butchyboy
Registered
- Messages
- 302
hi guys i,ve a 1.2m irte prime focus satelite dish and polarmount and actuator arm.
its been set up years,but i feel its not pulling in all satelites like it use to.am not sure my dish was properly set up from day one.
i am in southeast ireland and my nearest due south is 7.west
Dish Setup Data
Elevation: 29.6°
Azimuth (true): 179.8°
Azimuth (magn.): 183.2°
LNB Skew [?]: -0.1°
Latitude: 52.8710°
Longitude: -7.1676°
got the above from dishpointer by entering latitude.
here are my details for 7.west so im almost spot on due south.
my questions are,where do i set the degree,s mark to on polar mount?, and also the dish elevation ?.
i know i keep the dish and polarmount straight and directly facing due south.
but im not sure of the degree,s mark on polarmount declination as to where it should be set and also dish elevation.
any help or advice would be truly appreciated,thanks
its been set up years,but i feel its not pulling in all satelites like it use to.am not sure my dish was properly set up from day one.
i am in southeast ireland and my nearest due south is 7.west
Dish Setup Data
Elevation: 29.6°
Azimuth (true): 179.8°
Azimuth (magn.): 183.2°
LNB Skew [?]: -0.1°
Latitude: 52.8710°
Longitude: -7.1676°
got the above from dishpointer by entering latitude.
here are my details for 7.west so im almost spot on due south.
my questions are,where do i set the degree,s mark to on polar mount?, and also the dish elevation ?.
i know i keep the dish and polarmount straight and directly facing due south.
but im not sure of the degree,s mark on polarmount declination as to where it should be set and also dish elevation.
any help or advice would be truly appreciated,thanks
Last edited: