Original Image for VU+ UNO

Ver 5.10 Release note

Open Embedded

- Update OE tree
- Support blind scan(uno)
- Add fancontrol Plugin(uno)
- Add wireless usb drivers
- Add WirelessLANSetup Plugin
- Support more media playback(uno)
- For details, please take a loot at git log.

Driver update

20110610
- Fix frontend open failure
- Support DDP passthrough on HDMI

20110708
- Support DTS audio codec
- Fix CI recognition problem when restart
- Fix restart crash/delay problem

USB Version

Flash Version

Ver 5.11 Release note

Open Embedded

- update blind scan(uno)
- update ManualFanControl Plugin(uno)
- remove udev-static
- For details, please take a loot at git log.

Driver update

20110715(uno)
- Lower the default FAN rpm
- Increase dynamic range of FAN speed

20110817
- Change key code of audio button(uno)
- Change remote control response code(remote control of uno works only in uno)
- Fix occasional not moving FAN problem(uno)
- remove udev-static

USB Version

Flash Version

Ver 6.0 Release note

Open Embedded
- Add WebBrowser plugin(Duo needs a bootloader update)
- Add UI postion control plugin
- Add 3D framebuffer control plugin
- Add remote control system code control plugin

- For details, please take a loot at git log.

Driver update

20111006
- improve DVB-C/T tuning(uno)
- Fix incorrect display of DVB-C/T SNR/AGC(uno)
- Fix high-bitrate problem in CI(uno, needs a FPGA update, New Rev 4.2 FPGA image is at http://archive.vuplus.com/download/fpga/vuuno/4.2/)
- Support 3D framebuffer
- Add interface for UI position setup
- Add redundant fpga device at /dev (uno)
- Add ioctl for hdmi_cec(get physical/logical addr.)
- Fix audo mute in pass-through(uno)
- Add interface to set the system code of the remote control(uno)
- Add interface to disable REC VFD icon(uno,duo)
- Add interface to control global alpha


DUO Boot loader update(duo_cfe_3_0_usb.zip)
- Increase update file size up to 128M Bytes
- Change the flash memory map(kernel size : 4M, /boot : 2M)
- ** NOTE ** : Delete the cfe_cfe_auto.bin at /vuplus/duo in USB after update is complete.

USB Version

Flash Version

VU+ UNO Firmware Upgrade

Important notice for Vu+ UNO users!

As promised, Vu+ UNO is now on sale from June, 2011.
Vu+ is very thankful for the interest in our new product and we will keep trying to update our products.

There was several reports about scanning problem in specific TP and new firmware is released to fix the problem.
We strongly recommend to upgrade your box if you find a problem in scanning channel(s) with your box.

There are two ways to upgrade your box.
One is using your USB memory stick and the other is upgrading directly from the internet.

Option A) Using USB memory stick.

Download firmware binary from the link below.
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Arial; color: #1800b1} span.s1 {text-decoration: underline ; letter-spacing: 0.0px}

http://archive.vuplus.com/download/fpga/vuuno/TS_PRO.dat

Save the download data file into USB memory stick.
Attach USB memory stick to your box and restart. (or restart GUI)
Goto FPGA plugin menu.
Select the data file in USB memory stick and start 'Upgrade'.
Restart your box.

Option B) Upgrade directly from the internet

Goto FPG plugin menu.
Download the data file by pressing 'Blue' button.
Select the downloaded data file and start 'Upgrade'.
Restart your box.

Please consult the link below for the detailed explanation of upgrade.

How to upgrade Vu+ UNO firmware (FPGA)

Ver 7.0 Release note

Open Embedded
- http://code.vuplus.com/gitweb/?p=vuplus_openembedded;a=shortlog;h=refs/heads/vuplus-1.6k

Driver update
20111114
- Fix HDMI CEC problem(wakeup from standby)
- Reduce zapping noise in some A/V Receiver
- Fix Recording/Playback problem
- Fix High bitrate tuning problem(Uno, MUST Need a FPGA update, http://archive.vuplus.com/download/fpga/vuuno/4.4/)
- Improve media playback
- Fix skip problem in media playback
- Change temperature calculation algorithm.(uno, ultimo)
- Change the lowest FAN speed(ultimo)
- Fix incorrect keycode in the remote control(ultimo)
- Add interface to control VFD in the application(ultimo)

20111122
- Fix video problem(at 20111114)

20111222(Needs Image update)
- Switch to kernel 3.1.1
- Improve recording(reduce load)
- Improve vtuner performance
- Support german remote keyboard(ultimo)

20111229
- Add security enhancement
- Reduce FPGA update time(uno, ultimo)
- Improve recording

20111230
- fix 3d setup in MODE1
- fix ui position setup problem

20120102
- Fix recording problem

20120104
- Add interface to check genuine box
- Fix recording stop problem.

20120118
- Fix some DVB-CI modules recognition problem

20120126
- clean up and speed up dmx driver

USB Version

Flash Version