DM820HD and MGcamd?

MichalSatUN

Registered
Messages
17
Hi every body,
I have a simple ( and maybe stupid ) question:

Does the box DM820HD with (original Drembox OS + Gemini Project 3.3.plugin) support CS with MGcamd at all?

Is there anybody, who got the new generation box DM820 (or DM 7080, or DM525) and use it with the MGcamd EMU?.

I am asking because this box (DM820) is working for me with the CCcam 2.3.0 + 3x Clines fine, but I couldn't make it to work with the MGcamd, which I need for Bulsatcom (39E).

Maybe I should try with a differed Image?

Who has experience and can help, please....
 

MichalSatUN

Registered
Messages
17
Oscam emu is a better solution.
Thank you!
Have you tested Oscaam for Bulsatcom (39E)?
If yes, what would be the config files for Oscam?
I see that you are using DM 7080 Merlin4, but what about Dream OS+GP3.3?
 
Last edited:

MichalSatUN

Registered
Messages
17
Thank you, I will try right now.
Still not sure where to download the config files for oscam?
I checked the gp3 feed and see there a package "gp-conf-oscam", but is this enough?
For the Mgcamd I had to download the configs from some were else.
Thank you for your time
 

MichalSatUN

Registered
Messages
17
DM820HD and OScam

Good Morning,
I worked hard last night, but still no success
Obviously,I have not enough knowledge and routine to do this job -edit oscam config files.
As a last chance I would attached my etc/tuxbox/config-files.
Would you spend some time and edit what necessary is?
Please..
Here are my Clines:
C: aa.bb.cc.ddd ppppp uuuuuuuuu pppp
C: ee.ff.gg.hh ppppp uuuuuuuuu pppp

I am not allowed to attach *.zip,
so here are the three important config file ( as per my opinion):
1.etc/tuxbox/config-oscam.conf:
#
# main configuration
#

[global]
#nice = -1
#WaitForCards = 1

# logging

#logfile = /var/log/oscam/oscam.log
#usrfile = /var/log/oscam/oscamuser.log
#cwlogdir = /var/log/oscam/cw

# monitor

[monitor]
#port = 988
#aulow = 120
#monlevel = 1

# web interface

[webif]
#httpport = 8888
#httpuser = myusername
#httppwd = mypassword

# anti-cascading

[anticasc]
#enabled = 1
#numusers = 1
#sampletime = 2
#samples = 5
#penalty = 1
#aclogfile = /var/log/oscam/aclog.log
#denysamples = 9

# protocols

[newcamd]
#key = 000102030405060708090A0B0C0D
#port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF

[radegast]
#port = 20000
#user = user1
#allowed = 192.168.0.0-192.168.255.255

[cs378x]
#port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0300:FFFFFF

[cccam]
#port = 40000
#version = 1.2.3
#build = 1234
#reshare = 2

[gbox]
#hostname = host.example.com
#port = 50000
#password = password1

[serial]
#device = user2@/dev/ttyS0?delay=1&timeout=300

[dvbapi]
#enabled = 1
#user = user1
#socket = /tmp/camd.socket

2. etc/tuxbox/config-oscam.server:
#
# reader configuration
#

# serial reader

[reader]
#label = reader1
#protocol = mouse
#detect = CD
#device = /dev/ttyS0
#group = 1
#emmcache = 1,3,2
#services = services1
#caid = 0100

# USB serial reader

[reader]
#label = reader2
#protocol = mouse
#detect = CD
#device = /dev/ttyUSB0
#aeskey = 000102030405060708090A0B0C0D0E0F
#group = 2
#emmcache = 1,3,2
#services = services2
#caid = 0200

# remote newcamd reader with fallback for group 1

[reader]
#label = remote1
#protocol = newcamd
#key = 0102030405060708091011121314
#device = 192.168.0.2,66666
#user = user1
#password = password1
#group = 1
#fallback = 1

# remote camd 3.78x reader with fallback for group 2

[reader]
#label = remote2
#protocol = cs378x
#device = 192.168.0.3,23456
#user = user2
#password = password2
#group = 2
#fallback = 1

# remote gbox reader

[reader]
#label = remote3
#protocol = gbox
#mg-encrypted = D: { 192.168.0.4 { 12345 34567 { ABCD1234 { 9 9 }}}}
#group = 3
#caid = 0300

# remote CCcam reader

[reader]
#label = remote4
#protocol = cccam
#device = 192.168.0.5,45678
#user = user4
#password = password4
#group = 4
#caid = 0400
#cccversion = 1.2.34
#cccbuild = 5678

# remote radegast reader

[reader]
#label = remote5
#protocol = radegast
#device = 192.168.0.6,56789
#group = 5
#caid = 0500

# PCSC reader

[reader]
#label = mypcscreader
#protocol = pcsc
#device = 0
#aeskey = 0102030405060708090a0b0c0d0e0f10
#group = 6
#caid = 0600

# Smargo Smartreader+

[reader]
#label = mysmartreader
#protocol = smartreader
#device = 001:002
#aeskey = 0102030405060708090a0b0c0d0e0f10
#group = 7
#caid = 0700

# internal reader

[reader]
#label = myinternalreader
#protocol = internal
#device = /dev/sci0
#group = 8
#caid = 0800

# AD-Teknik AB Multiprogrammer 3.5 serial

[reader]
#label = reader9
#protocol = mp35
#detect = CD
#device = /dev/ttyS1
#group = 9
#emmcache = 1,3,2
#services = services9
#caid = 0900

# AD-Teknik AB Multiprogrammer 3.6 USB

[reader]
#label = reader10
#protocol = mp35
#detect = CD
#device = /dev/ttyUSB1
#group = 10
#emmcache = 1,3,2
#services = services10
#caid = 1000

# AD-Teknik AB USB Phoenix at 6.00 mhz

[reader]
#label = reader11
#protocol = mp35
#detect = CD
#device = /dev/ttyUSB2
#mhz = 600
#group = 11
#emmcache = 1,3,2
#services = services11
#caid = 1100

# sc8in1 reader

[reader]
#label = reader12
#protocol = sc8in1
#device = /dev/ttyUSB0:1
#group = 12
#emmcache = 1,3,2
#caid = 1200

3. etc/tuxbox/config-oscam.user:
#
# user configuration
#

# user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled

[account]
#user = user1
#pwd = password1
#monlevel = 0
#uniq = 1
#group = 1
#au = reader1
#services = services1
#betatunnel = 0300.FFFF:0100,0400.FFFF:0100
#ident = 0100:000000
#caid = 0100

# user for group 2 with monitor access, AU enabled

[account]
#user = user2
#pwd = password2
#monlevel = 1
#uniq = 0
#group = 2
#au = reader2
#services = services2
#ident = 0200:000000
#caid = 0200

# user for group 2 without monitor access, AU disabled, account disabled

[account]
#user = user3
#pwd = password3
#disabled = 1
#group = 2
#services = services2
#ident = 0200:000000
#caid = 0200

# user for group 3 without monitor access, only one connection possible, AU disabled, multiple idents

[account]
#user = user4
#pwd = password4
#monlevel = 0
#uniq = 1
#group = 3
#ident = 0300:000000,FFFFFF;0400:FFFFFF
#caid = 0300

# user for group 5 with anti-cascading, only 1 logging allowed, send fake CWs as penalty

[account]
#user = user5
#pwd = password5
#group = 5
#services = services5
#ident = 0500:000000
#caid = 0500
#numusers = 1
#penalty = 1

Again, thank you for your time and help
 

m35istan

Registered
Messages
692
Thanks, but I don't understand.
You told me to edit the config files with the Clines, but I couldn't make it.
So, please enter the 3 Clines in those etc/tuxbox.config-files and send them back to me.
Thank you

Hi,
If you have 2 or more c line you can add oscam.server like:

C: aa.bb.cc.ddd ppppp uuuuuuuuu uuuuuuuuu
C: ee.ff.gg.hh ppppp uuuuuuuuu pppp

[reader]
label = cccam1
protocol = cccam
device = aa.bb.cc.ddd,ppppp
user = uuuuuuuuu
password = uuuuuuuuu
group = 1

[reader]
label = cccam2
protocol = cccam
device = ee.ff.gg.hh,ppppp
user = uuuuuuuuu
password = pppp
group = 1

Thanks
 

MichalSatUN

Registered
Messages
17
Hi,
If you have 2 or more c line you can add oscam.server like:

C: aa.bb.cc.ddd ppppp uuuuuuuuu uuuuuuuuu
C: ee.ff.gg.hh ppppp uuuuuuuuu pppp

[reader]
label = cccam1
protocol = cccam
device = aa.bb.cc.ddd,ppppp
user = uuuuuuuuu
password = uuuuuuuuu
group = 1

[reader]
label = cccam2
protocol = cccam
device = ee.ff.gg.hh,ppppp
user = uuuuuuuuu
password = pppp
group = 1

Thanks
Thank you M(35)istan!
And what about the other config files, like "OScam.config" and "Oscam.user"?
Don't they need some modifications?
 

MichalSatUN

Registered
Messages
17
DM820_Oscam_bulsatcom

Hi,
here is what I did to make possible opening Bulsatcom on Hellas Sat 2 (39E).

I still have the old DM800 HD PVR which do receive and open Bulsatcom with MGcamd 1.35a + 2 Clines.
I tried to transfer the settings (usr/key, usr/script, usr/bin) from the old box to the new one DM820 (currently Merlin4-GP3.3., but I also tried with Dream OS -GP3.3.), but it did not work.
I believe the problem is the MGcamd 1.35a it self, because it did not installed correctly with the One step Cam feed, neither with BP, nor with console (although I was using *.deb packages) . There was an error after each installation try and I could see in /usr/bin/ only the Mgcamd_1.35, but not the_1.35a
I also tried to rename the 1.35 to 1.35a , or exchange the content, bit it did not work either .

Any way, after long, long useless work I gave up the MGcamd 1.35a and now I am trying to open this Bulsatcom with the OScam 1.20 which I installed with the One step GP33 Cam feed.
I still have the two C lines which work on the old DM 800 box with the old MGcamd 1.35a.
Actually the sad 2 Clines work on the new DM820 too, but only with the CCcam2.3.0 which can not open the Bulsatcom (39E)-Irdeto 2.

Here are my settings for the Oscam 1.20 in /etc/tuxbox/config/.
I only changed three files: oscam.conf, oscam.server and oscam.user:
The Clines are:
C: aa.bb.cc.ddd ppppp uuuuuuuuu pppp
C: ee.ff.gg.hh ppppp uuuuuuuuu pppp

============================
oscam.conf
===============================
#
# main configuration
#

[global]
nice = -1
#WaitForCards = 1

# logging

logfile = /tmp/oscam/oscam.log
#usrfile = /var/log/oscam/oscamuser.log
#cwlogdir = /var/log/oscam/cw

# monitor

[monitor]
#port = 988
#aulow = 120
#monlevel = 1

# web interface

[webif]
#httpport = 8888
#httpuser = myusername
#httppwd = mypassword

# anti-cascading

[anticasc]
#enabled = 1
#numusers = 1
#sampletime = 2
#samples = 5
#penalty = 1
#aclogfile = /var/log/oscam/aclog.log
#denysamples = 9

# protocols

[newcamd]
#key = 000102030405060708090A0B0C0D
#port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0300:FFFFFF

[radegast]
#port = 20000
#user = user1
#allowed = 192.168.0.0-192.168.255.255

[cs378x]
#port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0300:FFFFFF

[cccam]
#port = 40000
#version = 1.2.3
#build = 1234
#reshare = 2

[gbox]
#hostname = host.example.com
#port = 50000
#password = password1

[serial]
#device = user2@/dev/ttyS0?delay=1&timeout=300

[dvbapi]
enabled = 1
user = uuuuuuuuu
#socket = /tmp/camd.socket

================================
oscam.server
===============================
.................
# remote newcamd reader with fallback for group 1

[reader]
label = remote1
protocol = newcamd
key = 0102030405060708091011121314
device = aa.bb.cc.ddd,ppppp
user = uuuuuuuuu
password = pppp
group = 1
fallback = 1

[reader]
label = remote2
protocol = newcamd
key = 0102030405060708091011121314
device = ee.ff.gg.hh,ppppp
user = uuuuuuuuu
password = pppp
group = 1
fallback = 1

...................
# remote CCcam reader

[reader]
label = remote3
protocol = cccam
device = aa.bb.cc.ddd,ppppp
user = uuuuuuuuu
password = pppp
group = 2
#caid = 0400
cccversion = 2.3.0
#cccbuild = 5678

[reader]
label = remote4
protocol = cccam
device = ee.ff.gg.hh,ppppp
user = uuuuuuuuu
password = pppp
group = 2
#caid = 0400
cccversion = 2.3.0
#cccbuild = 5678

......................
=======================
oscam.user
=====================
#
# user configuration
#

# user for group 1 with Betacrypt tunnel, no monitoring, only one connection possible, AU enabled

[account]
user = uuuuuuuuu
pwd = pppp
#monlevel = 0
#uniq = 1
group = 1
#au = reader1
#services = services1
#betatunnel = 0300.FFFF:0100,0400.FFFF:0100
#ident = 0100:000000
#caid = 0100

# user for group 2 with monitor access, AU enabled

[account]
#user = user2
#pwd = password2
#monlevel = 1
#uniq = 0
#group = 2
#au = reader2
#services = services2
#ident = 0200:000000
#caid = 0200
............................

would some body please check those files and confirm, or correct them?
Do I need to edit the other files from the /etc/tuxbox/config/ too?
Please, help me
Thank you
 
Top