About OpenPLi-2.1-beta-dm800-20111107 by gjstroom

skabill2000

Registered
Messages
32
About OpenPLi-2.1-beta-dm800-20111107 With sim201-ssl84a by gjstroom

OpenPLi-2.1-beta-dm800-20111107 by gjstroom


Hello

I installed your GREAT image in my DH800HD flash and no reboot ...

It seems to be really stable ... GOOD JOB :thum:

I continue the tests ... :D

THANKS
 
Last edited:

skabill2000

Registered
Messages
32
THX Robi62 ... :thum:

I followed this way in the TSPanel 4.0 to fix the problem

TSpanel / Addons / Sim2 Addons / sim2-tools / Webinterface patch mfaraj 2.0
 

GreatDane

Registered
Messages
38
can this image flash directly on DM800 with openpli SSL82 image without flashing SSL84 first ? a bit confuse reading this massage from gjstroom : Be sure you have SSL84 on your box, if you get the "INVALID IMAGE (OR OLD VERSION)" error, flash SSL84 first and try again.
thanks
 

skabill2000

Registered
Messages
32
can this image flash directly on DM800 with openpli SSL82 image without flashing SSL84 first ? a bit confuse reading this massage from gjstroom : Be sure you have SSL84 on your box, if you get the "INVALID IMAGE (OR OLD VERSION)" error, flash SSL84 first and try again.
thanks

No ... I tried to flash this way (open pli#SSl82 to open pli#SSL84 directly) and I received the "INVALID IMAGE (OR OLD VERSION)" message.

So I flashed first with the SSl84a.nfi ... and when the web interface asked me to reboot, I pressed and stayed pressed on the front button of the Box in aim to flash with the OpenPLi-2.1-beta-dm800-20111107 With sim201-ssl84a by gjstroom.

After that the box rebooted and I restored my settings ...
 
Last edited:

GreatDane

Registered
Messages
38
No ... I tried to flash this way (open pli#SSl82 to open pli#SSL84 directly) and I received the "INVALID IMAGE (OR OLD VERSION)" message.

So I flashed first with the SSl84a.nfi ... and when the web interface asked me to reboot, I pressed and stayed pressed on the front button of the Box in aim to flash with the OpenPLi-2.1-beta-dm800-20111107 With sim201-ssl84a by gjstroom.

After that the box rebooted and I restored my settings ...
thanks for you reply.You mean you flash SSL84a.nfi without reboot then flash OpenPLi-2.1-beta-dm800-20111107 With sim201-ssl84a by gjstroom ? and the front button you mean is the back button for Internet Explorer right ? Btw, the SSL84 link giving by gjstroom are actually link for SSL84 not SSL84a right ? thanks again.:thum:
 
Last edited:

skabill2000

Registered
Messages
32
thanks for you reply.You mean you flash SSL84a.nfi without reboot then flash OpenPLi-2.1-beta-dm800-20111107 With sim201-ssl84a by gjstroom ? and the front button you mean is the back button for Internet Explorer right ? Btw, the SSL84 link giving by gjstroom are actually link for SSL84 not SSL84a right ? thanks again.:thum:

Yes GreatDane ...


1 : Shutdown your dreambox with your Open Pli SSL82..
2 : Press and hold front button on the front pannel of your dreambox to obtain the IP Adress of the box.
3 : Flash with SSL84a.nfi by typing the IP adress of your box in the adress barr of internet explorer and select the file.
4 : when flash 100% don't click on "REBOOT" on internet explorer
5 : Press and hold front button on the front pannel of your dreambox to obtain the IP Adress of the box.
6 : Flash with OpenPLi-2.1-beta-dm800-20111107 With sim201-ssl84a.nfi by opening a new internet explorer window and typing the IP adress of your box in the adress barr of internet explorer and select the file.


For the step 3, I used this file SSL84a.nfi
SSL84a.nfi

This new OpenPLi-2.1-beta-dm800-20111107 With sim201-ssl84a.nfi is really STABLE ... 20 hours without any problem, no freeze, no reboot ....
 
Last edited:

GreatDane

Registered
Messages
38
Yes GreatDane ...


1 : Shutdown your dreambox with your Open Pli SSL82..
2 : Press and hold front button on the front pannel of your dreambox to obtain the IP Adress of the box.
3 : Flash with SSL84a.nfi by typing the IP adress of your box in the adress barr of internet explorer and select the file.
4 : when flash 100% don't click on "REBOOT" on internet explorer
5 : Press and hold front button on the front pannel of your dreambox to obtain the IP Adress of the box.
6 : Flash with OpenPLi-2.1-beta-dm800-20111107 With sim201-ssl84a.nfi by opening a new internet explorer window and typing the IP adress of your box in the adress barr of internet explorer and select the file.


For the step 3, I used this file SSL84a.nfi


This new OpenPLi-2.1-beta-dm800-20111107 With sim201-ssl84a.nfi is really STABLE ... 20 hours without any problem, no freeze, no reboot ....
thanks for your guide mate:) it is very kind of you:thum:
 

gjstroom

Registered
Messages
100
Do not update your OpenPLi online, they updated drivers to 20111109 which are not compatible with SSL84(a) !
If you know what you're doing you can edit your /usr/lib/opkg/status file. Search for the line with 2.6.18-7.4-dm800-20110902-r6.3 and replace the 0902 part with 1109.
 

amad43

Registered
Messages
39
Do not update your OpenPLi online, they updated drivers to 20111109 which are not compatible with SSL84(a) !
If you know what you're doing you can edit your /usr/lib/opkg/status file. Search for the line with 2.6.18-7.4-dm800-20110902-r6.3 and replace the 0902 part with 1109.

dear first of all thanks for your work,today i update the image online and it running very well.
 

skabill2000

Registered
Messages
32
dear first of all thanks for your work,today i update the image online and it running very well.

+1 ... :thum:

modification of /usr/lib/opkg/status file and today online update without any problem ... Thanks gjstroom

is anybody know how to configure a Wireless USB dongle on this image ??


Thanks
 

skabill2000

Registered
Messages
32
Mine only works when i configure a static ip address using a Linksys Wireless-G dongle.

what is the chipset used in your Linksys Wireless-G dongle ? and how configure it in network pannel of the openpli.

Actually my box is configured to use the RJ45 lan connection and I don't find any wizard to change to a Wlan connection...

My dongle use the Ralink RT3070L chipset ...
 
Last edited:

gjstroom

Registered
Messages
100
what is the chipset used in your Linksys Wireless-G dongle ? and how configure it in network pannel of the openpli.

Actually my box is configured to use the RJ45 lan connection and I don't find any wizard to change to a Wlan connection...

My dongle use the Ralink RT3070L chipset ...

It's detected as a ralink wireless network device, in the network menu where your lan connection also is displayed. It uses the rt73 driver.
 

cokesux

Registered
Messages
190
OpenPLi can run from multiboot, but it never has supported BA when it is installed in flash.

--
 

BM300

Super VIP
Messages
886
Yes GreatDane ...


1 : Shutdown your dreambox with your Open Pli SSL82..
2 : Press and hold front button on the front pannel of your dreambox to obtain the IP Adress of the box.
3 : Flash with SSL84a.nfi by typing the IP adress of your box in the adress barr of internet explorer and select the file.
4 : when flash 100% don't click on "REBOOT" on internet explorer
5 : Press and hold front button on the front pannel of your dreambox to obtain the IP Adress of the box.
6 : Flash with OpenPLi-2.1-beta-dm800-20111107 With sim201-ssl84a.nfi by opening a new internet explorer window and typing the IP adress of your box in the adress barr of internet explorer and select the file.


For the step 3, I used this file SSL84a.nfi


This new OpenPLi-2.1-beta-dm800-20111107 With sim201-ssl84a.nfi is really STABLE ... 20 hours without any problem, no freeze, no reboot ....


In step 5
We could simply restart the browser and put in the Box IP
Instead of pressing and holding down button on the front pannel of dreambox to obtain the IP Adress of the box.

Regards
BM300
:)
 

Hell-o

Registered
Messages
150
Hey people can you help me I have update openpli from online update and now tuner don't work anymore how can I resolve this is any way to go back ?
 
Top