help

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,489
Hi mate

Have a look at this stetup guide to see if it helps you at all.

http://www.sat-universe.com/showthread.php?t=132623

If not try rebooting all your kit router, pc and dreambox then lower your firewall and try to connect.

Are you see 3 green lines on the Network page? If not which lines are red.

Ferret
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,489
nothing working

We need a bit more info mate!

Are you using a router of hub? Do you have any green lines at all in DCC?

Have you searched for you IP's with DCC's IP search?

Ferret
 

Naax

Registered
Messages
6
Hello i need some help!
I ham using a router i have all the 3 green lines!
but i still cannot get to the Dreambox!
I am not sure of the login and pass
 

thomaz

Registered
Messages
224
login root password dreambox make sure you have no firewall blocking it drop you firewall see if this helps :thum:
 

thomaz

Registered
Messages
224
Download DCC from the Dreambox Utils thread and unpack it.

Run the DCC.exe file and you will arrive at the conifig screen shown below:



1. Change the language to English.
2. Enter the ip address of your pc, your dreambox and your router if applicable.
3. Enter the username and password for the dreambox (usually 'root' and 'dreambox').
4. Hit the 'Reconnect' button and the lines between the various devices should turn green.

You may have to allow DCC access through any firewalls that you are running.
If all goes to plan, you should now have a network connection from your PC to your Dreambox and the fun can begin !
 
Last edited:

Naax

Registered
Messages
6
thomaz!
well i did disactivate firewall on my pc!
and i've tried to reconnect but the problem persists!
Bootmanager not found
ftp connected telnet not
 
Last edited:

thomaz

Registered
Messages
224
TRY AND PRESS FTP in the bottom right hand coner see if you can file tranfar:thum::thum: if not try and find another dcc from someware else to down load and try that as some software plays up
 

koma123

Registered
Messages
4
hawe you trie to reflash yor box with com cable and flashwisardpro. may bee thare is som probem with yaur box fw
 

koma123

Registered
Messages
4
may bee the password orr login is wrong

You can reset your dreambox password using dreambox remote:

1.install tuxbox commander using addons button
2. Start tuxboxcomander
3.go to in /var/etc/ and open the file passwd
4.press 4 on remote to go into edit mode.
The first line is root:*****:0:0:root:/home/root:/bin/sh
where the ****** delete it (by using remote arrows to move cursor right and then pressing volume minus)
delete *** until upto :0:0:root

and press ok and exit -> save

the first line should look like this after the edit
root::0:0:root:/home/root:/bin/sh

then login with user root and password leave empty

you could telnet and change the empty password with your own so known can easily hack into your dm box.
 

Ferret

Marching On Together !
Staff member
Administrator
Messages
17,489
thomaz!
well i did disactivate firewall on my pc!
and i've tried to reconnect but the problem persists!
Bootmanager not found
ftp connected telnet not

Bootmanger not found is not a problem on a 500.

Have you checked that you password is correct and do you have 3 green lines on the network page. If not do you have any green line if so to what!

Ferret
 
Top