Latest Mbox Web Interface

tani1

Staff member
Super Moderator
Messages
17,767
MBox Web Interface by cable_stork

Version: 1 BETA 1 - PRE
Release date: 11 Mar 09
Supports MBox version: 0.4 BETA 023-4

Installation instructions:
--------------------------

1. Place binary file in /var/bin or any other desired location

mbox-wi.x86 - linux pc
mbox-wi.ppc - dreambox (ppc)

2. Copy mbox-wi-templates directory (and contents) to /var/etc/mbox-wi-templates/

3. Copy mbox-wi.cfg to /var/keys/mbox-wi.cfg

4. Change web server listen port in mbox-wi.cfg (or leave as default - 23000)

Changelog:
----------
- First release
- No 'Reset' support
- Known styling bug on CwShare Configuration page
- No HTTP authentication
- Largest supported cwshare.cfg is 4.9kb
 

k@lkov

Super VIP
Messages
10,003
Mbox Web Interface v1.0 b2

Code:
[B]MBox Web Interface by cable_stork[/B]
Version: 1.0 BETA 2
Release date: 15 Mar 09
Supports MBox version: 0.4 BETA 023-4

[B]Installation instructions:[/B]
1. Extract archive using: tar xvf mbox-wi-1.0b2.tar.gz
2. Place binary file in /var/bin or any other desired location
mbox-wi.x86 - linux pc
mbox-wi.ppc - dreambox (ppc)
3. Copy mbox-wi-templates directory (and contents) 
   to /var/etc/mbox-wi-templates/
4. Copy mbox-wi.cfg to /var/keys/mbox-wi.cfg
5. Change web server listen port in mbox-wi.cfg (or leave as default - 23000)
6. Execute the binary file

PLEASE MAKE A BACKUP OF YOUR CWSHARE.CFG AND 
MBOX.CFG FILES BEFORE USING THIS PROGRAM

[B]1.0b2 Changelog:[/B]
- Changed how CSS is served (to improve stability)
- Added provider ident info on peer info page
- Added total number of peers online/offline on peers page
- Added card stat counter to peers & peer info pages
- Now defaults to peers page
- Now allows mbox.cfg to be in other locations (fixed bug)
- Added 5 second cache for temporary files
- Reduced request poll time to 100ms (faster page loads)
- Prints debug messages to /tmp/mbox-wi.log (max filesize 100kb) - 
  this can be disabled with the '-d' flag
 

k@lkov

Super VIP
Messages
10,003
Mbox Web Interface v1.0 b3

Code:
MBox Web Interface by cable_stork 
Version: 1.0 BETA 3
Release date: 18 Mar 09
Supports MBox version: 0.4 BETA 023-4

[B]Installation instructions:[/B]
1. Extract archive using: tar xvf mbox-wi-1.0b3.tar.gz
2. Place binary file in /var/bin or any other desired location
mbox-wi.x86 - linux pc
mbox-wi.ppc - dreambox (ppc)
mbox-wi.mips - dreambox (mips)
3. Copy mbox-wi-templates directory (and contents) to /var/etc/mbox-wi-templates/
4. Copy mbox-wi.cfg to /var/keys/mbox-wi.cfg
5. Change web server listen port in mbox-wi.cfg (or leave as default - 23000)
6. Execute the binary file

[B]Support:[/B]
I can be contacted on the mbox.exyusat.com forum 
and will be happy to help!
Suggestons welcome too.

PLEASE MAKE A BACKUP OF YOUR CWSHARE.CFG AND 
MBOX.CFG FILES BEFORE USING THIS PROGRAM

[B]1.0b3 Changelog:[/B]
- Compiled MIPS version
- No cwshare.cfg size limit (please make regular backups)
 

juli13

Staff member
Administrator
Messages
10,194
Mbox Web Interface v1.04

Mbox Web Interface v1.04

Version: 1.04
Release date: 29 Mar 09
Supports MBox version: 0.4 BETA 023-4

Installation instructions:
--------------------------

1. Extract archive using: tar xvf mbox-wi-1.04.tar.gz

2. Place binary file in /var/bin or any other desired location

mbox-wi.x86 - linux pc
mbox-wi.ppc - dreambox (ppc)
mbox-wi.mips - dreambox (mips)

3. Copy mbox-wi-templates directory (and contents) to /var/etc/mbox-wi-templates/

4. Copy mbox-wi.cfg to /var/keys/mbox-wi.cfg

5. Change web server listen port in mbox-wi.cfg (or leave as default - 23000)

6. Execute the binary file


Support:
--------

I can be contacted on the mbox.exyusat.com forum and will be happy to help!
Suggestons welcome too.

PLEASE MAKE A BACKUP OF YOUR CWSHARE.CFG AND MBOX.CFG FILES BEFORE USING THIS PROGRAM


1.04 Changelog:
----------------

- Improved stability
- Implemented maximum mbox-wi.log file size of 100kb
- Fixed problem with cwshare.cfg file size limit
- Added basic IP geo-location flags (not very good at the moment) - can be enabled from web interface config
- Changed versioning system
- Fixed bug where whitespaces were being removed from provider info
 

k@lkov

Super VIP
Messages
10,003
mbox web control v2.0

Thx to astronman
Code:
Modedd for Mbox servers.

Login user and pass is admin.

Extract files into /var/www/ on your server.

Before that you have to install Apache2 and php5 server.

Added P-Line generator and new color look.
 

marce

VIP
Messages
7,115
Mbox Web Interface v1.05

Code:
#####################################
# MBox Web Interface by cable_stork #
#####################################

Version: 1.05
Release date: 26 Apr 09

Installation instructions:
--------------------------

1. Extract archive using: tar xvf mbox-wi-1.05.tar.gz

2. Place relevant binary file in /var/bin or any other desired location

mbox-wi.x86
mbox-wi.ppc
mbox-wi.mips

3. Copy mbox-wi-templates directory (and contents) to /var/etc/mbox-wi-templates/

4. Copy mbox-wi.cfg to /var/keys/mbox-wi.cfg

5. Change web server listen port in mbox-wi.cfg (or leave as default - 23000)

6. Execute the binary file


Support:
--------

I can be contacted on the mbox.exyusat.com forum and will be happy to help!
Suggestons welcome too.

PLEASE MAKE A BACKUP OF YOUR CWSHARE.CFG AND MBOX.CFG FILES BEFORE USING THIS PROGRAM


1.05 Changelog:
---------------

- New theme
- HTML reorganisation
- Online peers without local cards now appear blue
- Card counter per peer on peer page
- New card counter format:
- Peers page: local - dist1 - dist2 - dist3 - dist4
- Peer info page: dist1 - dist2 - dist3 - dist4
- Support for Mbox version 0.5
- Identification of NewCS peer
- HTTP Server code reworking
- Extra logging
- Fixed sorting by Provider on peer info page
- Fixed cwshare.cfg edit box styling
- mbox.cfg now edited in textarea (temporary change)
- Added replacements for %27, %28, %29
- Fixed issue with newlines being added at the end of config files
 
Top