DGS r9580 for 9000hd

K

k@lkov

Super VIP
Messages
10,003
Code: 
[B]Cuberevo Series 1.0.(r9580) version[/B]
Image version : r9580
DB version : r9274

1. You??d better backup the channel list using PC Editor before 
   downloading the new images.
2. If your STB ??db version?? is an older version, you should download 
   the image with ??db.img?? like ??usb_kernel_root_db.img?? 
   ??usb_nobbot.img??
   If your STB ??db version?? is the same version, you can download 
   the image without ??db.img?? like ??usb_kernel_root.img??.
3. If AC power is unstable or disconnected while image downloading, 
   pictures may not appear on the screen properly. In that case, you 
   should make USB download mode once more and perform downloading 
   the image again.
4. Please read the README file carefully before you start downloading.

ChangeLog:
DGS release r9580: ( 29/May/2009)
--------------------------------------------------------------
1. Add function displaying time always on Front panel
2. Add schedule recording title name on webif
3. Fixed video player panic when spdif is off
4. Fixed slow icon on TrickPlay and FilePlay
5. Mapping blue key as check key for 250-hd in filebrowser
6. Change hdd clean process on hddinit script
7. Syunchronized sleep Mode as power_control option
8. Adjust analog output level(advanced quality of Component, Composite and S-Video)
9. Update tp information Thor0.8W and Astra 19.2E
10. Fixed many small bugs
Click to expand...
 
S

se7en

Registered
Messages
2
Does anyone has similar problems than me and one of my friend here in Finland, that picture randomly skips at some of the channels? This has happened for us with all images that are based on these DGS/abcom -images (tested at least sifteam- and nlb-releases).

It looks like picture just jumps some parts of seconds forward suddenly. It happens very randomly, sometimes more ofter, and with some channels it doesn't seem to happen at all. A bit tricky to explain, at least with my English skills.

With E2-releases, that my friend has tried, problem seems to be a bit different since picture "jerks" with that all the time (I'm not sure about this, because haven't seen it myself).
 
G

Gman2oo6

Registered
Messages
16
se7en said:
With E2-releases, that my friend has tried, problem seems to be a bit different since picture "jerks" with that all the time (I'm not sure about this, because haven't seen it myself).
Click to expand...

If this happens you have to look at your screen resolution
720p 1080i 1080p with 50 or 60hz this last one may be the prob
go and set it to 50hz on 1080i or p it worked for me had the same and on 60hz it was jerking allot now at 50hz its all ok
 
R

Ross_37

Registered
Messages
69
Does anyone have a copy of this image nlbr9580 for the 9000hd they could post or send via PM . It is no longer on rapidshare
 
D

dypcdiver

Registered
Messages
22
I'm puzzled why you want such an old image as there are much better ones around now, PGI 1.5 for instance. You might find a copy on one of the German language sites.
 
Last edited:
I

iacovides

Registered
Messages
1
thanks made

:thum::thum:
k@lkov said:
Code: 
[B]Cuberevo Series 1.0.(r9580) version[/B]
Image version : r9580
DB version : r9274

1. You??d better backup the channel list using PC Editor before 
   downloading the new images.
2. If your STB ??db version?? is an older version, you should download 
   the image with ??db.img?? like ??usb_kernel_root_db.img?? 
   ??usb_nobbot.img??
   If your STB ??db version?? is the same version, you can download 
   the image without ??db.img?? like ??usb_kernel_root.img??.
3. If AC power is unstable or disconnected while image downloading, 
   pictures may not appear on the screen properly. In that case, you 
   should make USB download mode once more and perform downloading 
   the image again.
4. Please read the README file carefully before you start downloading.

ChangeLog:
Click to expand...
thanks made very much:thum:
 
You must log in or register to reply here.
Top