When entering Biss keys on a TM/NDF type receiver please check

william-1

william-1

Feed Hunter
Messages
4,382
Biss Key change

7 east
11088 H 7199 3/4 MPEG-4 HD
id = Snooker Main[/QUOTE]

Wrong keys posted in Biss keys #481 & #482
My keys posted in #483 & previous posts are correct #478 & #479

When you post keys please check that the 7th & 8th + 15th & 16th keys on an NDF/Technomate type receiver have changed to the correct key if you have enter as here incorrectly Thanks.

http://www.sat-universe.com/showthread.php?t=257199&page=49

When I entered the keys in post #481 they did not work on my TM5502HD so I wrongly assumed that the keys had changed so I enter the same keys on my TM6902HD & the channel cleared when I checked I noticed that the 11 posted for the 7th & 8th + 15th & 16th was incorrect :) :thum:
 
Last edited:
manic01

manic01

Super VIP
Messages
2,553
Well done @william-1, never realised you found your own biss keys?
How long have you been doing it and what kit do you use, would love to give it a go sometime.
Thanks for your time.
 
K

kebien

Registered
Messages
1,329
The 7th/8th/15th/16th characters are called checksum.
Some receives do not pay attention to this value,and some do.
And to make sure this value is ok,just use your calculator in hex mode and sum the first three bytes to get the fourth byte,then the next three bytes to get the 8th byte.
 
manic01

manic01

Super VIP
Messages
2,553
@william-1
I take it, it was someone elses keys you posted and you dont find them your self after all?
Or am I wrong.
Thanks for reply.
 
You must log in or register to reply here.
Top