CCcam Problem with Argus Mini IP???

New SW EDISION Argus mini 2in1

I put on RS boths SW, for all with download problems on www.ichliebetv.info.... miniSD1345 for SCART and miniHD1345 HD menu (for HDMI)
Please test also other delays if e.g. 600ms doesn't work for you
But DELAY must be in range of 10-999ms

My friend this problem with c..am and s.rver fix with this? the delay you say is only for card right? no for c.am?

Hi
no this is stream delay....what we are talking about....

hi anyone hav software to allow me to view old sky card?
i'm om astra 28.2 e
edison i hav is: s/w 0600800
h/w apollo 14
loader 1.1.5
latest update jan/10/2011
panel version 02180109
thanks would appreciate any help

Hi All
I am in the same boat as Priceyder
I would like to get my dads box hooked up to the internet it's an
Edison Argus Mini
s/w 0600800
h/w apollo 14
loader 1.1.5
latest update jan/10/2011
panel version 02180109
thanks would appreciate any help he doesn't have the internet so I was going to try to get it tested in my house first then proceed
fixed dish on 28 east
as always any help greatly appreciated
Regards
D

darklordsbane said:

Hi All
I am in the same boat as Priceyder
I would like to get my dads box hooked up to the internet it's an
Edison Argus Mini
s/w 0600800
h/w apollo 14
loader 1.1.5
latest update jan/10/2011
panel version 02180109
thanks would appreciate any help he doesn't have the internet so I was going to try to get it tested in my house first then proceed
fixed dish on 28 east
as always any help greatly appreciated
Regards
D

Click to expand...

Hi, If you have EDISION Argus mini than is not possible, if you have EDISION Argus mini IP ( with RJ-45 on the back side) than is possible. Just connect with LAN cable to your router or hub and enable DHCP in receiver settings...INTERNET/Network settings, DHCP enable...
BUT I suggest you reboot receiver than...

Hi Oven
I'm not sure if it's a mini or a mini ip but it has an internet connection and when I plug it in it find the ip address sub mask gateway etc but I cannot seem to find any access to server menus how do you get to the server settings

Ok Guys
when I click on http auto upgrade it has 2 files Argus mini ip abs and Argus mini ip alt vers, I haven't done anything to them they are dated march 2013
when I go to ftp it shows
Edison server
ftp 192. etc etc
user name ****
password****
if I press the red button to connect it says failed.
I'm not bothered about that
but am wondering will this box allow me to do cccam and if so where do I put my line info
Any help greatly appreciated
Regards
D

Hi,
you need patch software with EMU support..find it herehttp://www.sat-soft.net/
Than you will have access to all menus like Server/Client etc...it support home sharing Homecamd 1.0 nad 2.0 ( mac address) Cccamd, newcamd, nasscam (spcs) etc....
Shure it support Cccam... ( find in Client menu and add your cccam server, max 8. servers...)
Working great.
Regards

Hi Oven
Thank you very much for getting back to me there are several option do you know which 1 I should use
also I assume I put it on a usb stick and update it from there or do I use a null modem cable I have both
is it this link
http://www.sat-soft.net/index.php/16-argus-mini-2in1-2in1-ip-sat-sat-ip-t
and then this
http://www.sat-soft.net/index.php/16-argus-mini-2in1-2in1-ip-sat-sat-ip-t/35-software

regards
D

inserire FTP

Ciao Forno sono nuovo come posso collegare argus mini 2 ip in rete .
Cortesemente hai procedura grazie.