mis peliculas

slugworth

Registered
Messages
336
30w 12092 h 30000 (americas) mis peliculas channel is listed as viaccess but is actually viaccess and powervu.
My gsky v7 just detects it as viaccess but will save the powervu emms to usb stick.Maybe somebody with a dvb card can separate the powervu part and actually watch.
 

kebien

Registered
Messages
1,329
OK
Let me clarify for you.
When Symulcrypt,the CA table in the stream is announcing the encryptions,which does not mean they are all in use.But they could be.

For you to know if is encrypted in powervu,you should see an ECM and an EMM for powervu,without those PID's present in the stream,they are no powervu,regardless what the CAT say.
This infrmtion should be present in the PMT.
So,please post a record of 2 minutes of the FULL TS of this trasponder and we can analyze it.
 

slugworth

Registered
Messages
336
I will switch over to my older receiver to record.
I was able to find keys using powervu home edition, if that makes a difference.
 

slugworth

Registered
Messages
336
stymied

forum won't let me post attachments.

You may post new threads
You may post replies
You may not post attachments
You may edit your posts
 

kebien

Registered
Messages
1,329
Ok,you have keys.
It means there is EMM
But as I said before,if there is no ECM for powervu,you won't be able to decrypt video.
Also,if there is no ECM pid listed in PMT,you won't be able to select it and decrypt either.
Upload the file to an upload site,like megauploads.
 

slugworth

Registered
Messages
336
I only have x2 or openbox receiver to record .ts.
P 0000 00 191F1B713B6777 ; ECM Key0 [Valid, via2.bin]

P 0000 01 1D1BE37186BEA0 ; ECM Key1 [Valid, via2.bin]

P 005A95D6 00 53EFDA9E2184FC ; EMM Key [Valid, via2.bin]
 

slugworth

Registered
Messages
336
please upload bin file for this tp finding ecm keys

ts file can not find powervu ecm keys

ts only work for finding biss or tandberg keys..

possible to record bin file use dvb card & v plugin...

I used gsky v7 to save 15meg of just emm to usb stick.
Ran powervu home edition 2.1.1 to get keys
 

kebien

Registered
Messages
1,329
This is not the full TS ,there is no CAT.
And there is only one program.

PMT only show viaccess
Code:
09 0F 05 00 F1 05 10 01 00 13 01 20 14 03 05 1E 20 1B E0 22 F0 00 04 E0 23 F0 00 04 E0 24 F0 00 AF CB 00 DC

As I said,if there is no powervu ECM,no way you can decrypt ,there is none in this TS.
 

slugworth

Registered
Messages
336
I tried the latest ts doctor on a 1 hour recording but the program doesn't work and says file encrypted operation aborted.
The old versions were better.
 

slugworth

Registered
Messages
336
CAT Version Number: 6
Descriptor: CA Descriptor
CA System ID: 3584 (0x0e00) Scientfic Atlanta
CA PID 90 (0x005a)
Descriptor: CA Descriptor
CA System ID: 1280 (0x0500) France Telecom
CA PID 42 (0x002a)
CA private data: 13 01 20 14 03 05 1e 20 14 03 04 27 40
 

kebien

Registered
Messages
1,329
But you still do not show there is a powervu ECM.....
You do not understand that PMT do not show a powervu ECM pid,without it,you cannot decrypt using powervu.
Is it that hard to understand?

Stop posting anything that is not THE FULL TS,because nothing of what you posted help so far.

In a symulcrypt system,all encryptions used in the transponder are listed.
This mean one service can be viaccess,and another can be powervu,or both at the same time.
If this channel were using both,the PMT should show the powervu ECM pid,but it doesn't.
Is this clear?
Powervu traces in this service must be only the remains from the time they started using powervu in satellite 55.5W.
Now they phased out to viaccess.
Or there are other programs in this trasponder that uses powervu.
But not this one.

Post the full TS,ask a friend to do it for you if you can't.
 

kebien

Registered
Messages
1,329
If I had a program to analyze I would do it myself.
I already have the ecm and emm keys.

Yes,I have keys too,from the time it showed up in 55.5W satellite.

But you still do not get some concepts.
Unless the emulator let you set manually which ECM to decrypt,overriding what the CAT say,you cannot force to do what you want.
Second,apparently,this service is not using powervu anymore,given there is no powervu ECM.
 

cpr43

Registered
Messages
268
This is just a 101 decrypt class/discussion post or a team effort to try open up Mis peliculas with different technics?? 116.8W mux used something similar conax/powervu combination and a way to open it was founded using PV technics. Cant see where this is heading??
 

slugworth

Registered
Messages
336
I will leave it up to others with dvb cards.
Just thought I would make people aware since lyngsat and other similar sites aren't always accurate on tp/channel details.
And the gsky v7 will save pvu emms to usb that you can play with.
 

slugworth

Registered
Messages
336
on a side note,teleocho 30w 11981v SR 3030 is another weird one.It comes up as caid FFFF and when I search the net for that one I get nothing.
 
Top