Spanish Abertis DTT Sat @ Hispasat 30W - Chat & How to guides

Tomek22 · Feb 5, 2019

works perfectly with my dm520 on openatv 6.2

antrabe · Feb 5, 2019

Tomek22 said:
works perfectly with my dm520 on openatv 6.2

Then should works also on dm7080 somebody has working ?

Tomek22 · Feb 5, 2019

here is screen

i found one error in this guide.
http://www.sat-universe.com/showthread.php?t=310361

not every channel work but i think i can fix it

Tomek22 · Feb 5, 2019

there is also an error in astra.conf file.

For me it started to work when i deleted those lines from astra.conf

Code:

-- Astra MOD Octagon SF 4008 OpenATV 6.3

log.set({ stdout = false, debug = false, syslog = "astra", })

[B]### ABERTIS SAT (30W) ###[/B]

after this i was able to run astra-sm from telnet and it started showing pids from abertis, and picture on tv

this helps to run this channel on dm520 openatv 6.2. On HD it started to lost packets... (low signal?) need to check.

Rickk · Feb 5, 2019

this is a good hint Tomek22
here the revised version

it would be nice to add this above and delete the old ones

i also tested it with Pure E2 = work

mouadhada · Feb 5, 2019

Here is the debug from astra sm on dm920 :
Feb 05 23:03:13: INFO: Starting Astra SM 0.2
Feb 05 23:03:24: DEBUG: [http_server 0.0.0.0:9999] client connected 127.0.0.1:9999 (1 clients)
Feb 05 23:03:25: ERROR: [Abertis PID 8001 #1] Bitrate:0Kbit/s PES:0 CC:0
Feb 05 23:03:26: ERROR: [Abertis PID 8001 #1] Bitrate:0Kbit/s PES:0 CC:0
Feb 05 23:03:27: ERROR: [Abertis PID 8001 #1] Bitrate:0Kbit/s PES:0 CC:0
Feb 05 23:03:28: ERROR: [Abertis PID 8001 #1] Bitrate:0Kbit/s PES:0 CC:0
Feb 05 23:03:28: ERROR: [Abertis PID 8001] Failed to switch to reserve
Feb 05 23:03:34: ERROR: [http_request localhost:8001/1:0:1:3E9:EA62:0:CE4B157:0:0:0:] receiving timeout
Feb 05 23:03:49: ERROR: [http_request localhost:8001/1:0:1:3E9:EA62:0:CE4B157:0:0:0:] receiving timeout

Oscam debug :
2019/02/05 23:04:55 00FBDAE7 c (ecm) dvbapiau (P: 2600::03E9:1FFF:0000 #ECM_L:11 #CW=2E4E9511A3155C142E4E9511A3155C14 HOP:00): found (1 ms) by emulator
2019/02/05 23:04:56 00FBDAE7 c (dvbapi) Demuxer 0 found 1 ECMpids and 1 STREAMpids in PMT

mouadhada · Feb 5, 2019

Can someone help to fix this issue. Oscam is picking the right key but astra sm error

mouadhada · Feb 5, 2019

I am trying to do it on DM920. It is not working but I have those logs :
eb 05 23:03:13: INFO: Starting Astra SM 0.2
Feb 05 23:03:24: DEBUG: [http_server 0.0.0.0:9999] client connected 127.0.0.1:9999 (1 clients)
Feb 05 23:03:25: ERROR: [Abertis PID 8001 #1] Bitrate:0Kbit/s PES:0 CC:0
Feb 05 23:03:26: ERROR: [Abertis PID 8001 #1] Bitrate:0Kbit/s PES:0 CC:0
Feb 05 23:03:27: ERROR: [Abertis PID 8001 #1] Bitrate:0Kbit/s PES:0 CC:0
Feb 05 23:03:28: ERROR: [Abertis PID 8001 #1] Bitrate:0Kbit/s PES:0 CC:0
Feb 05 23:03:28: ERROR: [Abertis PID 8001] Failed to switch to reserve
Feb 05 23:03:34: ERROR: [http_request localhost:8001/1:0:1:3E9:EA62:0:CE4B157:0:0:0:] receiving timeout
Feb 05 23:03:49: ERROR: [http_request localhost:8001/1:0:1:3E9:EA62:0:CE4B157:0:0:0:] receiving timeout

Oscam debug :
2019/02/05 23:04:55 00FBDAE7 c (ecm) dvbapiau (P: 2600::03E9:1FFF:0000 #ECM_L:11 #CW=2E4E9511A3155C142E4E9511A3155C14 HOP:00): found (1 ms) by emulator
2019/02/05 23:04:56 00FBDAE7 c (dvbapi) Demuxer 0 found 1 ECMpids and 1 STREAMpids in PMT

Oscam is picking the right keys but no picture

Rickk · Feb 5, 2019

that will probably not even with openatv on the dm7080 dm9xx
here someone would have to compile an astra-sm for oe2.5 and dm9xx
https://gitlab.com/crazycat69/astra-sm

Tomek22 · Feb 5, 2019

Mouadhada you sure everything is correct? You shouldnt have bitrate:0Kbit/s there must be stream. astra-sm in your dm920 doesnt see stream.

Try to run in telnet "astra --analyze http://localhost:8001/(here put link from boquet 1:0:1 to fresh scanned data channel from abertis frequency)

You should see now that this tool astra sm is analyzing stream from 11222H or 11342H.

Also check if your keys are correct.

mouadhada · Feb 5, 2019

Tomek22 said:
Mouadhada you sure everything is correct? You shouldnt have bitrate:0Kbit/s there must be stream. astra-sm in your dm920 doesnt see stream.

Try to run in telnet "astra --analyze http://localhost:8001/(here put link from boquet 1:0:1 to fresh scanned data channel from abertis frequency)

You should see now that this tool astra sm is analyzing stream from 11222H or 11342H.

Also check if your keys are correct.

As you see in oscam log, the picked key is the right one !
I will do the analyse tomorrow

mouadhada · Feb 6, 2019

Tomek22 said:
Mouadhada you sure everything is correct? You shouldnt have bitrate:0Kbit/s there must be stream. astra-sm in your dm920 doesnt see stream.

Try to run in telnet "astra --analyze http://localhost:8001/(here put link from boquet 1:0:1 to fresh scanned data channel from abertis frequency)

You should see now that this tool astra sm is analyzing stream from 11222H or 11342H.

Also check if your keys are correct.

This is what I got :
root@dm920:/etc/astra# astra --analyze http://localhost:8001/1:0:1:BD1:EA74:1:CE42BD6:0:0:0:
Feb 06 23:40:01: INFO: Starting Astra SM 0.2
Feb 06 23:40:02: INFO: Bitrate: 0 Kbit/s
Feb 06 23:40:03: INFO: Bitrate: 0 Kbit/s
Feb 06 23:40:04: INFO: Bitrate: 0 Kbit/s
Feb 06 23:40:05: INFO: Bitrate: 0 Kbit/s
Feb 06 23:40:06: INFO: Bitrate: 0 Kbit/s
Feb 06 23:40:07: INFO: Bitrate: 0 Kbit/s
Feb 06 23:40:08: INFO: Bitrate: 0 Kbit/s
Feb 06 23:40:09: INFO: Bitrate: 0 Kbit/s
Feb 06 23:40:10: INFO: Bitrate: 0 Kbit/s
Feb 06 23:40:11: ERROR: [http_request localhost:8001/1:0:1:BD1:EA74:1:CE42BD6:0:0:0:] receiving timeout
In oscam :
2019/02/06 23:40:17 74A0900F c (ecm) dvbapiau (P: 2600::0BD1:1FFF:0000 #ECM_L:11 #CW=2A1F90D961EA97E22A1F90D961EA97E2 HOP:00): found (2 ms) by emulator
2019/02/06 23:40:17 74A0900F c (dvbapi) Demuxer 0 found 1 ECMpids and 1 STREAMpids in PMT
2019/02/06 23:40:21 74A0900F c (dvbapi) Demuxer 0 stop descrambling program number 0BD1 (2600@000000:0BD1 unknown)

This my oscam.conf :
#### "*******************************************"
#### "* ..:: A U T H O R ::.. *"
#### "* << Audi06_19 **** *"
#### "* ..:: https://.......... ::.. *"
#### "*******************************************"

[global]
logfile = /tmp/oscam.log
#logfile = stdout
nice = -1
preferlocalcards = 1
block_same_ip = 0
block_same_name = 0
waitforcards = 1
ecmfmt = P: c:0p:s:d:i #ECM_L:l #CW=w HOP:j

[cache]

[streamrelay]
stream_relay_enabled = 0

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 60
ecminfo_type = 1
user = dvbapiau
read_sdt = 1
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox

[webif]
httpport = 8888
httprefresh = 10
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
http_status_log = 1

raul1966 · Feb 7, 2019

this does not work with all receivers. you should create a list with compatible receiver

robertjust · Feb 7, 2019

mouadhada said:
Here is the debug from astra sm on dm920 :
Feb 05 23:03:13: INFO: Starting Astra SM 0.2
Feb 05 23:03:24: DEBUG: [http_server 0.0.0.0:9999] client connected 127.0.0.1:9999 (1 clients)
Feb 05 23:03:25: ERROR: [Abertis PID 8001 #1] Bitrate:0Kbit/s PES:0 CC:0
Feb 05 23:03:26: ERROR: [Abertis PID 8001 #1] Bitrate:0Kbit/s PES:0 CC:0
Feb 05 23:03:27: ERROR: [Abertis PID 8001 #1] Bitrate:0Kbit/s PES:0 CC:0
Feb 05 23:03:28: ERROR: [Abertis PID 8001 #1] Bitrate:0Kbit/s PES:0 CC:0
Feb 05 23:03:28: ERROR: [Abertis PID 8001] Failed to switch to reserve
Feb 05 23:03:34: ERROR: [http_request localhost:8001/1:0:1:3E9:EA62:0:CE4B157:0:0:0:] receiving timeout
Feb 05 23:03:49: ERROR: [http_request localhost:8001/1:0:1:3E9:EA62:0:CE4B157:0:0:0:] receiving timeout

Oscam debug :
2019/02/05 23:04:55 00FBDAE7 c (ecm) dvbapiau (P: 2600::03E9:1FFF:0000 #ECM_L:11 #CW=2E4E9511A3155C142E4E9511A3155C14 HOP:00): found (1 ms) by emulator
2019/02/05 23:04:56 00FBDAE7 c (dvbapi) Demuxer 0 found 1 ECMpids and 1 STREAMpids in PMT

How do you have the debug from atra sm??

Tomek22 · Feb 7, 2019

This is what i got:

Code:

root@dm520:~# astra --analyze http://localhost:8001/1:0:1:BD1:EA74:1:CE42BD6:0:0:0:
Feb 07 16:22:09: INFO: Starting Astra SM 0.2
Feb 07 16:22:10: INFO: Bitrate: 0 Kbit/s
Feb 07 16:22:10: INFO: PAT: tsid: 60020
Feb 07 16:22:10: INFO: PAT: pid: 16 NIT
Feb 07 16:22:10: INFO: PAT: pid: 7025 PMT pnr: 3025
Feb 07 16:22:10: INFO: PAT: pid: 7026 PMT pnr: 3026
Feb 07 16:22:10: INFO: PAT: pid: 7027 PMT pnr: 3027
Feb 07 16:22:10: INFO: PAT: pid: 7028 PMT pnr: 3028
Feb 07 16:22:10: INFO: PAT: pid: 7035 PMT pnr: 3035
Feb 07 16:22:10: INFO: PAT: pid: 7036 PMT pnr: 3036
Feb 07 16:22:10: INFO: PAT: pid: 7037 PMT pnr: 3037
Feb 07 16:22:10: INFO: PAT: pid: 7038 PMT pnr: 3038
Feb 07 16:22:10: INFO: PAT: pid: 7050 PMT pnr: 3050
Feb 07 16:22:10: INFO: PAT: pid: 8100 PMT pnr: 65534
Feb 07 16:22:10: INFO: PAT: pid: 7060 PMT pnr: 3060
Feb 07 16:22:10: INFO: PAT: crc32: 0x729B4B94
Feb 07 16:22:10: INFO: PMT: pnr: 3025
Feb 07 16:22:10: INFO: PMT: pid: 8191 PCR
Feb 07 16:22:10: INFO: PMT: CAS: caid: 0x2600 pid: 8191
Feb 07 16:22:10: INFO: PMT: Service: HS125.25
Feb 07 16:22:10: INFO: PMT: Provider: HSA-125
Feb 07 16:22:10: INFO: DATA: pid: 2025 type: User private (0x90)
Feb 07 16:22:10: INFO: DATA: descriptor: 0xFB06000A00000000
Feb 07 16:22:10: INFO: DATA: descriptor: 0xFA08000A000000002000
Feb 07 16:22:10: INFO: PMT: crc32: 0x83917BE
Feb 07 16:22:11: INFO: Bitrate: 7545 Kbit/s
Feb 07 16:22:11: ERROR: CC: PID:0=1 PID:7025=1
Feb 07 16:22:11: ERROR: Scrambled: 2025=281
Feb 07 16:22:12: INFO: Bitrate: 9474 Kbit/s
Feb 07 16:22:13: INFO: Bitrate: 9474 Kbit/s
Feb 07 16:22:14: INFO: Bitrate: 9474 Kbit/s
Feb 07 16:22:15: INFO: Bitrate: 9474 Kbit/s
Feb 07 16:22:16: INFO: Bitrate: 9475 Kbit/s
Feb 07 16:22:17: INFO: Bitrate: 9474 Kbit/s
Feb 07 16:22:18: INFO: Bitrate: 9474 Kbit/s
Feb 07 16:22:19: INFO: Bitrate: 9474 Kbit/s
Feb 07 16:22:20: INFO: Bitrate: 9474 Kbit/s
Feb 07 16:22:21: INFO: Bitrate: 9474 Kbit/s
Feb 07 16:22:22: INFO: Bitrate: 11054 Kbit/s

you need to keep trying different settings to be able to analyze stream by astra-sm. If you can't analyze stream with astra-sm you can forget about making this work

lomismo · Feb 7, 2019

Hi,
Please put files oscam ( config, user,server, dvbapi etc, )

chk8210 · Feb 10, 2019

Thanks your useful explanation Rick.
I tried with Zero 4K Open ATV 6.2, works fine!
OpenPLi 7 still not ok. When I swtich to albertis channel, mesage appear: "No data in the transponder (PAT reading timeout)"

Maybe this can cause the problem?

Code:

Feb 10 11:05:05: ERROR: CC: PID:5002=1 PID:8002=1

See detail below:

Code:

root@vuzero4k:~# astra --analyze http://localhost:8001/1:0:1:3EA:EA62:0:CE4B157:
0:0:0:
Feb 10 11:05:03: INFO: Starting Astra SM 0.2
Feb 10 11:05:04: INFO: PAT: tsid: 60002
Feb 10 11:05:04: INFO: PAT: pid: 16 NIT
Feb 10 11:05:04: INFO: PAT: pid: 5001 PMT pnr: 1001
Feb 10 11:05:04: INFO: PAT: pid: 5002 PMT pnr: 1002
Feb 10 11:05:04: INFO: PAT: pid: 5003 PMT pnr: 1003
Feb 10 11:05:04: INFO: PAT: pid: 8100 PMT pnr: 65534
Feb 10 11:05:04: INFO: PAT: crc32: 0xA7B84058
Feb 10 11:05:04: INFO: Bitrate: 18481 Kbit/s
Feb 10 11:05:05: INFO: PMT: pnr: 1002
Feb 10 11:05:05: INFO: PMT: pid: 8191 PCR
Feb 10 11:05:05: INFO: PMT: CAS: caid: 0x2600 pid: 8191
Feb 10 11:05:05: INFO: PMT: Service: HSA-67.2
Feb 10 11:05:05: INFO: PMT: Provider: HSA-67
Feb 10 11:05:05: INFO: DATA: pid: 8002 type: User private (0x90)
Feb 10 11:05:05: INFO: DATA: descriptor: 0xFB06000100000000
Feb 10 11:05:05: INFO: PMT: crc32: 0xE2E8D349
Feb 10 11:05:05: INFO: Bitrate: 21560 Kbit/s
Feb 10 11:05:05: ERROR: CC: PID:5002=1 PID:8002=1
Feb 10 11:05:06: INFO: Bitrate: 18481 Kbit/s
Feb 10 11:05:07: INFO: Bitrate: 21560 Kbit/s
Feb 10 11:05:08: INFO: Bitrate: 18480 Kbit/s
Feb 10 11:05:09: INFO: Bitrate: 21560 Kbit/s
Feb 10 11:05:10: INFO: Bitrate: 21560 Kbit/s
Feb 10 11:05:11: INFO: Bitrate: 18481 Kbit/s
Feb 10 11:05:12: INFO: Bitrate: 21561 Kbit/s
Feb 10 11:05:13: INFO: Bitrate: 18481 Kbit/s

Rickk · Feb 10, 2019

pli, vti, ihad, hdmu does not belong to the oe alliance
probably it does not work

dxn · Feb 10, 2019

stpierre said:
Yes it work, see SoftCam by enigma1969.

where is softcam by enigma1969? Don't find it

viliev · Feb 10, 2019

Abertis on Vu+Zero

IS possible to open Abertis channels on Vu+Zero?

Spanish Abertis DTT Sat @ Hispasat 30W - Chat & How to guides

Tomek22

Registered

antrabe

Registered

Tomek22

Registered

Tomek22

Registered

Rickk

Registered

mouadhada

Registered

mouadhada

Registered

mouadhada

Registered

Rickk

Registered

Tomek22

Registered

mouadhada

Registered

mouadhada

Registered

raul1966

robertjust

Registered

Tomek22

Registered

lomismo

chk8210

Registered

Rickk

Registered

dxn

Registered

viliev

Registered