Fransat HD card

C

crocu

Registered
Messages
12
Hello

I've set Oscam with the settings to decode Fransat HD card as described in Motogato's post.

The 'V' viaccess icon turns green when i trying to display a TNT channel from Eutelsat, but screen stays black (no image)

Is it a AES key problem or it is due to my old Dreambox 7000 what should not be able to display the channel in HD ?


Many thanks
 
C

crocu

Registered
Messages
12
Yes, i know.
Fransat is indeed on 5°W Eutelsat. (Atlantic bird)
Fransat broadcasts France TNT channels on it.

It looks that Oscam is able to read my FRANSAT HD card, Viaccess 'V' is green but screen is black.

I don't know what is wrong even my Dreambox 7000 is too old to display these channels.

Do you have an idea ?
 
M

magictails

Registered
Messages
428
hi

with Db 7000 only mpeg2 SD channel ok no mpeg4 HD channel

and no AC3+ decoding only video no sound

but all channel of fransat are on 19E
by tntsat ;csat ,orange sat ;

& bisTv on 13E

@ +
 
L

littlegreg

Registered
Messages
10
Hello,
I don't have physical access to my friend DreamBox 8k which isn't at this time connected to the "right" satelite. I don't know if the settings in oscam is right :
Code: 
2015/10/08 22:26:44 2741242A h   (reader) Fransat [viaccess] creating thread for device /dev/sci0
2015/10/08 22:26:44 6BBEACB3 r   (reader) Fransat [viaccess] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/10/08 22:26:44 6BBEACB3 r   (reader) Fransat [viaccess] Reader sci internal, detected box type: dm8000
2015/10/08 22:26:44 6BBEACB3 r   (reader) Fransat [viaccess] card detected
2015/10/08 22:26:45 6BBEACB3 r   (reader) Fransat [internal] ATR: 3F ...I don't know if I can leave this here...
2015/10/08 22:26:46 6BBEACB3 r   (reader) Fransat [internal] Buffers readed  0 bytes total time_us 75183
2015/10/08 22:26:46 6BBEACB3 r   (reader) Fransat [internal] Init card protocol T0, FI=1, F=372, D=12, N=0
2015/10/08 22:26:46 6BBEACB3 r   (reader) Fransat [internal] Calculated work ETU is 6.89 us reader mhz = 450
2015/10/08 22:26:46 6BBEACB3 r   (reader) Fransat [internal] Buffers readed  0 bytes total time_us 75279
2015/10/08 22:26:46 6BBEACB3 r   (reader) Fransat [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/10/08 22:26:47 6BBEACB3 r   (reader) Fransat [internal] using ecm #711 for long viaccess ecm
2015/10/08 22:26:47 6BBEACB3 r   (reader) Fransat [internal] type: Viaccess (non-standard atr), caid: 0500, serial: ##########
2015/10/08 22:26:48 6BBEACB3 r   (reader) Fransat [internal] providers: 5 (FFF400,041950,041960,041970,041980)
2015/10/08 22:26:48 6BBEACB3 r   (reader) Fransat [internal] Maturity level [7]= older than 7 years
2015/10/08 22:26:48 6BBEACB3 r   (reader) Fransat [internal] ready for requests
2015/10/08 22:26:48 6BBEACB3 r   (reader) Fransat [internal] found card system viaccess
2015/10/08 22:26:48 6BBEACB3 r   (reader) Fransat [viaccess] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2015/10/08 22:26:48 6BBEACB3 r   (reader) Fransat [viaccess] card detected
2015/10/08 22:26:48 6BBEACB3 r   (reader) Fransat [viaccess] serial: ##########
2015/10/08 22:26:48 6BBEACB3 r   (reader) Fransat [viaccess] provider: 1, id: #####################, sa: ########, geo: empty
2015/10/08 22:26:48 6BBEACB3 r   (reader) Fransat [viaccess] provider: 2, id: ############################, sa: ########, geo: FF FF FF FF 
2015/10/08 22:26:49 6BBEACB3 r   (reader) Fransat [viaccess] provider: 3, id: ###########################, sa: ########, geo: FF FF FF FF 
2015/10/08 22:26:49 6BBEACB3 r   (reader) Fransat [viaccess] provider: 4, id: ###########################, sa: ########, geo: FF FF FF FF 
2015/10/08 22:26:49 6BBEACB3 r   (reader) Fransat [viaccess] provider: 5, id: ###########################, sa: ########, geo: FF FF FF FF 
2015/10/08 22:26:49 6BBEACB3 r   (reader) Fransat [viaccess] CA 28 initialisation failed! No boxkey or deskey!
Is a boxkey or aeskey needed ?
EDIT : I use the conf I found thanks to just4fun2 which has an aeskey by the way and oscam r11036 emu-patched.
The card is new and never got used before : shall my friend try it in the original receiver first ?
Thank you very much !
 
Last edited:
D

dmr0x

Registered
Messages
290
has aes key changed? havent viewed fransat package for months

edit. card just AU'd :)
 
Last edited:
D

DAMMM

Registered
Messages
147
gentlemen, this card is currently working 0500: 041970 on oscam?

5W Fransat HD-4K

Ask for the current oscam.server:)041970
 
Last edited:
D

dmr0x

Registered
Messages
290
regular fransat package is 041950 which includes the tnt channels + ultra hd demo works fine is oscam

041970 might be sfr package, guessing the aes key is not public so only works in ci+ cam

SFR sport inc ultra HD EPL, Rubgy and Basketball only €10 per month
 
You must log in or register to reply here.
Top