ViX Team ET6x00 Images

baha2

Super VIP
Messages
6,530
Yt1FM.png

N
ew VIX Image ET6x00 - v2.3 15/12/2011 - Open ViX 2.3
attachment.php

F
rom VIX Team

Enigma: 13-12-2011. Enigma Plugins: 13-12-2011. GCC Version: 4.4.4. Kernel Version: 3.1.0. Drivers: 2011-12-12.

This image requires the latest bootloader (attached to this post) to be flashed. This is because Xtrend have changed the way the drivers work. So, before updating your image, you will need to first flash the bootloader, then flash the new image. Flashing of new bootloader only takes a few seconds, so once flashing's completed, then just turn off the box, transfer the new image to the usb stick, and flash with that. Also, it is recommended to NOT use older images with this new boot loader, as this may result in a bricked box.


DO NOT UNPLUG POWER SUPPLY DURING BOOTLOADER OR IMAGE FLASHING! DOING SO COULD RENDER YOUR RECEIVER USELESS!

READ CAREFULLY HOW TO FLASH BOOTLOADER

Because of a lot of changes behind the scenes of the image and building, you will not be able to perform an online update. A full flash is required for this version of ViX image. However, don't forget that you can use the Backup Manager to create backups of your current settings, and then upon flashing (as long as the location you stored you backup is attached), all your settings and plugins (from feeds) will be reloaded!
This revision of the image has undergone many different builds, hours and hours of coding/fixing, and we hope that you are now happy to reflash with the latest ViX image! :D

T
eam ViX Enchancements

New Features
Updated to kernel 3.1.0 - This new kernel is much faster and better than the previous kernel, and finally you all get to test it if you held off updating to other images. If you did update, you can finally come back to the ViX image ;)
Added items to the Information Screen
- Added Devices and System Information to Menu -> Information. In Devices, you get all the information about connected devices on your box (HDD, USB and Network Shares), and System Information will show you your memory on your box (Swap, Free memory etc). See screenshots below for more information.
Added OSD Settings
- This replaces the overscan option within the ViX image. Go to Menu -> Setup -> System -> OSD -> OSD Setup, and ensure the screen fills your TV set exactly to ensure that all menu options are shown correctly for your TV.
Added support for HDMI-CEC
- This image now allows you to control your box using your tv remote. Remember, this is still experimental at the moment, and can work differently between different brands of TV makes/models.
Added uShare
- Allow the box to be detected by your DLNA devices that support this protocol. This can be configured under Menu -> Setup -> System -> Network -> uShare Setup.
Added MiniDLNA
- Same as uShare, but some people were having problems with uShare, so we have added a different version for people to use.
Added AFP
- The Apple Fileshare Protocol makes it easy for your OSX devices to find your box and use the box natively within the OS. This can be configured from Menu -> Setup -> System -> Network -> AFP Setup.
Added EPG Automatic Refresh
- This is useful for members who keep a single EPG datasource on a network share with multiple boxes. In Menu -> Setup -> System -> EPG -> Settings, you have the option to choose a network location (as long as configured within the Mount Manager). If you use this, you might want to update the EPG data from this location automatically. So now you can using the Automatic Refresh option.
Added Automounts option
- This allows the box to automatically recreate network mounts. If you've had times where the NFS of CIFS server has been restarted, or lost power etc, then you'll know that your box cannot access this network share. Well, as long as you have configured the share through the Mount Manager, then you can configure the Automount to automatically remount the share as often as you like by going to Menu -> Setup -> System -> Network -> Devices -> MountManager.
Default Skin Change
- The Default skin has been changed from ViX HD to ViX Day HD. Another ViX skin has been developed for download from the plugin server under the ViX section, called ViX Night HD. This is for those who want a darker skin for their image. See the screenshots below for comparisons between the two. Please report any skin issues you may find with the ViX Night HD skin. We think we have them all covered, but can't be too sure...
Many plugins translated/made translatable
- Allows the plugins to display correctly the information in your own language (as defined on original setup). Deleted a number of plugins - Due to the "war on licences", a number of plugins whose license has changed, has been reverted to the non-licensed version of the plugin, or had to be removed from the image indefinitely.
Added seekbar functionality to the image
- Allow you to seek within a recording playback to where you would like to be within the playback. To utilise this, please hold down the > buttons on your remote, and the seekbar will appear at the top. Use the arrow keys on the remote to choose where you would like to seek to in the playback, and press OK to start playback from this point.
Added Image Download to Image Manager
- This allows you to download the latest full image from the server, and flash it to your box (Vu Only). To access this, go to the Image Manager from with ViX menu, and press the help button. This will list all available images to download.
Added playback support for FLV files
- Now you can add FLV files to your recordings drive and play them natively within the system.
Lots more under the hood updates/enhancements
- A few menu options and screens have become more integrated to their respective menus. For example, the Recording Paths menu is no longer required, as Timeshift Path is defined in Timeshift Setup, and Recording Path in Recording Setup.

Fixes
Tweaked SoftCam manager.
Corrected a number of plugins.
Updated network components, including better support for WiFi.
Updated translatability; updated German & Dutch translations.
Hidden several ViX-core functions from the plugin-browser.
Better handling of SWAP partitions by the Mount Manager.
Tweaked TimeShift Code.
Remove SD/HD split from ChannelSelection as it was buggy.
Magic skin updates MenuSort fix.

New Features:
  • Channel Selection - Added NEXT event name and description (see screenshot).
  • Updated drivers to 20111212

Fixes:
  • ImageManager - fix image downloads.
  • Reverted inadyn to Ver:1.96
  • Fix wizard remote in ViX Skins.
  • MovieSelection - stop END showing when starting a new movie, when the previoius movie ended whilst movielist was showing.
  • Tweaked the way movie description is gathered.


B
utton Mappings
Short Red** & *** - Show current channel EPG info (ViX Single EPG).
Long Red*** - Show current event.

Short Green** & *** - Timers.

Long Green*** - AutoTimer Timers.

Short Yellow*** - EPG Search.

Long Yellow*** - IMDB Database.

Short Blue - Extensions.

Long Blue*** - Plugins Menu.

EPG - Opens ViX EPG. Left/Right** - Opens ViX QuickEPG.
Left/Right** - Opens ViX QuickEPG.
Up/Down** - Open Full Screen Channel List.
Long Up/Down** - Open Simple TV List.
TV Button** - Open Full Screen Channel List.
Long TV Button - Open Bouquets List.

** Can be changed in ViX Menu

*** Can be turned off in ViX Menu


K
nown Bugs

  • Nope
Special Thanks
  • World-of-Satellite.co.uk for providing hardware for testing release image.
  • rytec - for his continued support.
  • zoka.cc for his Picon sets
  • Coolman and all other developers for their plugins used in the feeds of this image.
  • All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working
Requests If anyone is interested in doing any translation work for the plugins and the image itself, please contact either Andy of Sicilian...

Screenshots

Information Menu:
attachment.php


About (taken from ET5000):
attachment.php


Device Information:
attachment.php


System Information:
attachment.php


OSD Setup:
attachment.php


HDMI-CEC Setup:
attachment.php


EPG Menu:
attachment.php


EPG Settings:
attachment.php



Screenshots



DO NOT UNPLUG POWER SUPPLY DURING BOOTLOADER OR IMAGE FLASHING! DOING SO COULD RENDER YOUR RECEIVER USELESS!

READ CAREFULLY HOW TO FLASH BOOTLOADER BELOW



D
ownloads


ViX-2.3.133-et6x00_usb.zip (50.64 MB)

Multiupload.com - upload your files to multiple file hosting sites!

data_et6000-bootloader-20111020.zip (250.19 KB)

Multiupload.com - upload your files to multiple file hosting sites!


ET6000 bootloader and how to upgrade

Before starting the procedure below, ensure that the USB stick is formated FAT32 and has no other files on the stick!

Preparation
1) Download the 'et6000-bootloader-20111020' file in the ET6000 menu on this website.
2) Unzip the downloaded file then 'et5000' and 'et6000' folders will be appeared.
3) Copy those two folders into the USB Medium

Insert the USB medium into either USB sockets on the front or rear panel.
Power Off and Power On the box through the powerswitch at the rear panel of the box.

After Power On, ET6000 is detecting if there is ET6000 bootloader available on the USB medium.
When the yellow/orange led shines then there is ET6000 bootloader detected.
To load the ET6000 bootloader you'll need to press the up button on the frontpanel.
When the green led will shine together with he yellow/orange led then the box is loading the bootloader.
Please be patient because it will take couple of minutes to finish upgrading.
When the yellow/orange led will disappear then the box is finished upgrading the firmware.
The box will startup automatically after the upgrade is finished.

-Warning-
During upgrading, please don't unplug power or shut down STB.
Don’t power off within 5 seconds after upgrade is completed.
The frontpanel has 3 leds: RED, GREEN, YELLOW/ORANGE

-Important Note-
Don’t upgrade the Bootloader and Firmware at the same time.
Make sure that in the USB stick only needed files for either Bootloader or Image should be contained while processing for either Bootloader upgrade or Image upgrade.
 

fushkrujs

VIP
Messages
1,123
ViX Team ET6x00 Image v2.3-153 -25/12/2011
Online Update for ET9x00 now active to bring to Build 153

Also available below is the USB File for flashing a clean build of 153

Enjoy it guys

Thanks silverfox0786


Download
 

hilton

Registered
Messages
7,622

Yt1FM.png

New VIX Image ET 6x00 Series Version 2.4

15/05/2012 - Open ViX 2.4.96

90371515231681259086.png

Fr
om VIX Team


Enigma: 04-05-2012.
Enigma Plugins: 04-05-2012.
GCC Version: 4.4.4
Vu + Kernel Version: 3.1.1
Vu+ Drivers: 2012-02-28


All Users
A full flash is required for this version of ViX image. Because of extensive changes you will not be able to perform an online update or restore any setting/plugin backups.

New Features
Blindscan
Now uses RF values in GUI not IF.
C band searches possible.
Supports symbol rates from 1 - 45MHz.

Channel Selection
Support added to change font sizes and number of rows.
Support added to have a 3rd event showing (Skin Dependent)
Support added to display start time and end time for all events shown.

EPG Selection
Added help screen to all epg selection screens.
Added support to change font sizes and number of rows.

Language Selection
Added English (UK) to available languages.

Translations
Added support for English (UK).

Sorting
You may now sort Menus, Settings and Plugin Browser alphabetically.

Network Browser
Uses less memory during Scan.
Moved to new Setup Mounts screen.
Openwebif
New style webif now accessed using default port 80
Old style webif still available if required for use with certain PC signal meters and Fancontrol 2

About Screen
Added network info.
Plugins
As part of streamlining the image, removed NFS, AFP, Samba, OpenVPN, Inadyn, MiniDLNA & uShare from default image (can now be installed/de-installed through Network setup screen)
Bootlogo's
Now available for direct install via plugins feed.

On Screen Hints
Now available as options are selected.
USB DVB
Added dvb-as102 support (by Gennart1).
Skin
Brand New skin ViXBMC by markus625 added to feeds.
Native skins updated and optimised.
Instant Record from channel list, EPG or current channel.
Enhanced Movie List Features
OLED Display Update

Latest Drivers (28/2/2012).
Loads of under the hood changes made for a smoother user experience.

Button Mappings

Short Red** & *** - Show current channel EPG info (ViX Single EPG).
Long Red ** & *** - Sort single EPG info when in channel list.

Short Green** & *** - Timers.
Long Green*** - AutoTimer Timers.
Short Yellow*** - EPG Search.
Long Yellow*** - Instant IMDB Database search on the current programme.
Short Blue - Extensions.
Long Blue*** - Plugins Menu.
EPG - Opens ViX EPG.
Left/Right** - Opens ViX QuickEPG.
Left/Right** - Opens ViX QuickEPG.
Up/Down** - Open Full Screen Channel List.
TV Button** - Open Full Screen Channel List.
Long TV Button - Open Bouquets List.
** Can be changed in ViX Menu
*** Can be turned off in ViX Menu

Special Thanks


  • rytec - for his continued support.
  • zoka.cc for his Picon sets
  • All developers for their plugins used in the feeds of this image.
  • All of the ViX Beta team for their hours of testing and dedication on getting this image working.
  • Rob van der Does, belierzz, rimas, Henkka, raivo, eesatfan, Zartmy, Trial & june8 for their translation work.
  • Silverfox0786 for channel settings, picons and bootlogo's.
  • Huevos for his work on blindscan
  • Gennart1 for dvb-as102 support
  • Markus625 for skin ViXBMC

Note: Not all 3rd party plugins have been tested or are guaranteed to be compatable.

R
equests

If anyone is interested in doing any translation work for the plugins and the image itself, please contact either Andy or Sicilian

Download

Download site for Latest Open Vix Builds (Beta's) www.openvix.co.uk

Stable release below







download
 

Haitoku

Registered
Messages
3,933
OpenViX 2.4-181 NOW ONLINE



Yt1FM.png




Code:
2.4 Build 181:
vix-core: fix image manager.
tm-twin: update drivers 20120710
vuplus: update drivers 20120628
 

hilton

Registered
Messages
7,622
OpenViX 2.4-207 NOW ONLINE​

Code:
2.4 Build 207:
pli merge
e2-plugins: merge
vix-core: remove some items from vix menu and move back to Software Manager plugin, as not everyone needs those features, Software Update has been moved to System menu.
also includes some other various unlisted minor bug fixes.

Yt1FM.png
 

Pheonix

Registered
Messages
399
ViX Team ET 6x00 OE3.0 Release


attachment.php

Brand New VIX Image ET 6x00

11/08/2012 - OpenViX
3.0.186
attachment.php

From VIX Team


GCC Version: 4.4.4
ET Kernel Version: 3.4.3
ET Drivers: 14-07-2012


All Users - A full flash is required
You can not use backup restore or online update from 2.4 with this image
In this image the core has been extensively rewritten by Andy in conjunction with the OE Alliance.
You are advised to take a
full image backup before flashing.

Features

VIX EPG
Graphics and Text mode available.
Video Playback
All EPG screens now available while watching a recording, for easy switching back to Live TV or setting timers.
Channel Selection
Support added to change font sizes and number of rows.
Support added to have a 3rd event showing (Skin Dependent)
Support added to display start time and end time for all events shown.

EPG Selection
Added help screen to all epg selection screens.
Added support to change font sizes and number of rows.

Language Selection
Added English (UK) to available languages.

Translations
Added support for English (UK).

Sorting
You may now sort Menus, Settings and Plugin Browser alphabetically.

Network Browser
Uses less memory during Scan.
Moved to new Setup Mounts screen.
Openwebif
New style webif now accessed using default port 80
Old style webif still available if required for use with certain PC signal meters and Fancontrol 2

About Screen
Added network info.
Plugins
As part of streamlining the image, removed NFS, AFP, Samba, OpenVPN, Inadyn, MiniDLNA & uShare from default image (can now be installed/de-installed through Network setup screen)
On Screen Hints
Now available as options are selected.
Instant Record
from channel list, EPG or current channel.
Enhanced Movie List Features
It is now optional to play next movie, when the a movie reaches end, setup in menu of movie selection screen.
Latest Drivers (28/6/2012).
Loads of under the hood changes made for a smoother user experience.

Button Mappings

Short Red** & *** - Show current channel EPG info (ViX Single EPG).
Long Red ** & *** - Sort single EPG info when in channel list.
Short Green** & *** - Timers.
Long Green*** - AutoTimer Timers.
Short Yellow*** - EPG Search.
Long Yellow*** - Instant IMDB Database search on the current programme.
Short Blue - Extensions.
Long Blue*** - Plugins Menu.
EPG - Opens ViX EPG.
Left/Right** - Opens ViX QuickEPG.
Left/Right** - Opens ViX QuickEPG.
Up/Down** - Open Full Screen Channel List.
TV Button** - Open Full Screen Channel List.
Long TV Button - Open Bouquets List.
** Can be changed in ViX Menu
*** Can be turned off in ViX Menu

Special Thanks


  • rytec - for his continued support.
  • zoka.cc for his Picon sets
  • All developers for their plugins used in the feeds of this image.
  • All of the ViX Beta team for their hours of testing and dedication on getting this image working.
  • Rob van der Does, belierzz, rimas, Henkka, raivo, eesatfan, Zartmy, Trial & june8 for their translation work
  • Huevos for his work on blindscan
  • Gennart1 for dvb-as102 support
  • Markus625 for skin ViXBMC

Note: Not all 3rd party plugins have been tested or are guaranteed to be compatable.

Requests
If anyone is interested in doing any translation work for the plugins and the image itself, please contact either Andy or Sicilian

Downloads

Stable release attached below

Download site for Latest Open Vix Builds (Beta's)
 

Pheonix

Registered
Messages
399
OpenViX 3.0-237​


Yt1FM.png


e2-git changelog
Code:
openvix: build 237
[epglist] fix BSOD when disabling service name in graphepg
openvix: build 236
openvix: build 235
[keymap] fix some remote buttons.
openvix: build 234
openvix: build 233
openvix: build 232
openvix: build 231
[channelselection] fix possible BSOD when trying to preview none existent service. 2nd attempt.
[channelselection] fix possible BSOD when trying to preview none existent service.
[epgselection] add options to control picon/servicename widths in graphing.
openvix: build 230
[getecminfo] fix MGcam
[epgselection] cleanup, and fix BSOD leaving single epg when opened from channel selection.
[ZapTimer] add channel to zap history and change to current service in channel selection screen.
[translations] RU remove duplicates.
[translations] RU updated thanks to 'WadimArt '
[translations] ET updated thanks to 'rimas'
Merge remote-tracking branch 'pli/master'
[epgselection] fix BSOD if no channel is currently playing when trying to exit.
openvix: build 229
InfoBar: Slightly streamline my previous path
InfoBar: Add confirmation before exit Movieplayer
openvix: build 228
openvix: build 227
openvix: build 226
openvix: build 225
dvbtime: enable transponder time sync by default
servicemp3: do not enable progressive download buffering by default
listboxservice: fix potential buffer overflows
listboxservice: fix illegal format specifiers
fix GSOD if eventView is not exist
When press exit in movieplayer also hide OSD when it is shown
Leave movieplayer on exit only when OSD is not shown
httpstream: recognise more playlist content types
[epgselection] fix exit after browsing epg without previewing.
little change in preview/zap
httpstream: add basic http authentication support
[MovieSelection] fix an issue where when browsing movie list when playing a avi/mkv on exiting movie list the current media file would restart from beginning.
httpstream: add redirect and playlist support
repair zap/prev in EPGs
openvix: build 224
openvix: build 223
servicemp3: enable GST_PLAY_FLAG_TEXT
openvix: build 222
Merge remote-tracking branch 'pli/master'
epgcache: Add a "startswith" search type and a few optimizations
[About] fix possible BSOD
servicemp3: avoid setting GST_STATE_PLAYING repeatedly when buffer hits 100%
servicemp3: only set "user-agent" property if the property exists
openvix: build 221
servicemp3: no longer put the sinks in sync mode for stream playback
servicemp3: no not respond to buffering messages for live streams
openvix: build 220
openvix: build 219
servicemp3: add progressive download buffering support for streams
ServiceInfo: Add capability to put HbbTV URL on a skin
openvix: build 218
openvix: build 217
openvix: build 216
openvix: build 215
openvix: build 214
openvix: build 213
openvix: build 212
openvix: build 211
Merge remote-tracking branch 'pli/master' (skipped all EPG related items, as they are not need for ViX)
GraphMultiEPG: Handle preview and zap correctly together with pipzap
modify string for gettext. Thanks to Dima73
openvix: build 210
openvix: build 209
openvix: build 208
openvix: build 207
cosmetics in cs.po
grade for temperature in C and F
Improved English translation
Improved Slovenian translation
Finetuning of degree sign in orbital positions
repair - do not close chanelselection
PliExtraInfo: Display degrees sign before orbital position
openvix: build 206
repair bug in zap-preview, less code
GraphMultiEPG: Highlite the current previewed service
[About] fix scrolling in NetworkInfo screen (add missing actions).
[About] fix scrolling in NetworkInfo screen.
GraphMultiEPG: Close recursive when zap is used
GraphMultiEPG: Allow to exit after zap
preview with TV button and close EPG after ZAP
preview in channelEPG and ZAP for single channelEPG
openvix: build 205
Merge remote-tracking branch 'pli/master'
[ChannelSelection] clean up after merge
[About] fix BSOD
GetEcmInfo: Try to fix stuff for mgcamd
openvix: build 204
Channelselection: Declare startRoot in the correct place
ChannelSelection: Small improvements regards previewzap
ChannelSelection: Zap back to start service regards to preview
InfobarGenerics: Remove some white spaces
[Translations] DE update thanks Ralf

oe-git changelog
Code:
openvix: build 237
openvix: build 236
[enimga2-3rdparty-feeds] buyukbangpanel fix filename.
openvix: build 235
Added 3g modem manager
Updated BuyukBangPanel
[tmtwin] dvb-modules update 20120827
update directfb to 1.4.16
openvix: build 234
openvix: build 233
[enimga2-3rdparty-feeds] fix.
openvix: build 232
[channel-settings] add ViX set.
openvix: build 231
[enimga2-3rdparty-feeds] fix.
[channel-settings] add ViX set.
[enimga2-3rdparty-feeds] fix.
Atmo link corrected (didn't match existing file)
[openhdf] removed some files from plugins
[openhdf] removed some files from plugins
Update AtmoLight
[AutoBouquets] fixed filename the architecture should be separate by a _ not a -
Merge branch 'master' of github.com:oe-alliance/oe-alliance-core
[openhdf] update build version, Softcam plugins removed
Deleted PartnerBox from the feeds, as it is no longer compatible.
openvix: build 230
vuplus-dvb-modules:20120824 update  - Improve TS playback  - Improve Graphic 2D acceleration  - Fix Russian VFD display(duo, uno)  - Fix High/low symbolrate channel scan problem.(Uno, Ultimo : Need FPGA Update) -- UNO : http://archive.vuplus.com/download/fpga/vuuno/4.5/ -- ULTIMO : http://archive.vuplus.com/download/fpga/vuultimo/4.5/  - Fix EOS detection problem in media playback  - Enhance Security  - Change duo's remote control to the advanced type(for HBBTV)
add eplayer4 source
[openhdf] removed cam-settings and various changes in bb files
openvix: build 229
[tuxbox-common] PR bump.
[tmtwin] update dvb-modules 20120825
[tuxbox] updated satellites.xml
openvix: build 228
openvix: build 227
openvix: build 226
openvix: build 225
[tmtwin] update dvb-modules 20120823:
Updated AutoBouquets; added BuyukBang
Merge branch 'master' of ssh://github.com/oe-alliance/oe-alliance-core
[openpli merge] add terratec H5 rev 3 support; Add pyload to feed; volatile-media: do not create mountpoints outside /media/
[openhdf]: image bb's edited
[openhdf]: hdf-toolbox.xx deleted
[odinsupport] add extra feed config
[openHDF] rollback to last rev from hdf-toolbox without git
[openhdf]: build 42
Merge branch 'master' of github.com:oe-alliance/oe-alliance-core
[openhdf]: various changes in plugins und build number
[odinm9] update drivers 22.08.2012
openhdf: build 36
Merge branch 'master' of github.com:oe-alliance/oe-alliance-core
[openhdf]: various changes cause of differnt enigma2 git
[openhdf]: changed to different enigma2 git
Added WebMedia
small update terrestrial.xml
[openmips,openaaf,odinsupport] switch back INHERIT += "rm_work"  not working
[openaaf] update bootlogos
Updated AutoBouquets
Added 'Modem' to the not-wanted plugins
[openaaf] bumb version
openhdf: build 22
openvix: build 224
doppeltes file gelöscht
OpenHdf: Gits als SRC_URI raus genommen
Updated PictureFS & CamoFS
openvix: build 223
[openaaf,openmips,odinsupport] use INHERIT += "rm_deepwork"
openvix: build 222
[vuplus] update dvb-modules 20120820:
[picons] switch to mirror download [picons] update 2012-08-19--11-41-11 [picons] add blue/black hd and sd picons [openaaf/odinsupport] add hddtemp to build
Updated AutoBouquets
openvix: build 221
[tmtwin] dvb-modules update 20120819
bumb build
[odinm9] remove blindscan
Bumped due to updated not-wanted-plugins-list
Added MyTube to unwanted plugins, as the license doesn't allow usage. And besides: it doesn't work.
Updated WebRadioFS & CamoFS
Added AutoBouquets E2
[openmips,openaaf,odinsupport] replace ntp with ntpdate
[dreambox] add missing tmpd
[dm800] fix dm800hd build thanks scp for testing and infos
openvix: build 220
openvix: build 219
[openhdf] stop parsing enigma2-plugin-hdf-toolbox waiting for a fix
[busybox] updated mount script.
[tmtwin] dvb-modules update 20120818
[tmtwin] linux kernel build fix.
[odinm9] drivers 18.8.2012
[ventonsupport] updated channel list
openhdf added skinsnotwanted and pluginnotwanted
openhdf: recipes initial add
OpenHDF conf file added
[tmtwin] dvb-modules update 20120817.1
openvix: build 218
openvix: build 217
openvix: build 216
openvix: build 215
[twin] linux fix checksum
[tmtwin] update machine conf
[linux-libc-headers] add version 3.5
openvix: build 214
[NTP] sync time at boot, if network available.
[ocram-picons] fix typo.
[MC] fix for usb mouse and keyboards, thanks 'Caliban'
[twin] linux kernel update to 3.5.1 fix file name.
openvix: build 213
[ocram-picons] missed include changes.
[tuxbox-common] PR bump
openvix: build 212
[ocram-picons] update package names to reflect proper recognition to the creator.
[kernel-params] remove unneeded option
[tmtwin] dvb-modules update 20120817
[twin] linux kernel fixes.
[tuxbox] updated satellites.xml
openvix: build 211
[tmtwin] dvb-modules update 20120816.1
[odinm9] drivers fix sum
[odinm9] update drivers 17.8.2012
Updated NewTube
openvix: build 210
[classes] add new deep remove work. this also removes 'package' and 'packages-split' folders.
Added GoogleNewsReader
openvix: build 209
openvix: build 208
[tmtwin] dvb-modules update 20120816
openvix: build 207
openvix: build 206
[rtl871x] fix typo.
[twin] linux kernel config update for linux 3.5.1
[kernel-params] Slab allocation optimised value
[twin] linux kernel update to 3.5.1 and dvb-modules updated.
[rtl871x] PR bump
Revert "[rtl871x] fix patch line endings."
openvix: build 205
[rtl871x] fix patch line endings.
[oe-alliance-feeds] fix and cleanup.
Added Google News Reader and Screengrab; updated LiveFootball
add transmission to feed
fix CRLF patch
add fixed patch file
fix remove corrupt patch file
openvix: build 204
[tuxbox-common] PR bump
[tuxbox] updated satellites.xml
[gb800xx] update drivers 14.08.2012 [gb800xx] add eof file fix kernel patch
fix set version disto PREFERRED wpa version

10sterne271.png
 

Pheonix

Registered
Messages
399

OpenViX 3.0-240 ONLINE UPDATE AVAILABLE​


Yt1FM.png


e2-git changelog
Code:
no changes to list.

oe-git changelog
Code:
openvix: build 240
[tmtwin] dvb-modules update 20120829
[tmtwin] linux update
openvix: build 239
[open4d] as basic support
openvix: build 238
[oe-alliance-plugins] add AutoBouquets
[enimga2-3rdparty-feeds] remove AutoBouquets as now part of oe-alliance-plugins
[odinm9] update drivers

10sterne271.png


 

Pheonix

Registered
Messages
399

OpenViX 3.0-240 ONLINE UPDATE AVAILABLE​


Yt1FM.png


e2-git changelog
Code:
no changes to list.

oe-git changelog
Code:
openvix: build 240
[tmtwin] dvb-modules update 20120829
[tmtwin] linux update
openvix: build 239
[open4d] as basic support
openvix: build 238
[oe-alliance-plugins] add AutoBouquets
[enimga2-3rdparty-feeds] remove AutoBouquets as now part of oe-alliance-plugins
[odinm9] update drivers

10sterne271.png


 

Pheonix

Registered
Messages
399

OpenViX 3.0-249 AVAILABLE NOW​


Yt1FM.png


e2-git changelog
Code:
openvix: build 249
openvix: build 248
openvix: build 247
[about] another try to fix possible BSOD, another try
[about] another try to fix possible BSOD
openvix: build 246
openvix: build 245
[graphepg] fix possible BSOD.
openvix: build 244
openvix: build 243
[translations] NL update thanks Rob
Merge remote-tracking branch 'pli/master'
po file update
use pgettext for ambiguous translations
Revert "NextEpgInfo: See the previous commit - for translations"
Revert "NextEpgInfo: Fix a typo"
Revert "EventName: Make Now Next better translatable"
add pgettext support
openvix: build 242
[about] fix possible BSOD
Merge remote-tracking branch 'pli/master'
eDVBTSRecorder: increase demux buffer size to 1MB
openvix: build 241
epgcache: advise epg.dat POSIX_FADV_DONTNEED after reading
pvrparse: open .sc file O_WRONLY
pvrparse: cosmetic, fix debug message
remove obsolete BYTE_ORDER stuff
eRawFile: mark old data POSIX_FADV_DONTNEED
rewrite eDVBRecordFileThread flushing strategy
do not use POSIX_FADV_RANDOM for an O_WRONLY file
use posix_fadvise, instead of using syscalls directly

oe-git changelog
Code:
openvix: build 249
openvix: build 248
openvix: build 247
[tmtwin] linux update 20120831.1 2nd update.
[tmtwin] dvb-modules update 20120831 2nd update
[openmips] update bootlogo
openvix: build 246
DVB-T2 support, mkv, wav fix, timeshift fix
[tmtwin] linux update 20120831
[tmtwin] dvb-modules update 20120831
[enimga2-3rdparty-feeds] try to clean current feed before updating.
openvix: build 245
[oe-alliance-plugins AutoBouquets, fix depends.
[enimga2-3rdparty-feeds] update enigma2-plugin-extensions-subtitleplayer to version 3.20
openvix: build 244
openvix: build 243
[enimga2-3rdparty-feeds] remove 'enigma2-plugin-systemplugins-pipservicerelation'
openvix: build 242
ventonsupport Some updates
openvix: build 241
[ntp] update so init.d script only gets install in ntpdate package
Fixed yampmusicplayer depends
[gigablue] update dvb-modules 30.08.2012

10sterne271.png


images can be downloaded directly from the openvix server
or via a online update
menu> setup> software update.


 

Pheonix

Registered
Messages
399

OpenViX 3.0-255 AVAILABLE NOW​


Yt1FM.png


e2-git changelog
Code:
openvix: build 255
[feed check] update for new location.
openvix: build 254
[InfobaGenerics] increase NumberZap timeout to 5 secs.
openvix: build 253
[keymap] remove 'EXIT' button for MovePlayer
[FileList] fix possible BSOD.
[ServiceScan] stop timer if closed.
[ServiceScan] stop timer if cancel scan.
[ServiceScan] fix possible BSOD and add time-out to close completed scan window automatically after 30 seconds.
openvix: build 252
some cleanup
openvix: build 251
openvix: build 250
Merge remote-tracking branch 'pli/master'
[translations] NL update thanks Rob
UsageConfig: Instantly change Channellist when setup of it is changed
eGTable: allow number of retries to be overridden
configure.ac: restructure DREAMBOX conditionals
dvb: fix compiler warnings
[about] another try to fix possible BSOD, another try

oe-git changelog
Code:
openvix: build 255
openvix: build 254
Revert "[vuduo] add missing dvb-c tda binary"
openvix: build 253
[gbquad] remove dtsdownmix flag
[gb800xx] <gigablue-drivers-3.1.1-20120903> - fixed timeshift hang up - fixed single LNB without DiSEqC does not work 22KHz Tone
[vuduo] add missing dvb-c tda binary
[gbquad] enable gst options
openvix: build 252
fix typo openwebif
[gigablue] gb800xx driver 01.09.2012 und gbquad 01.09.2012 - changed inputdev from dreambox to gigablue - fixed timeshift hang up - fixed mediaplayer previous/next jump does not work. - fixed scrambled channel audio does not work after audio change.
[tuxbox-common] PR bump.
[openwebif] fix Ventron Box.
openvix: build 251
openvix: build 250
[dreambox] add hdmi_cec
[gigablue] dvb-c utils fix typo.
[gigablue] drivers 20120831 - fixed mp3 does not work 0~4 secs. - fixed volume dB range - fixed /proc/stb/fp/was_timer_wakeup (when wakeup from deepstandby) - added /proc/stb/fp/rtc_offset (different secs from UTC) - improve DVB-C tuner performance - support tda1002x interface for AutoScan
[gigablue] add dvb-c utils
[tuxbox] updated satellites.xml

10sterne271.png


images can be downloaded directly from the openvix server
or via a online update
menu> setup> software update.


 

Pheonix

Registered
Messages
399

OpenViX 3.0-262 AVAILABLE NOW​


Yt1FM.png


e2-git changelog
Code:
openvix: build 262
[SoftwareUpdater] add option perform a Settings Backup
openvix: build 261
fix merge issue that caused a E2 restart loop.
openvix: build 260
openvix: build 259
Merge remote-tracking branch 'pli/master'
code cleanup.
openvix: build 258
openvix: build 257
openvix: build 256


oe-git changelog
Code:
openvix: build 262
openvix: build 261
openvix: build 260
Merge branch 'master' of github.com:oe-alliance/oe-alliance-core
opensif: restore of opensif-3rdparty-plugins.bb
opensif: update description for skin adriatic
opensif: update bootlogo
Merge branch 'master' of ssh://github.com/oe-alliance/oe-alliance-core
[gigablue] add gb800solo splash.bin support  please use new cfe version september.2012 update ue and quad new lcd infos please use new cfe september.2012
openvix: build 259
openvix: build 258
openvix: build 257
[tuxbox-common] bump PR
openvix: build 256
opensif: remove task-openplugins in opensif-feeds (it's a duplicate)
Initial commit for opensif image
Add libsocket recipe
[dreambox] update linux to patchlevel 28
[tuxbox] updated satellites.xml
[tuxbox

10sterne271.png


images can be downloaded directly from the openvix server
or via a online update
menu> setup> software update.


 

Pheonix

Registered
Messages
399

OpenViX 3.0-264 AVAILABLE NOW​


Yt1FM.png


e2-git changelog
Code:
openvix: build 264
Revert "revert removal of softcam settings."
revert removal of softcam settings.
Add flag for invisibles services
[TaskView] added the ability to control afterEvent as opening.
[SoftwareUpdate] add options for performing automatic Setting/Image Backups. Setting backup is now performed on update as default.
Merge remote-tracking branch 'pli/master'
ChannelSelection: Better fix for GSOD when stream is playing
ChannelSelection: Avoid GSOD when going to satellite bouquet list
InfoBarGenerics: Alternative numbering stay in same bouquet
openvix: build 263
[translations] NL


oe-git changelog
Code:
openvix: build 264
[openmips] add samba and nfs to image build
[openaaf] update bootlogo
[odin] update drivers to 07.09.2012
[ocram-picons] move over to git
[gigablue] update bootlogo
[venton-drivers]Fixed Tuner C, Improved timeshift, improved rrw,ffr, improved recording and pip
adding tuncay kabledeutschland and combo settings
openvix: build 263

10sterne271.png


images can be downloaded directly from the openvix server
or via a online update
menu> setup> software update.

or via a telnet session with the following command

init 4 && opkg update && opkg upgrade && init 6

 

Pheonix

Registered
Messages
399

OpenViX 3.0-268 AVAILABLE NOW​


Yt1FM.png


e2-git changelog
Code:
openvix: build 268
[EPGSearch] add support to search for currently playing media file.
openvix: build 267
openvix: build 266
Merge remote-tracking branch 'pli/master'
[SoftwareUpdate] fix possible BSOD
[SoftwareUpdate] fix the package count.
InputDeviceSetup: add option to select what type of remote control to use ( on supported platforms only )
[Translations] DE update thanks Ralf.
Merge remote-tracking branch 'pli/master'
fastscan: do not store the default audio pid in the cache
servicedvb: fix audio pid cache entry
cahandler: cache PMT sections
openvix: build 265
true item's number in movielist
[translations] nl update
MovieList: Autotagger collects sentence parts
PliExtraInfo: use evNewProgramInfo to determine when to read FEdata ( we can asume zap is finalized on this event )
servicedvb: add new event evNewProgramInfo
PliExtrainfo: don't update FEdata on iPlayableService.evUpdatedInfo
frontend: do not attempt to read tuner status while tuning
eDVBFrontend::getFrontendStatus: reduce the number of syscalls
frontend: get rid of duplicate frontendinfo enums
MovieSelection: Simplify playlist handling
HdmiCec: add wakeup on 'TV physical address report' option
HdmiCec: wakeup on 'activity' should ignore standby command


oe-git changelog
Code:
openvix: build 268
openvix: build 267
Merge branch 'master' of github.com:oe-alliance/oe-alliance-core
openvix: build 266
update usb-modeswitch to 1.2.4  the version 1.2.3 is down
[gigablue] update driver gb800 and gbquad to 10.09.2012
[gigablue] temp bump PV to revert old drivers.
[dreambox] add missing modules
remove 'OPENPLI_FEATURES' as it should not be used in oe-alliance.
fix Dreambox image build, add fan control for DM800se, add dtsdownmix lib, add dvd feature for dm7020hd and dm8000
dvb-c blindscan utils missing in image
openvix: build 265
[gigablue] push build drivers
[ocram-picons] remove packages, as he now supplies a feed.
[gigablue 800] on request rollback drivers to 31.08.2012
[openaaf] remove vps from image build

10sterne271.png


images can be downloaded directly from the openvix server
or via a online update
menu> setup> software update.

or via a telnet session with the following command

init 4 && opkg update && opkg upgrade && init 6

 

hilton

Registered
Messages
7,622

OpenViX 3.0-275 AVAILABLE NOW​


Yt1FM.png


e2-git changelog
Code:
openvix: build 275
openvix: build 274
Merge remote-tracking branch 'pli/master'
Merge branch 'master' of github.com:OpenViX/enigma2
Merge remote-tracking branch 'pli/master'
openvix: build 273
InfoBarGenerics: Add Service Names to NumberZap
openvix: build 272
[MovieTags] update for better detection.
Setup.xml: fixed some incorrect wordings
openvix: build 271
Merge remote-tracking branch 'pli/master'
Videomode: Add config descriptions
Another small language fixes in setup.xml
Add descriptions to the recordings configuration
Use description instead of summary for configs settings
openvix: build 270
[translation fix ET po file.
openvix: build 269
Merge remote-tracking branch 'pli/master'
[HardwareInfo] fix for GigaBlue hdmi detection.
[translations] et update (thanks Rimas)
[translations] nl update
cahandler: compare pmt crc to decide whether an update is required
Setup.py: Fix GSOD at least for timezone setup
cahandler: do not clear pmtCache while we have 500 entries or less
cahandler: fix pmtCache refcounting
Add summary description to setup screen


oe-git changelog
Code:
openvix: build 275
openvix: build 274
openvix: build 273
openvix: build 272
openvix: build 271
[openhdf] updated build, version various changes
openvix: build 270
openvix: build 269
[OpenWebIf] update box images.
[gbquad] add vfdcontrol plugin (needed to set the rtc_offset)
[plugins not wanted] remotecontrolchannel
[added] Het Weer

10sterne271.png


images can be downloaded directly from the openvix server
or via a online update
menu> setup> software update.

or via a telnet session with the following command

init 4 && opkg update && opkg upgrade && init 6

 

Pheonix

Registered
Messages
399

OpenViX 3.0-294 AVAILABLE NOW​


Yt1FM.png


e2-git changelog
Code:
openvix: build 294
openvix: build 293
openvix: build 292
openvix: build 291
openvix: build 290
openvix: build 289
openvix: build 288
fix Sundtek Tuner issues.
[Translations] ET updated thanks Rimas.
openvix: build 287
openvix: build 286
openvix: build 285
openvix: build 284
openvix: build 283
[ScanSetup] add red green labels.
Reverted last commit as a temporary fix for a bug. Buttons have to be added again (in the proper way).
[translations] nl update (reverse-merged from commit 7511b454bc2bca1364f29661ca5d2222a6adcfa4)
[translations] nl update
[translations] nl update
openvix: build 282
[translations] updated po files.
openvix: build 281
[translations] updated po files.
fix some typo's
openvix: build 280
[Language Selection.] add red green labels.
[SatConfig & ScanSetup] add red green labels.
[MessageBox] set default to False.
menu's, more menu tweaks.
[SkinSelector] add green for 'Save'
[NetworkAdapterSetup] add green button for 'Save' [NameServerSetup] add green button for 'Save', move remove to Blue, and Add to yellow
[SleepTimer] update screen
[Translations] DE updated thanks Ralf.
openvix: build 279
openvix: build 278
Merge remote-tracking branch 'pli/master'
Merge branch 'master' of github.com:OpenViX/enigma2
Merge remote-tracking branch 'pli/master'
openvix: build 277
InfoBarGenerics: Avoid GSOD for plugins that use NumberZap
Move channelselection and zap related configuration options...
[MovieSelection] tweak menu order and add support for TAGS skin screen 'MovieListTags'.
openvix: build 276
Language: use UTF-8 encoding for LC_TIME
hdmi_cec: remove duplicated conditional code
hdmi_cec: use (fixed) devicetype 3 for DREAMBOX
[ChannelSelection] move some menu items.
Merge remote-tracking branch 'pli/master'
[InfoBarGenerics] fix merge error.
[TimerEntry] add support to move HelpWindow
MovieSelection: Put default on radio button the tags
[MovieSelection] change 'RADIO' button default action to show tags.


oe-git changelog
Code:
openvix: build 294
openvix: build 293
[technomate] fix driver KV version.
attempt to fix distro 3rd party plugins build order.
[openaaf] [openmips] remove 3rdparty plugins from build to fix build errors
[gb800xx] Update drivers 18.9.2012 - fixed timer when play video - added mouse interface
openvix: build 292
[gbquad] update drivers 18.09.2012 -- wifi virtualkeyboard -- motor pnp on change sat.
[gbquad] fix module load
fix wifi legacy for kernel 2.6.37
openvix: build 291
[gbquad] enable wifi legacy
[RecInfoBar]Corrected update
[RecInfoBar] Update
[RecInfoBar] Update
openvix: build 290
add mirror's to layer.conf
fix build 3rdparty-plugins for dm7020hd
[openvix-version-info] remove the git log creation as it is now handled by the enigma2.bb
[enimga2] install git log into /etc, can be used to show changes.
[oe-aalliance-settings] add 'enigma2' as DEPENDS
don't create e2 git log if git has not been cloned
openvix: build 289
openvix: build 288
[technomate] update linux kernel to 3.5.3 and add new driver for it.
[qtwebkit] fix parrelle builds.
update 3rdparty plugins
[openmips] add new default skin
[3rd-party plugins] added RecInfoBar
update 3rdparty plugins
[openaaf] updates
openvix: build 287
openvix: build 286
[oe-alliance] layer add support for new recipes-distro folder.
openvix: build 285
[odinm9] update driver 13.9.2012
openvix: build 284
[enigma2oe-alliance-plugins] fix description for  webbrowser
[distros] move into new folder. to tidy up main folder.
Merge branch 'master' of ssh://github.com/oe-alliance/oe-alliance-core
add webkit infos to all distos
[enigma2oe-alliance-plugins] tweak bb for webbrowser
[gb800xx] update drivers 14.9.2012 - fixed >16:9 content as - added /proc/stb/video/zapmode - fixed Videoformat, /proc/stb/vmpeg/0/aspect
[gbquad] fix typo webbrowser-utils
[openmips] fix typo
openvix: build 283
add depends webbrowser plugins
[qbquad] add webbrowser plugin to image build
[gbquad] fix webkit
[openmips] add browser to image build
add webbrowser-utils for qtwebkit part 3
openvix: build 282
openvix: build 281
import qtwebkit part 2
[gbquad] update drivers 14.9.2012 - fixed >16:9 aspect ratio - added /proc/stb/video/zapmode - added grab interface for gigablue [gb800xx] bump
[openaaf] fix last commit
first import for support qtwebkit
openvix: build 280
add new enigma2 pug in to allow user to install ntfs-3g from feeds.
[gigablue] add gbmodel for se and solo + cleanup ddbootup
openvix: build 279
[3rdparty-plugins] fix bitbake.
[gbquard] fix image depends.
openvix: build 278
[tuxbox-common] PR bump
ext4 to module, jbd to module, ntfs rw enable
[tuxbox] Update satellites.xml
openvix: build 277
[WEB-Media] Update
openvix: build 276
Bump

10sterne271.png


images can be downloaded directly from the openvix server
or via a online update
menu> setup> software update.

or via a telnet session with the following command

init 4 && opkg update && opkg upgrade && init 6

 

hilton

Registered
Messages
7,622

OpenViX 3.0-316 AVAILABLE NOW​



Yt1FM.png



openvix-3.0.316

10sterne271.png


images can be downloaded directly from the openvix server
or via a online update
menu> setup> software update.

or via a telnet session with the following command

init 4 && opkg update && opkg upgrade && init 6

 
Top