Openbox-Skybox installation tutorial-user manual

magictails

Registered
Messages
428
To add keys manually on Openbox

1. Go to menu "NETWORK SETUP"----CCCAM CLIENT SETUP"

2. go to MANAGE CCCAM CLIENT

3. Open constant.tw

4. Click GREEN Button on remote For add BISSKEY

After That enter the value like given bellow

For Example...


Tamil Box Office (TBO)

(Apstar 2R at 76.5°E 3840 H 27500-3/4 )

caid : 2600
PROVid : 0000
SID : OOOB
PMT PID: 0000
ECM PID: 0000
EVAN : 04 04 04 0C 40 40 40 C0
ODD : 04 04 04 0C 40 40 40 C0

BiSS keys are stored in constant.cw, other keys in SoftCam.key

constant.cw example:
2600:000000:02C7:02C7:1FFF::23 04 65 8C 10 10 71 91 23 04 65 8C 10 10 71 91; Fox Life Greece (12.5W)

SoftCam.key example:
I 060800 02 7F9776781329727CDBFAC7DB87F5482F; Zee TV 13°E
I 060800 04 C9B522E65EE7C496334C08CE29EB3567; Zee TV 13°E
I 060800 06 E729638106C1DFF60B687DE39294928F; Zee TV 13°E
I 060800 M2 F50B86C4FABAEAD6578B821DCA2A222E; Zee TV 13°E (ECM IV)
I 060800 M1 EEBA6DE0DE7CBE7AC52AD4925223F422; Zee TV 13°E (ECM Seed
 

Brummie

Staff member
Administrator
Messages
5,794
SKYBOX F3 recovery kit for bricked or fail boot.

Thanks to the author/s of this kit

Thanks Also to Matrix For Explaining The Howto i have just added the pics to make it easier


Instructions

MY EROM FOLDER WAS ON MY DESKTOP

1.Connect your RS232 LEAD to the SKYBOX F3

2.Now select corresponding port on the erom software.

3.Press upgrade & select the skybox f3.abs enclosed in the erom folder.

4.Switch off the SKYBOX F3 at the rear of the box.

5.Now press "NEXT" then turn the box on at the back you will now see "Com Port OK and the blue bar start to fill up"

6.The loader will now start loading slowly. (allow the firmware time to load even if it hangs at the end wait for completion and it will reboot once completed)

If it fails to start loading,turn the box off via the rear power switch & again press "NEXT" then turn the reciever back on,it may take several times before the box starts to load the firmware.

reuploaded without password
 

slugworth

Registered
Messages
336
Openbox X5 How to Boot from USB drive

Step 1: Create “recovery” folder in USB drive
Step 2: Copy KD_P9000FTA_HD.bin or KD-P9000E_HD.bin file to
the “recovery” folder of USB drive.
Cautions)
1. USB drive shall be FAT32 file format. Its doesn’t support NTFS format.
2. Only one related .bin file shall be in recovery folder.
3. Do not change the file name. If it is different, the boot from USB will not work.
Step 3: Attach the USB device to the STB via any available USB port.
Step 4: Turn power on while pressing OK key on front panel.
Step 5: Keep pressing OK key until showing “Lxxx” message on LED of front panel.
Step 6: Check TV screen that s/w is recovering(updating) by USB drive.
Step 7: The STB will restart automatically after finishing s/w recovery (update).
 

sqwonk

Registered
Messages
25
Italian language IPTV list OPENBOX x5 (eyebox X5,Q5)

Italian language IPTV list 03-04-13

OPENBOX x5 (eyebox X5,Q5)

1)Download,
2) open in text editor,
3)Delete all lines beginning with # then save as/Rename to tvlist.txt before uploading to X5 receivers.
4)Load onto clean (FAT32) USB key
5) Plug USB key into X5 Box
turn on and goto IPTV in menu -load from usb setting.
 

JAKITAKI

Super VIP
Messages
9,214
SkyBox F/M3/X3 OpenBox S9 S10 S11 S12 S16 Etc tutorial cccam install/setup

Here is the basic tutorial of how to install/insert the C Line (Cccam.cfg) MANUALLY (without USB or PC )

1 -Turn on your openbox/skybox go to network under the network go to network setup make sure the DHCP is on and click apply.
2 - under the network menu you will also see Cccam client setup go there and click ok, then go to manage config file if you are not using a usb dongle/ then go to Cccam.cfg and click Ok on the Cccam.cfg.
3 - If you get a password then try 0000 normally its without a password. once you inside the Cccam.cfg you will see the c line you had before or blank if it a new box. delete all by lcikcing red or delete only the line you want by clicking Yellow.
4 - I assume its blank if your openbox/skybox is new. now time to insert the C line. click Blue to add, you will be presented with different options.

Protocol= Cccam
Host = myhostname
Port = 12000
Usename = myusername
Password = mypassword
leave the rest as it is.
click Yellow (OK)

5 - Click Ok on the line to activate it or (Green) once is ticked press exit to save and reboot your box.
If you done everything correct your line should be online instead of offline or no active on the Cccam.cfg.
if its online then enjoy your channels if its offline check with your c line provider or check if you missed something or miss spell.
finally check if you are getting internet by going to network setup and select DHCP ON and apply.


Q/A

Q 1 my line keeps says login/offline
A 1 try another channels or ask your c line provider whats happening I think this is something to do with your line therefore your internet is connected.
Q2 My box keep says offline.
A2 check your internet or the c line must be incorrect/deactive.

Q3 Cant see cccam Client setup at all do i need to install Cccam?
A3- No i don't think so, Some newer skybox/openbox with the latest firmware Cccam or other cams are hidden, press 6666 on the network menu and not network setup ( just on the main network menu before highlighting the network setup.
it should appear there or inside Cams.

You must reboot your box after you insert the c line for the first time.

by CC_share
 

JAKITAKI

Super VIP
Messages
9,214
How to install firmware and CCcam.cfg for SkyBox F3 F5, X3, X5,M5, Etc

get a USB flash drive ( any size any make) and download the file firmware.abs and save the file to your USB main root.

Turn On the SkyBox F5 or f3

1 - Press menu and go to tools.
2 - Upgrade file by USB
Upgrade mode: image file,
Upgrade file ( the file inside the USB) f5 or f5 **** .abs
keeping DBS and settings: NO ( Make sure is No )

3 - Press ok on the start.

it will load the firmware and ask you to confirm before installing new firmware.
4 - Press Ok and wait until is finished ( it will reboot and load the latest firmware with all UK channel Favorited list.)

DONE...

CCcam.cfg ( installing test line or sub line )


Now next lets connect to the internet to get the scrambled channels working ( gift )

I assume You have the CCcam.cfg saved on your USB if not get it from your dealer.


1 - press menu and go to network local setting and open network setting
2 - the Ethernet (wired cable) is green I guess so go to setup and make sure DHCP is ON then click apply. and EXIT ALL
3 - go to menu then network local setting then Go to camds setup press OK then CCcam Client Setup Press OK then Update file by USB press Ok a new box will appear press Ok on the CCcam.cfg ( tick it) or add then Yellow for ( read ) then reboot and DONE..
4 - again go to manage config file then CCcam.cfg and open it now you will ghave the line there if you are not connected it will say offline if its connected it will say online.

Once its says online channel should work. Try youtube and see if you can load any video.

by CCcam
 

JAKITAKI

Super VIP
Messages
9,214
Openbox X5 recovery

Because the original recovery sticky is now closed I think this should be made in
to a sticky the Openbox X5 is slowly becoming popular, the work is not mine but
still a good guide to share.

[Guide] How to boot X5 from USB

(boot X5 from USB= upgrade X5 by RS232 port )


If your receiver is dead or can not turn on ( have light on panel, but can not work), can have a try to boot X5 from USB:


Booting from USB-Drive

1.- Create “recovery” folder in USB drive

2.- Copy KD_P9000E_HD.bin file to the “recovery” folder of USB* drive.

3.- Attach the USB device to the STB via any available USB port.

4.- Turn power on while pressing OK key on front panel.

5.- Keep pressing OK key until showing “L***” message on LED of front panel.

6.- Check TV screen that s/w is recovering(updating) by USB drive.

7.- The STB will restart automatically after finishing s/w recovery (update).



* USB drive shall be FAT32 file format. Its doesn’t support NTFS format, only one related .bin file shall be in recovery folder, do not change the file name. If it is different, the boot from USB will not work.
 

JAKITAKI

Super VIP
Messages
9,214
IPTV List for Openbox X5/X5 Super

A. Copy the list txlist.rar to your PC, then uncompress to txlist.txt and save in your USB memory;
B. Put USB into X5/ X5 Super;
C. Go to Main Menu, enter " Internet TV " , Press " OK " in remote controller, Then into IPTV Menu;
D. Press" OK " again, it will show IPTV List .
 

JAKITAKI

Super VIP
Messages
9,214
Openbox X5 Improved Internet Sharing
Function & its Operation


CCcam Client Setup/Mgcamd Plug Setup & Access key

Cccam.cfg for CCcam

New_Server_CCCam.gif


What changed?
1. Removed BLUE key for connect
due to no more required.
2. Simplified to connect server
pressing just OK key. It became
available to newly add the
permanent server connection
module in background.

Newcamd.list for MGcamd

New_Server_Newcamd.gif


What changed?
1. Removed BLUE key for connect
due to no more required.
2. Simplified to connect server
pressing just OK key. It became
available to newly add the
permanent server connection
module in background.

System Connection Recovery

New_Server_Connection_Recovery.gif


What changed?
1. Removed POPUP message
regarding server connection due to
no more required.
2. Removed Video Stop when active
due to connection is done in
background and so it is not
required.



Note) Server connection is now working in background unlike foreground
working in previous. This affects all systems stabilities.
 

JAKITAKI

Super VIP
Messages
9,214
Openbox X5 Recovery Guide Boot This loader supports updating via the RS232 port, even if broken bootloader.

1. Make sure that the receiver is disconnected from the power supply (via the switch on the rear panel) and connected to a computer via an RS232 port.
2. Download the boot loader and the latest software
3. Unpack the archive UARTLOADER.zip at any place
4. Change the name of the software on rom.bin and place the file in the unzipped folder UARTLOADER, where file ConsoleDown v1.3.3.11.exe
5. Opening the file with notepad ConsoleDown.bat you will see the default settings - "ConsoleDown_v1.3.3.11.exe-f. \ Rom.bin-c 3-i 1512-b 115200 \ n pause".
You need to change the "-c 3" which is the number of COM ports in your system. Set the desired number of the COM port. The default is No. 3.
6. After confirming the settings, save the file. Then run the modified file ConsoleDown.bat.

When properly configured, the window will look like this:

Snap2.jpg


7. Turn on the receiver. Screen should look like this:

Snap3.jpg


9. If, within 10 seconds, nothing changes then restart your receiver.
10. If a successful connection will transfer the data and write flash memory in the receiver. With a successful recording, the program will display the following:

Snap4.jpg


11. Restart the receiver after the successful completion of the procedure of firmware.
12. When an error occurs, press ctrl + c to stop the program and restart the procedure.
 
Top