STILL CAN GET JSC SPORTS WORKING WITH MGCAMD

you have to use one of the ppc-files of MG1.38 c(jsc patch) outa the files section!
which one makes no difference for JSC!

Any version of mgcamd 1.38c for GP 3

Hi thanks for the help. I try many cams but i dont have luck, even RaI 4 I cant watch. I will try another time.

please help for a couple of days trying to activate mgcamd 1:38 JSC but not opening .When from hacksat install the addon does not open bul neither orf itd.Ovaj CVETKOV opens bul, orf .. but no jsc no matter what to get the keys directly from the downloader and I know they are correct because when copied to oscam YMODEM JSC works.I have dm 500s e1 gemini470

so i think wrong binary or wrong keyformaat for MGcamd!

I finally installed mgcamd 1.38c on my DE 800se via tuner (2 x blue button and choose "manual install")from post 29, posted by Bellof. Then I delated mgcamd 1.38 from tuner, and ... I still dont have AJ from 13e. I have viacess canal, cryptoworks and other,s but on the AJ channels I do not even have information, that partcicular channel is decoded in EMU (I dont have any "ligt" letter - e.g. Sec, Ird, Crw, etc. on screenbar to AJ channel).
I have dream elite 4.0. image. I read that this could be the problem. Is really only chance to see AJ channel, is to chnage this image?
I have this format keys in softcam
# ******** Al J........... S............ ********
I 0626 06 26..............................
I 0626 08 29..............................
I 0626 M1 90..............................
I 0626 M2 87..............................
Thanks for everything, especially for Bellof. Really great thanks.

for me sounds like a problem with your channellist if you don´t have crypt-symbols on JSC!

how strong is your signal??ß

On screenbar from 13e, SNR i about 99-100% if I understood your question.
thanks

so maybe you try some other settings sat like vannibal or something else!

only as a test!

don´t fergot to save your sat-settings first!

I have vhannibal settings from 04.12.2012.

so that cant be the problem!

maybe really the image is the problem!
i cant say, last time i teested NewD was at their beginning (V1.0)

and that was a nice image!
no other version i tested came next to that version!

in mg_cfg under ( /var/keys)

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

Click to expand...

make sure the B value matches ur box

06 works with Vu, Gigablue and almost all mips based boxes

I solved my problem with a great help from private message from one member of this forum.
The problem was the the contents of usr/keys catalogue.
Thanks for everything, especially bellof and one member of this forum, who sent me PM.

lady said:

I solved my problem with a great help from private message from one member of this forum.
The problem was the the contents of usr/keys catalogue.
Thanks for everything, especially bellof and one member of this forum, who sent me PM.

Click to expand...

good that u solved ur problem

i think u should put the answer here (without name) so that others with similar problem would know the solution

right isenguard!

but what i won´t understand is when the prob was really B: { 06 }

and i bet that was the prob!!

and he said he installed my autoinstaller for newde and edg so that cant be the prob!

in my autoinstaller the B: { 06 } is included in mgcamd.cfg

also the right replace list!

But I still dont know what was the problem. As I wrote it was problem of contents of usr/keys catalogue which contest I all changed to new one. Please clear your problem on this forum sb surely will help You. I got a help You will certainly get a help also.

if i remember it is 00 in the original mg_cfg (default value)
i had to set the value to 06 to make it work on my solo2

to bellof

Can you share your settings (mg_cfg, replace list and ignore list) with us?

Thanks in advance

watch post 29!
you can get them outta this file!

azbox hd with firmware opensat

--------------------------------------------------------------------------------

Can u help me?
what kind of mgcamd for azbox with firmware opensat o.5308?
please