Oscam configurations for powerVu channels through stream relay

ettore88

Registered
Messages
338
Hi guys.
I would need oscam configurations for the PowerVu channels through "Stream Relay" method.I have an Octagon 4008.THX in advance.;)
 

alexandrerpo

Registered
Messages
10
oscam.conf

[global]
logfile = /tmp/autoroll
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
lb_mode = 1
lb_save = 100
lb_reopen_mode = 1

[streamrelay]
stream_relay_enabled = 1


[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapi
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8888
httptpl = /usr/keys/oscam_atv_emu/
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1

Oscam.server

[reader]
label = SoftCam.Key
description = SoftCam
protocol = emu
device = /usr/keys/oscam_atv_emu/SoftCam.Key
cacheex = 2
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 2
emmcache = 2,1,2,1
lb_weight = 150
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000;2600:000000

oscam.user

[account]
description = dvbapi
user = dvbapi
au = 1
group = 1,2,3,4,5
keepalive = 1


Put in /usr/keys/oscam_atv_emu/ your softcam.key file with EMM.KEY

Create Stream Relay Channel List

http://www.sat-universe.com/showthread.php?t=285415

https://github.com/oscam-emu/oscam-emu/wiki/PowerVU-config


Autoroll works if the EMM Key is valid. If the channel does not open wait 10 minutes to open the channel.


Use in an SF4008 and stream relay works perfectly well. Our fight with Octagon is to open without stream relay because Dreambox, Vu +, Mutant open and use same processor.
Disappointed with Octagon, various defects, RAM, Without Stream Relay, Blind Scan does not work, and this makes more than 2 years of waiting.
I advise you not to buy Octagon.
 

ettore88

Registered
Messages
338
oscam.conf

[global]
logfile = /tmp/autoroll
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1
lb_mode = 1
lb_save = 100
lb_reopen_mode = 1

[streamrelay]
stream_relay_enabled = 1


[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapi
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox

[webif]
httpport = 8888
httptpl = /usr/keys/oscam_atv_emu/
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1

Oscam.server

[reader]
label = SoftCam.Key
description = SoftCam
protocol = emu
device = /usr/keys/oscam_atv_emu/SoftCam.Key
cacheex = 2
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 2
emmcache = 2,1,2,1
lb_weight = 150
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000;2600:000000

oscam.user

[account]
description = dvbapi
user = dvbapi
au = 1
group = 1,2,3,4,5
keepalive = 1


Put in /usr/keys/oscam_atv_emu/ your softcam.key file with EMM.KEY
I m8.I tried your oscam conf.Unfortunately they do not work on any encrypted channel in powerVu(streamrealy)and other channels(Swiss,Arena Sport...)Hw can i fix it?Could you give me some help?THX in advance.;)
 

technodvl2

Registered
Messages
251
config works 100 %

if you put the keya in the right place ie

device = /usr/keys/oscam_atv_emu/SoftCam.Key

and a working powervu channel list

it works
 

ettore88

Registered
Messages
338
config works 100 %

if you put the keya in the right place ie

device = /usr/keys/oscam_atv_emu/SoftCam.Key

and a working powervu channel list

it works
Hi m8.
It's what I did

zu5rmp.jpg
[/IMG]


I can't see the swiss channels,arena...and powerVu channels.Why?:confused:;)
 

alexandrerpo

Registered
Messages
10
Hi m8.Where can i find a softcam.key file with EMM.KEY?THX in advance.;)
EMM key you have to get with someone from tp sat you tune in.
Unfortunately the ones I use will not work for you.

I m8.I tried your oscam conf.Unfortunately they do not work on any encrypted channel in powerVu(streamrealy)and other channels(Swiss,Arena Sport...)Hw can i fix it?Could you give me some help?THX in advance.;)
Access the oscam Openwebif or enter the ip of your deco: 8888.
Can you access oscam?
If yes, watch the live log
 

ettore88

Registered
Messages
338
Access the oscam Openwebif or enter the ip of your deco: 8888.
Can you access oscam?
If yes, watch the live log
Hi m8.Here my logs:


2wlvxiw.jpg


The various EMUs don't work.(swiss channels,arena channels...)Why?The log is reported when I tuned into the RSI(swiss channel).The channels powerVu don't work.Hw can i fix it?THX in advance.;)
 
Top