update is no longer necessary. The file can then be replayed directly from Linux.
2.Unzip the file on a USB disk.
3.Now connect the USB device to the receiver.
4.The receiver then from the menu / multimedia / media / USB update the file "*. ltp" from USB disk
5.Confirm the question with "Yes"
6.The update is complete when the receiver restarts.

Getting started

The update takes about 20 minutes. The channel list is included. To avoid problems, save your channel list before on the USB stick.

Changes:

  • Bildruckler on HD channels fixed.
  • DLNA: It is now possible to play files over 2GB

Yours sincerely,
Your VANTAGE - Linux Support
 

kargo.25

Super VIP
Messages
9,725
Problem auf dem Transponder 11954 auf Astra behoben ( 3sat, zdf, Kika, ZDF Ino, ZDF_neo, ZDF Kultur )
Vorlaufzeit: Im Menü PVR Einstellungen kann nun eine Vorlaufzeit eingestellt werden.
USB Erkennung verbessert
DLNA: es werden mehr Ebenen angezeigt
Autoerkennung der WLan Verschlüsselung: es muss nach der Suche nur noch das Passwort eingegeben werden.
SD Karte: die SD Karte kann im Gerät NTFS formatiert werden. Dies behebt Aussetzer bei verschiedenen SD Karten.
die Anzeige von JPEG's mit hoher Auflösung wurde behoben.
HbbTV kann nun auch im Radiobetrieb benutzt werden.
Auto Update Funktion über Lan: Sobald eine neue Software verfügbar ist, wird dies angezeigt und kann dann vom Server geladen werden.
Portal: bei App's mit Eingabefeldern ( z.B. Ebay oder Lieferservice ) kann mit der Help Taste eine Tastatur zur Eingabe eingeblendet werden
 

tani1

Staff member
Super Moderator
Messages
17,767
05.12.2011 Software-Update für die Linux-Receiver / Version 2.20ML-O

1) Entpacken Sie die Datei auf einen USB-Datenträger.
2) Jetzt verbinden Sie das USB Gerät mit den Receiver.
3) Am Receiver wählen Sie über das Menü/Multimedia/Speichermedien/ USB das Updatefile "*.ltp" vom USB-Datenträger
4) Bestätigen Sie die Abfrage mit "Ja"
5) Das Update ist abgeschlossen wenn der Receiver neu startet.

Erste Schritte:

das Update dauert ca. 10 Minuten. Die Kanalliste wird übernommen. Sollten Sie nicht die Standard Kanalliste verwenden, sichern Sie Ihre Kanalliste vorher auf den USB Stick.

Änderungen:

AC3 wird bei externen Dateiformaten unterstützt.
neue Kanalliste: Skykanäle hinzugefügt
Wlan Verbindungsprobleme behoben ( SSID mit Leerzeichen im Namen )
Aussetzer bei den Videos der ZDF Mediathek behoben


Mit freundlichen Grüßen
Euer VANTAGE – Support


Download Firmware
 
Status
Not open for further replies.
Top