OScam giving timeout on BIss

D

delboy123

Registered
Messages
87
Over the last few weeks was having problems where I was getting a black screen on certain feeds even though correct key and shown as found in oscam log.

Reflashed DM800se and using latest OScam-EMU r11384 but now all I get for any biss feeds is a timeout. Removed everything else from oscam.server apart from emulator, and only have the correct feed key in SoftCam.Key

2017/04/18 17:10:26 72164F9C c (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000
2017/04/18 17:10:26 72164F9C c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in caPMT
2017/04/18 17:10:26 72164F9C c (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0
2017/04/18 17:10:26 72164F9C c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 0800 VPID 0200
2017/04/18 17:10:26 72164F9C c (ecm) DOUBLE CHECK FIRST CW by emulator idx 0 cpti 0
2017/04/18 17:10:26 72164F9C c (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in PMT
2017/04/18 17:10:31 72164F9C c (ecm) dvbapiuser (2600@000000/0000/0001/0B:8130CB99E255E522F51F5ADF4221D5AB): timeout (5001 ms)
 
R

Rickk

Registered
Messages
2,375
it will use the first biss key when
sid 0001 and ecm 1fff
take constant.cw
format:
constant cw file format:
2600 caid (4 digits):
000000 provid (6 digits):
0028 sid (4 digits):
0102 pmt pid (4 digits):
1fff ecm pid (4 digits)::
key (16 bytes separated by spaces)

example:
2600:000000:0028:0102:1fff::xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx

oscam server:
[reader]
label = ccw
protocol = constcw
device = /usr/keys/constant.cw
group = 10

oscam user
[account]
user = dvbapi
uniq = 3
keepalive = 1
au = 1
group = 1,10
 
K

kebien

Registered
Messages
1,329
It is using key from cache,which might be for another channel

Best way is to delete cache.
 
D

delboy123

Registered
Messages
87
Thanks for the suggestion.
Tried constant.cw instead but still getting timeouts and now key not found.
Never had a problem using just SoftCam.Key until now

2017/04/18 19:26:58 39F758EC c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 0020 VPID 0200
2017/04/18 19:26:58 78BD0D0D r (emu) Key not found: F 11FFF 00
2017/04/18 19:26:58 78BD0D0D r (emu) Key not found: F 11FFF 01
2017/04/18 19:26:58 78BD0D0D r (emu) Key not found: F 10200 00
2017/04/18 19:26:58 78BD0D0D r (emu) Key not found: F 10200 01
2017/04/18 19:26:58 78BD0D0D r (emu) Key not found: F 11010 00
2017/04/18 19:26:58 78BD0D0D r (emu) Key not found: F 11010 01
2017/04/18 19:26:58 78BD0D0D r (emu) Key not found: F 11020 00
2017/04/18 19:26:58 78BD0D0D r (emu) Key not found: F 11020 01
2017/04/18 19:26:58 78BD0D0D r (emu) Key not found: F 11FFF 00
2017/04/18 19:26:58 78BD0D0D r (emu) Key not found: F 11FFF 01
2017/04/18 19:26:58 78BD0D0D r (emu) ECM failed: Key not found
 
K

kebien

Registered
Messages
1,329
Try making a softcam.key file with only this channel key.
but do not use constant.cw,remove it.
See if oscam can see the key.

Next time post all log,from restarting oscam,it will tell us if it see the key files
 
R

Rickk

Registered
Messages
2,375
you did not take the entry from the example
it looks like this
2600:000000:0001:0020:1FFF::xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
or
2600:000000:0001:0020:1FFF:0200:xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
 
D

delboy123

Registered
Messages
87
After trying everybody's suggestions I still just got the same timeout errors.
So today I removed openpli, reflashed with openatv and everything is working perfect again.
Tested several biss and powervu feeds and all open.

What problems openpli was causing I have no idea but it's working now.

Thanks guys
 
You must log in or register to reply here.
Top