New StreamMeNG HD

marce

VIP
Messages
7,115
StreamMeNG HD 1.0.3 Alpha Build 3213 03.10.11


Code:
As promised, the mini telly now in HD!

Bug fixes:
* Unfortunately, the build was still a few stumbling blocks, mix of multi-threaded and single threaded is not good.
* IPP7.0.dll was missing (again) be fixed.

New features:
* The mini telly lüppt now in HD.
* The AV Sync is now optimal (under the DBOX).

Unfortunately, certain features work by converting any more, but piece by piece to be re-implemented.
********** Recordings still work as usual! **************

Known bugs:
* The mini telly at the moment do not fit the dimensions of the stream, which you must adapt right now via the mouse.
* A VM is the image remains dark coming soon ...

Tested with the  Coolstream & DBOX
Thx Marta.Pfahl


StreamMeNG_1.0.3Alpha_en-us.msi



StreamMeNG_1.0.3Alpha_de-de.msi
 

marce

VIP
Messages
7,115
StreamMeNG HD 1.0.3 Beta Build 5119 13.10.11

Code:
Bug Fixes:
* Unfortunately, the build were still a few stumbling blocks, mix of multi-threaded and single threaded is not good.
* IPP7.0.dll was missing (again) be fixed.
* An obsolete Intel - Runtime Library was involved.
* Customization page of the mini-telly up on the Full Screen Mode is (still off) ok.
* Volume stir in the mini-telly goes again.
* Any violation occurring in the protection of layout manager Office 2010 is fixed, THX Hapeba
* Possibly occurring Protection Fault in de Ribbon Bar is gefix, THX Hapeba


New features:
* The mini telly lüppt now also in HD.
* The AV Sync is now optimal (under the DBOX).
* OpenMP is now used in the mini-telly, which provides better load distribution to the individual
Cores, especially in HD.
* The transcoder I've got even a "few coals" upped the ante (about 27% performance gain).
* New layout manager "Windows 7" (may be more interesting for XP & Vista users).

- Some Freatures will not work, but "little by little" nachimplementiert ....
- Many improvements are still to come but then little by little, even in terms of investment objectives.
- Direct X at the moment is regarding DSound & DDraw pretty much demanded by your hardware, but will change soon ....


Tested on XP and Win7 (VMs), each with single core / multi core - DBOX & Cool Stream
Thx Marta.Pfahl


StreamMeNG_1.0.3Beta_en-us.msi



StreamMeNG_1.0.3Beta_de-de.msi
 

marce

VIP
Messages
7,115
StreamMeNG HD 1.0.3 Final Build 12 067 17:11:11


Code:
StreamMeNG HD 1.0.3 Final All for now ....
So the official story is now finished, I would like to make it short, am proud as punch, even read the change log:


* StreamMeNG now in x64!
* As promised, now the mini telly in HD!

Bug Fixes:
* Unfortunately, the build were still a few stumbling blocks, mix of multi-threaded and single threaded is not good.
* IPP7.0.dll was missing (again) be fixed.
* An obsolete Intel - Runtime Library was involved.
* Customization page of the mini-telly is now implemented.
* In full screen mode, the image is now displayed correctly in accordance with the format and, if necessary, centered (has
yes just 3 years geauert times, LOL).
* Volume stir in the mini-telly goes again.
* Mute option in the mini telly goes again.
* Any violation occurring in the protection of layout manager Office 2010 is fixed, THX Hapeba
* Possibly occurring Protection Fault in de Ribbon Bar is gefix, THX Hapeba
* The display on the stream rate is now well again, if the mini-telly runs.
* The cursor now disappears again in the mini telly, should not move the mouse (even when
multiple monitors).
* In the mini-installer was inject it with the wrong manifest file -> Error during update etc is fixed.
* Unfortunately, there were some projects compiled after a SW update from Intel Compiler 12.0 and the other with 12.1.
* To parse XML is now used XML6 M $, that the stability should increase slightly.
* The problems in de GUI should now be fixed.
* The KMP Affinity message should now no longer occur in specific AMD processors.
* DBOX: The streaming server should now go back to recording (when configured properly).
* Under WIN XP, the "Run as Admin" will work again.
* Under WIN XP, it was still a few problems with the mini-installer in the manifest file (it was an old manifesto - File
integrated and no longer generates new), is fixed.
* The x64 version is now clean installed on the mini-installer removed and reinstalled.
* Software Update is now recognized cleanly on x86 and x64 (I think it's remarkable that I
Parallel Studio overwrites the settings again).
* Heap Corruption in the classes for grabbing all the boxes is fixed.
Sometimes they occur * The message "Pure virtual function call" should no longer occur.
* E2: When streaming I have set the receive buffer now on the 64 kb, thus "wobbles" not the mini telly in HD
more so and the WEB-IF the dream does not seem to stop as quickly.
* Neutrino / HD & E1: Unfortunately, the cache has been observed in WBIF client is not the PMT PID and thus could not read the stream
turned Earths - fixed.

New features:
* In the WEB-IF I built a small client cache, which saves a couple of calls to the WEB IF the box, saving time.
* The Blue Giga is now wg. a false WEB-IF implementation circumvented, it performs a direct stream analysis,
this takes a little longer, but works.
* StreamMeNG now as x64 version.
* Preferences dialog / mini telly is revised.
* Dialog / receiver is revised.
* Various changes in the automatic software update wg. x86 & x64 version.
* I've implemented a small scheduler, which operates approximately every 20 ms range, as can be different
Register objects that want to be notified at regular intervals (eg LEDs) and it's not exactly on every millisecond
arrives, the thread and thus saves system load and memory!
* New construction road wg. 64-bit version has taken me 11 days and endless beer: D
* The threads of the mini telly now run on the thread pool (faster startup)
* Compiled with latest Intel Runtime 2011.7.258.
* Compiles with Visual Studio SP1 inc (kb2522890, kb2529927, kb2548139, and kb2549864 kb2565057).
* The mini telly lüppt now also in HD.
* The AV Sync is now optimal (under the DBOX).
* OpenMP is now used in the mini-telly, which provides better load distribution to the individual
Cores, especially in HD.
* The transcoder I've got even a "few coals" upped the ante (about 27% performance gain).
* New layout manager "Windows 7" (may be more interesting for XP & Vista users).
* After initial optimizations I was able to push the resource hunger of the mini telly in HD by approximately 15-20%.

- Some Freatures will not work, but "little by little" nachimplementiert ....
- Many improvements are still to come but then little by little, even in terms of investment objectives.
- Minimum requirement for your hardware: video card should support DirectX 7 and your sound card .... DirectSound8

Tested with the Cool Stream, DM800, Giga Blue & DBOX under XP, XP x64 & Win7 x64 Win7
Special THX @ All & Kleiner.Marta.Pfahl's for testing!
Thx Marta.Pfahl



StreamMeNG HDx64_1.0.3Final_en-us.msi

StreamMeNG HDx64_1.0.3Final_de-de.msi
 

kargo.25

Super VIP
Messages
9,725
latest StreamMeNG

StreamMeNG HD 1.0.6 Beta

In diesem Release habe ich vorgenommen die GUI ein wenig auf zu peppen und das (Auto)- SofwareUpdate neu zu implementieren.
Nebenbei habe ich mir mal die "Baustelle" Bouquet Editor genauer angeschaut ...
Ich hatte ein riesen Theater bei der Umstellung auf Visal Stdio SP1, da sich die MFC-NEXT nicht mehr so verhält, wie in früheren
Versionen. Die MFC - Next läüft nun parallel zu neuen GUI API,es wird jetzt Stück für Stück von der MFC Next auf die neue GUI-API umgestellt,
aber das dauert noch ein wenig ....

Bug-Fixes:
* Leider hab ich das OMP Geraffel ein wenig unterschätzt, daher lief es nicht mehr so "flüssig" < Quad-Core...
* Leider gab es noch ein paar Probleme mit der Caption Bar in der x32/x64 Variante ist jetzt gefixt...
* Fix in der Implementierung von MS-XML.
* Der Bouquet Editor (Neutrino [HD]) sollte nun keinen Abraucher mehr produzieren (Attribute mit Ergebnis VT_NULL werden jetzt ignoriert).
* Einige Fixes in der BUILD-Straße.
* Minor Bug Fixes ...
Neue Features:
* Die Mini-Glotze wird jetzt für Prozessoren mit nur einem Kern deaktiviert. (Ich arbeite aber an einer Lösung).
* Ich habe noch mal ordentlich in die Assembler-Trickkiste gegriffen und konnte das Kopieren von Daten zum Teil (abhängig vom Prozessor)
um 100 & beschleunigen.
* Jetzt auch mit D2D - Unterstützung (schnellerer GUI Aufbau)
* Neue Icons im Programm, THX @SwennaDeluxe
* Online-Update sollte ab dieser Version wieder funktionieren, THX @Minicat
* StreamMeNG wird nun nur noch über einen WEB-Installer installiert.
* Kompiliert mit VCST 2010 Sp1 & Update auf SP1 (KB2635973), lol.
* Ich konnte den Resourcenhunger des H264 Decoders um ca. 10% senken.
* Ich habe StreamMeNG einen neuen (alten) Video - Render dazugelegt. Stellt Ihr die Mini-GLotze auf "automatische Erkennung" wird jetzt
der "alte Video Render" aus StreamMeNG 0.99 herangezogen (natürlich ein wenig angepasst, aber der Render bestimmt nicht das Fomat vor,
sondern fragt Euer System , was es denn auf der Pfanne hat).
Known Bugs:
* Bestimmt noch viele, aber wenn mir keiner sagt, wo sie stecken kann ich sie auch nicht elemenieren...
Getestet und WIN7x86, WIN7x64 XPx64 mit DBOX, DM800 & Coolstream HD1
 
Last edited:

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,062
StreamMeNG HD 1.1.1

StreamMeNG HD 1.1.1 Beta 3841 08.03.12

Code:
Ich habe mir das Zusamenspiel zwischen StreamMeNG und dem Mini-Installer genau angeschaut und überarbeitet.
 Nebenbei habe ich ich Mini-Glotze überarbeitet.

 Bug-Fixes:
 * Ich habe bzg. vielen "Images (insbesondere E1)" ein paar Sicherheitsmaßnahmen ergriffen, da zum Teil unsauberer
 XML Code über das WEB-IF geliefert wird.
 * WIX-Installer: Leider waren die Menü-Links noch nicht an die neue Ordnerstruktur angepasst, gefixt (THX Grizzly).
 * Installer: Wird der Mini-Installer gestartet, sollte nun immer das UAC hochkommen, er benötigt halt einfach Admin Rechte
 und das auch unter x64.
 * Taskbar-Menü: StreamMeNG als Admin ausführen sollte jetzt wieder gehen (THX Grizzly)
 * Die Mini-Glotze läuft jetzt bei SD Sendern flüssiger.
 * Die Mini-Glotze lüppt jetzt wieder unter der 7020 (ENIGMAI) (THX@aticio)
 * Die Mini-Glotze schmiert jetzt nicht mehr in der Hauptapplikation.
 * Mini-Glotze: Einige Fehler in der Beutzerführung sind gefixt.
 * Mini-Glotze: Die Formate klein, mittel, normal und groß sollten jetzt auch wenn die Mini-Glotze aus dem Fullscreen Mode kommt keine
 Probleme mehr bereiten, das Haputapplikatiosfenster wird neu gepinselt.
 * ReceiverSettings: Aktiviert Ihr StreamMe den "System Startup" sollte es jetzt wieder gehen.
 * Automatisches SW Update sollte jetzt auch beim Start von StreamMeNG gehen (auch unter x64).
 * Threading Problem in den LEDs ist gelöst.
 * Start/Stop Media-Server sollte jetzt wieder ohen Probleme gehen.
 * DBOX: Start / Stop Grab-Server sollte jetzt wieder ohne Probleme gehen.
 * Das Aufziehen / Verkleinern der Mini-Glotze sollte jetzt nicht mehr zum Absturz führen. ([email protected].)
 * Eventuell auftretendes "Pinselproblem" in den Listboxen ist gefixt. ([email protected].)
 * Bei einer Neuinstallation wird die Lautstärke bei der Miniglotze anstatt mit Min. nun mit Max. übernommen. ([email protected].)
 * Minor GUI fixes.


 Neue Features:
 * E2: Versagt das Auslesenden der PID über das WEB-IF (Image Fehler), wird jetzt der Stream direkt gescannt.
 * Ich habe das Splash-Fenster beim Applikationsstart komplett überarbeitet. SPECIAL THX@SwennaDeluxe für die tollen Bilder!!!!



 Feedback ist natürlich erwünscht, viel Spass

 Marta
 

mr.strauss

Well Known Member
Messages
8,414
StreamMeNG HD 1.1.1 BetaII 4659 12.03.12

StreamMeNG HD 1.1.1 BetaII 4659 12.03.12

Ich habe mir das Zusamenspiel zwischen StreamMeNG und dem Mini-Installer genau angeschaut und überarbeitet.
Nebenbei habe ich ich Mini-Glotze überarbeitet.

Bug-Fixes:
* Ich habe bzg. vielen "Images (insbesondere E1)" ein paar Sicherheitsmaßnahmen ergriffen, da zum Teil unsauberer
XML Code über das WEB-IF geliefert wird.
* WIX-Installer: Leider waren die Menü-Links noch nicht an die neue Ordnerstruktur angepasst, gefixt (THX Grizzly).
* Installer: Wird der Mini-Installer gestartet, sollte nun immer das UAC hochkommen, er benötigt halt einfach Admin Rechte
und das auch unter x64.
* Taskbar-Menü: StreamMeNG als Admin ausführen sollte jetzt wieder gehen (THX Grizzly)
* Die Mini-Glotze läuft jetzt bei SD Sendern flüssiger.
* Die Mini-Glotze lüppt jetzt wieder unter der 7020 (ENIGMAI) (THX@aticio)
* Die Mini-Glotze schmiert jetzt nicht mehr in der Hauptapplikation.
* Mini-Glotze: Einige Fehler in der Beutzerführung sind gefixt.
* Mini-Glotze: Die Formate klein, mittel, normal und groß sollten jetzt auch wenn die Mini-Glotze aus dem Fullscreen Mode kommt keine
Probleme mehr bereiten, das Hauptapplikatiosfenster wird neu gepinselt.
* ReceiverSettings: Aktiviert Ihr StreamMe den "System Startup" sollte es jetzt wieder gehen.
* Automatisches SW Update sollte jetzt auch beim Start von StreamMeNG gehen (auch unter x64).
* Threading Problem in den LEDs ist gelöst.
* Start/Stop Media-Server sollte jetzt wieder ohne Probleme gehen.
* DBOX: Start / Stop Grab-Server sollte jetzt wieder ohne Probleme gehen.
* Das Aufziehen / Verkleinern der Mini-Glotze sollte jetzt nicht mehr zum Absturz führen. ([email protected].)
* Eventuell auftretendes "Pinselproblem" in den Listboxen ist gefixt. ([email protected].)
* Bei einer Neuinstallation wird die Lautstärke bei der Miniglotze anstatt mit Min. nun mit Max. übernommen. ([email protected].)
* Fix in der Bau-Straße, leider wurde in 3 Projekten das aktuelle "Entwicker-SDK" rangezogen, ist natürlich quatsch...
* Bei einer Aufnahme wird nun wieder in der Status-Bar die Stream-Rate angezeigt.
* Mini-Glotze: Die Berechnung der Fenstergröße im Fullscreen-Modus war totaler quatsch, sollte gefixt sein. (THX@Superbeamer)
* Minor GUI fixes.


Neue Features:
* E2: Versagt das Auslesenden der PID über das WEB-IF (Image Fehler), wird jetzt der Stream direkt gescannt.
* Ich habe das Splash-Fenster beim Applikationsstart komplett überarbeitet. SPECIAL THX@SwennaDeluxe für die tollen Bilder!!!!
* Neues Programm-Logo (THX Grizzly).

L.G. Marta
 

marce

VIP
Messages
7,115
StreamMeNG HD 1.1.2 Final 5281 15.03.12

Code:
Hot Fix: Unfortunately, there were still some problems with the mini-telly, especially when moving, I could but only after the
Yesterday Windows Update reproduce.
This version includes all fixes from 1.1.1 Final and therefore be listed again.


I have looked at the interaction between StreamMeNG game and the mini-installer carefully reviewed.
Incidentally, I have sometimes made the mini-telly.

Bug fixes:
* After switching to the mini-telly is now again used the correct ratio Ascpect.
* I have BZG. many "images (particularly E1)" a few safety measures taken, in part because unclean
XML code on the WEB-IF is delivered.
* WIX Installer: Unfortunately, the menu-links were not yet adapted to the new folder structure, fixed (THX Grizzly).
* Installer: Will start the mini-installer should now always the UAC come up, he just simply needs admin rights
and even under x64.
* Taskbar menu: Run as Admin StreamMeNG should go back now (THX Grizzly)
* The mini-telly is now running smoother for SD channels.
* The mini-telly lüppt now back below the 7020 (ENIGMAI) (THX @ aticio)
* The mini-telly no longer lubricates the main application.
* Mini-telly: Some bugs are fixed in the Beutzerführung.
* Mini-telly: The formats small, medium, normal, and should now be large even if the mini-telly comes from the fullscreen mode does not
Problems are more that Hauptapplikatiosfenster is brushed again.
* Receiver Settings: Enables you StreamMe the "System Startup" it should go now.
* Automatic software update should now go at the start of StreamMeNG (also x64).
* Threading issues are resolved in the LEDs.
* Start / Stop media server should now go back without any problems.
* DBOX: start / stop grave server should now go back without any problems.
* The mounting / out of the mini-telly should no longer cause a crash. ([email protected].)
* Any possibly "brush problem" in the list box is fixed. ([email protected].)
* For a new installation is taken over the volume in the mini telly instead of minutes now with Max. ([email protected].)
* Fix in the road construction, unfortunately, was moved into range 3 projects, the current "development-SDK", of course, is rubbish ...
* When a recording will be displayed in the status bar, the stream rate.
* Mini-telly: the calculation of the window size in fullscreen mode was utter rubbish, I should be fixed. (THX @ Super Beamer)
* Mini-telly: When moving, it should no longer come to crash (THX @ OA).
* Minor GUI fixes.


New features:
* E2: fails read the ends of the PID on the WEB-IF (image error), now the stream is scanned directly.
* I am the splash screen during application startup have been completely revised. SPECIAL THX @ SwennaDeluxe for the great pictures!!
* New program logo. (THX Grizzly)
* The splash images are now adapted to the size of the Slpash screens. (THX Grizzly)

* Tested under XPx86, and WIN7x86 Win7x64 with VMware ® Workstation 8.0.1 build-528 992 by 1 and 2 cores per CPU, each
in German and English.


Feedback is always welcome, of course,

Thx Marta.pfahl
 

mr.strauss

Well Known Member
Messages
8,414
StreamMeNG HD 1.1.3 Alpha

StreamMeNG HD 1.1.3 Alpha

Ich halte mich kurz, könnt Ihr alles im PDF nachlesen...

Feedback ist natürlich immer erwünscht ...

L.G. Marta

Thx Marta.pfahl
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,062
StreamMeNG HD 1.1.3 Beta

StreamMeNG HD 1.1.3 Beta Build 2881 30.03.12


Code:
Neben dem Ziel, die Applikation weiter zu stabilisieren, habe ich mich ein wenig mit dem Thema "Filter" beschäftigt.

Bug-Fixes:
* Coolstream: In den Receivereinstellungen ist jetzt der Punkt "Fernbedienung sperren" deaktiviert, da es die Coolstream
nicht unterstützt. [email protected]
* Alle Popups führen bei der Bedienung über die Tastatur nicht mehr zum Absturz.
* Hintereinanderes Aufrufen von verschieden Popup’s in der Mini-Glotze konnte zum Absturz führen, gefixt.
* Leider gab es in der Versionsverwaltung für's Update in der englischen Variante noch einen TYPO-Fehler, gefixt .
* Minor Bug-Fixes

Neue Features:
* Mini-Glotze: Ich habe der Mini-Glotze einen Schwarz / Weiß Filter verpaßt (sollte jetzt mit 16,24 &32 Bit Grafikkarten laufen).
Ihr könnt Ihn mit dem Popup-Menü der Miniglotze unter dem Punkt "Nostalgie Modus" oder über die Tatsatur mit "n" aktiviern
bzw. deaktivieren.
* Alle Popups der Miniglotze lassen sich jetzt sich jetzt auch über die Tastatur bedienen. Habt Ihr in einer Listbox eine Auswahl
getroffen, einfach [RETURN] bzw. [ENTER] drücken und die Auswahl wird übernommen.
* Ist die Mini-Glotze im Vordergrund und Ihr drückt die Taste "p" wird das Popup-Menü der Miniglotze aufgerufen.
* Ist die Mini-Glotze im Vordergrund und Ihr drückt die Taste "z" wird der Umschalt-Dialog aufgerufen.
* Ist die Mini-Glotze im Vordergrund und Ihr drückt die Taste "h" wird die Umschalt-Historie aufgerufen, soweit eine verfügbar ist.
* Das Ribbon Popup Info (rechts oben in der Ribbonbar) hat einen neuen Unterpunkt "Projekt - Status).
Hiermit werdet Ihr über den aktuellen Entwicklungsstatus informiert.
* Neues Popup-Design (mit Fade-Effekt).
* Neues Popup Handling (allgemein, Auto-Close).
* Das Popup-Handling in der Miniglotze habe ich komplett überarbeitet.

Feedback ist natürlich immer erwüscht !!!

L.G. Marta
 

juli13

Staff member
Administrator
Messages
10,194
StreamNeNG HD 1.1.3 Final Build 3517 04.04.12

Code:
[B]Bug fixes:[/B]
* Cool Stream: The receiver is now setting the option "Remote Lock" is disabled, since it is the cool stream
not supported. [email protected]
* All pop-ups result in the operation of the keyboard no longer crash.
Could lead * Behind Einanderes calling different pop's in the mini-crash telly, fixed.
* Unfortunately, it was in the version control system's update for the English version still a TYPO error, fixed.
* Some GUI fixes ...
* Minor bug fixes

[B]New features:[/B]
* Mini-telly: I have the mini-telly a black / white filter missed (should now run at 16.24 & 32 bit video cards).
You can with him to the pop-up menu of mini telly under "nostalgia mode" or via the Tatsatur with "n" activation period
on or off.
* All pop the mini telly can now also now use the keyboard. Do you have a selection in a listbox
made easy [RETURN] or [ENTER] key and the selection is accepted.
* If the mini-telly in the foreground and you press the key "p" is called the pop-up menu of mini telly.
* If the mini-telly in the foreground and you press the button "z" is called the Shift dialog.
* If the mini-telly in the foreground and you press the key "h" is called the shift history, if one is available.
* The ribbon popup info (top right of the Ribbonbar) has a new menu item "Project - status).
With this you get all the current development status.
* Create pop-up design (with fade effect).
* New popup handling (general, auto-close).
* The pop-up handling telly in the Mini, I've completely revamped.
* EPG details telly in the Mini now work again.
* The algorithm for the Erkenungs Picon is now improved.
* Picon are now available in version 1.0.7.
* Update on BCG Lib 1.17
* After updating / reinstalling a reboot should not be necessary.
 

mr.strauss

Well Known Member
Messages
8,414
StreamMeNG HD 1.1.4 BetaI Build 3362 22.04.12

StreamMeNG HD 1.1.4 BetaI Build 3362 22.04.12


StreamMeNG HD 1.1.4 BetaI Build 3362 22.04.12
----------------------------------------------

Pimp your DBOX, jetzt mit Streamraten bis zu 6,6 Mbs...

Bug-Fixes:
* Einige falsche Einstellungen in der Baustrasse sind gefixt.
* NEUTRINO/E1/E2/NEUTRINO-HD: MPA/MPV Aufnahmen sollten nun wieder funktionieren. THX@sork
* E1/E2/NEUTRINO-HD: Leider war im TS-Grabber ein Fehler bzwl. der Auswertung MPA/MPV Format. THX@sork
* NEUTRINO/E1/E2/NEUTRINO-HD:Reboot des Receivers führ nicht zum Dead-Lock
* Mini-Glotze: Ist ein Popup geöffnet verschwindet jetzt der Maus-Cursor nach dem Timeout der Mini-Glotze nicht mehr.
* Memory-Leak in der Kanalhistorie der Mini-Glotze gefixt.
* DBOX: Möglicher Dead-Lock (bei programmieren Aufnahmen) im PESStream ist gefixt (hat mich 4 Tage gekostet) [email protected].
* Popup Eigenschaften / Programmiere Aufnahme: Die Radio Buttons funzen nun bei der Umstellung keine/tägliche/wöchentliche Aufnahme.
* Aufnahme-Manager: Programmiert man eine "Benutzer definierte" Aufnahme, werden jetzt die Audio-Optionen der zu letzt programmieren Aufnahme
übernommen. THX@zappzero
* Im Popup "Aufnahme Eigenschaften" wird jetzt die Aufnahmekorrektur wieder mit übernommen, THX@zappzero
* Ich habe mal den "Intel Inspector" über die Applikation laufen lassen und ein paar Speicherfreigaben optimiert.
* Minor GUI Fixes (Progress Control etc...).


Neue Features:
* Ich habe den TS bzw. den PES Grabber ein wenig überarbeitet und entrümpelt. Hierdurch werden jetzt bei der DBOX höhere Übertragungsraten (bis 6,6 MBs)
erreicht, da nun andere Threads ein wenig mehr "Luft" haben. Außerdem kommt es bei MP3 Aufnahmen nicht mehr zu kleineren "Sprüngen".
* Aufnahme-Manager/Übersicht periodische Aufnahmen: Eigenschaften einer programmierten Aufnahme werden jetzt in einem Popup editiert.
* Übersicht periodische Aufnahmen: Wird eine periodische Aufnahme editiert z.B. von täglich auf wöchentlich umgestellt, wird die
Anzeige on the Fly aktualisiert.
* Der Installer merkt sich jetzt die aktuelle Version der Intel-Runtime. Ändert sich diese, oder ist es eine Neuinstallation, werdet Ihr
nach der Installation zu einem Reboot aufgefordert. Ist die Runtime immer noch die gleiche, wird kein Reboot mehr benötigt bzw.
durchgeführt.
* Direct X, genau genommen Direct Draw wird nun dynamisch angezogen und nicht mehr statisch gelinkt. Dies verhindert einige Kompatibilitätsprobleme
mit WIN7/WIN8.
* DBOX: Wird die Uhrzeit ausgelesen und weicht mehr als 61 Min. von der Systemzeit ab, gilt sie aus ungültig und der Versuch wird später wiederholt,
man kann davon ausgehen, dass dann die Uhrzeit des Receivers noch nicht synchronisiert ist. THX@sork
* Unter den Ribbon-Menüpunkt Style gibt es jetzt einen neuen Unterpunkt "Popup Animation" mit den Unterpunkten, Keine, Ein und Ausblenden,
auf und zusammenziehen, sowie falten.
* StreanMeNG ist ab dieser Version voll Windows 8 kompatibel !


Feedback wie immer unter diesem Thread,

L.G. Marta

Google-Translate

StreamMeNG HD 1.1.4 Build 3362 22:04:12 Betai
----------------------------------------------

Pimp your DBOX, now with stream rates up to 6.6 Mbs ...

Bug fixes:
* Some incorrect settings in the construction route are fixed.
* NEUTRINO/E1/E2/NEUTRINO-HD: MPA / MPV pictures should now be working again. THX @ sork
* E1/E2/NEUTRINO-HD: Unfortunately, an error in the TS-grabber bzwl. evaluation of MPA / MPV format. THX @ sork
* NEUTRINO/E1/E2/NEUTRINO-HD: Reboot the receiver not led to deadlock
* Mini-telly: Is a popup no longer disappears mouse cursor after the timeout of the mini-telly.
* Memory leak in the History Channel mini-telly fixed.
* DBOX: Possible deadlock (for program recordings) in PESStream is fixed (it took me 4 days) [email protected].
* Popup Properties / Program the recording: The radio buttons FUNZ now in no change / daily / weekly intake.
* Recording Manager: Programmed to "user defined" a shot now, the audio options, the last programmed recording
taken. THX @ zappzero
* In the popup "host properties" is now taken over again with the inclusion of correction, THX @ zappzero
* I once the "Intel Inspector" application can be run on the memory and optimized a few shares.
* Minor GUI fixes (Progress Control, etc. ..).


New features:
* I have the TS or PES grabber and cleared out a little revision. This is now at the DBOX higher transfer rates (up to 6.6 MBs)
achieved, because now other threads a little more "air" have. It also comes with MP3 recordings no longer small "jumps".
* Aufnahme-Manager/Übersicht periodic images: characteristics of a programmed recording will now be edited in a popup.
* Overview periodic shots: If a periodical edited recording as changed from daily to weekly, the
Display updated on the fly.
* The installer now remembers the current version of the Intel run-time. When this changes, or is it a new installation, you will
after installation prompted to reboot. If the runtime is still the same, is no longer needed or reboot
carried out.
* Direct X, Direct Draw, strictly speaking, is now drawn dynamically and not statically linked. This prevents some compatibility problems
with WIN7/WIN8.
* DBOX: Will read the time and differs from more than 61 minutes from the system time, it is made invalid and the test is repeated later,
one can assume that the receiver then the time is not synchronized. THX @ sork
* Under is the ribbon menu style is now a new sub-point "pop entertainment" with the sub-items, None, On and Hide,
to move in together and, as well as fold.
* StreanMeNG is from this version fully compatible with Windows 8!


Feedback, as always, this thread

L.G. Marta

Thx Marta.pfahl
 

juli13

Staff member
Administrator
Messages
10,194
StreamMeNG HD 1.1.4 Final Build 4203

Code:
Bug fixes:
* Some incorrect settings in the construction route are fixed.
* NEUTRINO/E1/E2/NEUTRINO-HD: MPA / MPV pictures should now be working again. THX @ sork
* E1/E2/NEUTRINO-HD: Unfortunately, an error in the TS-grabber bzwl. evaluation of MPA / MPV format. THX @ sork
* NEUTRINO/E1/E2/NEUTRINO-HD: Reboot the receiver not led to deadlock
* Mini-telly: Is a popup no longer disappears mouse cursor after the timeout of the mini-telly.
* Memory leak in the History Channel mini-telly fixed.
* DBOX: Possible deadlock (for program recordings) in PESStream is fixed (it took me 4 days) [email protected].
* Popup Properties / Program the recording: The radio buttons FUNZ now in no change / daily / weekly intake.
* Recording Manager: Programmed to "user defined" a shot now, the audio options, the last programmed recording
taken. THX @ zappzero
* In the popup "host properties" is now taken over again with the inclusion of correction, THX @ zappzero
* I once the "Intel Inspector" application can be run on the memory and optimized a few shares.
* Some tweaks to the "thread pool".
* Some fixes to various plugins.
* Recording Manager: Is now a recording of their properties edited verliehrt the list of "shots" is no longer the focus.
* Minor GUI fixes (Progress Control, etc. ..).


New features:
* I have the TS or PES grabber and cleared out a little revision. This is now at the DBOX higher transfer rates (up to 6.6 MBs)
achieved, because now other threads a little more "air" have. It also comes with MP3 recordings no longer small "jumps".
* Aufnahme-Manager/Übersicht periodic images: characteristics of a programmed recording will now be edited in a popup.
* Overview periodic shots: If a periodical edited recording as changed from daily to weekly, the
Display updated on the fly.
* The installer now remembers the current version of the Intel run-time. When this changes, or is it a new installation, you will
after installation prompted to reboot. If the runtime is still the same, is no longer needed or reboot
carried out.
* Direct X, Direct Draw, strictly speaking, is now drawn dynamically and not statically linked. This prevents some compatibility problems
with WIN7/WIN8.
* DBOX: Will read the time and differs from more than 61 minutes from the system time, it is made invalid and the test is repeated later,
one can assume that the receiver then the time is not synchronized. THX @ sork
* Under is the ribbon menu style is now a new sub-point "pop entertainment" with the sub-items, None, On and Hide,
to move in together and, as well as fold.
* StreamMeNG is from this version fully compatible with Windows 8!
L.G. Marta
 

kargo.25

Super VIP
Messages
9,725
StreamMeNG HD 1.1.5 Beta

StreamMeNG HD 1.1.5 Beta Build 2889 13.05.12

Code:
In diesem Release habe ich mir vorgenommen, ein paar böse Bugs zu eleminieren und die Performance der Mini-Glotze zu erhöhen.

Bug-Fixes:
* Einige Fixes in der Bau-Straße...
* Aufnahme-Manager: Ich habe mal den Dialog "Benutzerdefinierte Aufnahmen" aufgeräumt. Ist der Dialog offen, kommt es nicht
mehr zum "Freeze", wenn eine Aufnahme startet ([email protected]).
* Ist irgend ein Dialog offen, sollte es den Aufnahme-Manager nicht mehr beeinflussen, die Aufnahmen sollten starten.
* Eventuell auftretender Aufsturz bei der Inialialisierung des H264 Decoders ist gefixt.
* Memory Leak im H.264 Decorder ist gefixt.
* Memory Leak im Direct Sound Renderer ist gefixt.
* Diverse Anpassung bzgl. Threading / Threadpool.
* Der A/V Sync greift jetzt nicht mehr so hart durch.
* Die Applikation sollte unter gewissen Umständen beim Beenden ich mehr hängen bleiben.
* Minor Bug - Fixes


Neue Features:
* Aufnahme-Manager: Dialog "Benutzerdefinierte Aufnahmen" überprüft nun die aktuelle Receiver Zeit, ist die zu programmierende
Aufnahmezeit kleiner Receiverzeit minus einer Minute wird der OK Button nun automatisch deaktiviert.
* Kompiliert mit Intel IPP 7 Update 7
* Kompiliert mit der Intel UMC 7 Update 7
* Kompiliert mit Intel Runtime 2011.10.325 (Erfordert nach der Installation einen Reboot)
* Den "Performance Hunger" H.264 Decoders der Mini-Glotze konnte ich den des um ca. 50-70% senken.
* Der Installer besitzt nun eine "Custom-Action", welche die Installation im ULC Center meldet.
* Div. Optimierungen.

Bekannte Fehler: Leider funktioniert der MPEG4 Parser noch nicht mit allen HD Programmen (ZDF etc.), leider senden die Provider nicht
ISO konform. Ich bastel aber an einem "Workaround", coming soon ...


Feedback, wie immer gerne unter diesem Thread,
L.G. Marta
 
Last edited:

irsoy

Registered
Messages
5
Offline Installaer

Hello,

Could you, pls, give us the last and the offline installer of StreamNeNG HD

Thanks

StreamNeNG HD 1.1.3 Final Build 3517 04.04.12

Code:
[B]Bug fixes:[/B]
* Cool Stream: The receiver is now setting the option "Remote Lock" is disabled, since it is the cool stream
not supported. [email protected]
* All pop-ups result in the operation of the keyboard no longer crash.
Could lead * Behind Einanderes calling different pop's in the mini-crash telly, fixed.
* Unfortunately, it was in the version control system's update for the English version still a TYPO error, fixed.
* Some GUI fixes ...
* Minor bug fixes

[B]New features:[/B]
* Mini-telly: I have the mini-telly a black / white filter missed (should now run at 16.24 & 32 bit video cards).
You can with him to the pop-up menu of mini telly under "nostalgia mode" or via the Tatsatur with "n" activation period
on or off.
* All pop the mini telly can now also now use the keyboard. Do you have a selection in a listbox
made easy [RETURN] or [ENTER] key and the selection is accepted.
* If the mini-telly in the foreground and you press the key "p" is called the pop-up menu of mini telly.
* If the mini-telly in the foreground and you press the button "z" is called the Shift dialog.
* If the mini-telly in the foreground and you press the key "h" is called the shift history, if one is available.
* The ribbon popup info (top right of the Ribbonbar) has a new menu item "Project - status).
With this you get all the current development status.
* Create pop-up design (with fade effect).
* New popup handling (general, auto-close).
* The pop-up handling telly in the Mini, I've completely revamped.
* EPG details telly in the Mini now work again.
* The algorithm for the Erkenungs Picon is now improved.
* Picon are now available in version 1.0.7.
* Update on BCG Lib 1.17
* After updating / reinstalling a reboot should not be necessary.
 

kargo.25

Super VIP
Messages
9,725
StreamMeNG HD 1.1.5 Beta Build 3439 18.05.12
----------------------------------------------
Code:
In diesem Release habe ich mir vorgenommen, ein paar böse Bugs zu eleminieren und die Performance der Mini-Glotze zu erhöhen.
Nebenbei habe ich angefangen, den Transcoder zu überarbeiten.

Bug-Fixes:
* Einige Fixes in der Bau-Straße...
* Aufnahme-Manager: Ich habe mal den Dialog "Benutzerdefinierte Aufnahmen" aufgeräumt. Ist der Dialog offen, kommt es nicht
mehr zum "Freeze", wenn eine Aufnahme startet ([email protected]).
* Ist irgend ein Dialog offen, sollte es den Aufnahme-Manager nicht mehr beeinflussen, die Aufnahmen sollten starten.
* Eventuell auftretender Aufsturz bei der Inialialisierung des H264 Decoders ist gefixt.
* Memory Leak im H.264 Decorder ist gefixt.
* Memory Leak im Direct Sound Renderer ist gefixt.
* Diverse Anpassung bzgl. Threading / Threadpool.
* Der A/V Sync greift jetzt nicht mehr so hart durch.
* Die Applikation sollte unter gewissen Umständen beim Beenden nicht mehr hängen bleiben.
* Die Mini-Glotze sollte jetzt den richtigen Audio-Stream erwischen, falls mehrere Audiokänle im Stream vorhanden sind.
* Sollte die Mini-Glotze jetzt einen Stream nicht abgreifen können, kommt jetzt ein sauberer "Abbruch".
* Transcoder: Ist bei der MP3 zu MP4 Konvertierung der Orginalstream nicht sauber, bricht der Transcoder jetzt sauber ab.
* Einige GUI-Fixes.
* Minor Bug - Fixes


Neue Features:
* Aufnahme-Manager: Dialog "Benutzerdefinierte Aufnahmen" überprüft nun die aktuelle Receiver Zeit, ist die zu programmierende
Aufnahmezeit kleiner Receiverzeit minus einer Minute wird der OK Button nun automatisch deaktiviert.
* Kompiliert mit Intel IPP 7 Update 7
* Kompiliert mit der Intel UMC 7 Update 7
* Kompiliert mit Intel Runtime 2011.10.325 (Erfordert nach der Installation einen Reboot)
* Den "Performance Hunger" H.264 Decoders der Mini-Glotze konnte ich den um ca. 50-70% senken.
* Der Installer besitzt nun eine "Custom-Action", welche die erfolgreiche Installation jetzt im ULC Center meldet (aber mehr auch nicht).
* Div. Optimierungen.
* StreamMeNG HD wird nun in regenmäßigen Abständen vom Symantec geprüft und steht jetzt auf der White-List (Virenmeldungen sollte es
über den Norton AV nicht mehr geben, falls doch, bitte melden !!!).

Bekannte Fehler: Leider funktioniert der MPEG4 Parser noch nicht mit allen HD Programmen (ZDF z.B.), leider senden die Provider nicht
ISO konform. Ich bastel aber an einem "Workaround", coming soon ...


Feedback, wie immer nur unter diesem Thread. Have Fun,

L.G. Marta
 
Last edited:

juli13

Staff member
Administrator
Messages
10,194
StreamMeNG HD 1.1.6 Alpha Build 2231 30.05.12
----------------------------------------------
Bug - Fixes & enhancements for new plugin is called for ...

Bug fixes:
* Exception "Invalid application context" (Fuming) Umschaltpopup in the mini-telly is fixed (hard failure, the new version).
[Has cost me 8 evenings ...]
* Many bugs have been fixed in the construction road.
* Min bug fixes.

New features:
* There is a new DLL is added, is this is data compression, this DLL is coming
Plugins needed.
* Internal handling of channels and bouquets is improved.
* Some GUI fixes.
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,062
StreamMeNG HD 1.1.6 Beta

Code:
Bug-Fixes:
* Exception "Falscher Anwendungskontext" (Abraucher) im Umschaltpopup der Mini-Glotze ist gefixt (Harter Fehler, daher neue Version).
[Hat mich 8 Abende gekostet...]
* Die Applikation hängt sich nicht mehr auf, sollte die Miniglotze einen Sender nicht dekodieren kann.
* Viele Fehler in der Baustraße sind behoben.
* 2 (möglich auftretende) Freezer in der Threading API sind gefixt.
* Einige Fehler im Thread Pool sind gefixt.
* Einige Threading Probleme in der Mini-Glotze sind gefixt.
* Die Mini-Glotze sollte jetzt wieder unter DBOX, E1 und E2 bis auf das ZDF HD Problem laufen.
* Min. Bug-Fixes.

Neue Features:
* Aufnahme - Manager: EPG's haben jetzt einen Timestamp Cache.
* Sicherheitsupdate VC 2010 Redistributable Package (KB2467173) -> Sicherheits-Update
* Schnellere Umschaltzeiten in der Mini-Glotze (Enigma2 & Neutrino HD).
* Es ist eine neue DLL hinzugekommen, es handelt sich hierbei um Datenkompression, diese DLL wird für kommende
Plugins benötigt.
* Ich konnte den Resourcenhunger des H.264 Decoders nochmals um ca. 10-15 % senken
* Internes Handling von Kanälen und Bouquets ist verbessert.
* Der Threadpool stellt nun schneller Threads bei bedarf bereit.
* Ich habe mal experimentell die Funktion "Wake on Lan" drinn gelassen, Feedback wäre natürlich toll (Einstellungen/Receiver).
* Einige GUI Fixes.
* StreamMeNG HD steht ab sofort bei Symantec auf der White-List, d.h. der Norton AV sollte nicht mehr meckern, bzw. eine "Bedrohung" feststellen.

Feedback ist gerne erwünscht und wie immer nur unter diesem Thread.

L.G. Marta
 

kargo.25

Super VIP
Messages
9,725
Code:
StreamMeNG HD 1.1.6 Final Build 5781 20.06.12
----------------------------------------------
Bug - Fixes & Erweiterungen für neue Plugins ist angesagt...

Bug-Fixes:
* Exception "Falscher Anwendungskontext" (Abraucher) im Umschaltpopup der Mini-Glotze ist gefixt (Harter Fehler, daher neue Version).
[Hat mich 8 Abende gekostet...]
* Die Applikation hängt sich nicht mehr auf, sollte die Miniglotze einen Sender nicht dekodieren kann.
* Viele Fehler in der Baustraße sind behoben.
* 2 (möglich auftretende) Freezer in der Threading API sind gefixt.
* Einige Fehler im Thread Pool sind gefixt.
* Einige Threading Probleme in der Mini-Glotze sind gefixt.
* Die Mini-Glotze sollte jetzt wieder unter DBOX, E1 und E2 bis auf das ZDF HD Problem laufen.
* Einige GUI-Fixes.
* Min. Bug-Fixes.

Neue Features:
* E2 - Jetzt auch mit Open WEB-IF (ab V.0.1.2) Support (experimental, Feedback ist erwünscht).
* Ich habe den Muxer für die gute, alte DBox noch mal analysiert und ein wenig optimiert.
* DBox - Die Miniglotze läuft jetzt auch mit nur 2 Cores und einer Streamrate von 6.84 Mbs ruckelfrei (siehe Bild).
* Aufnahme - Manager: EPG's haben jetzt einen Timestamp Cache.
* Sicherheitsupdate VC 2010 Redistributable Package (KB2467173) -> Sicherheits-Update
* Schnellere Umschaltzeiten in der Mini-Glotze (Enigma2 & Neutrino HD).
* Es ist eine neue DLL hinzugekommen, es handelt sich hierbei um Datenkompression, diese DLL wird für kommende
Plugins benötigt.
* Ich konnte den Resourcenhunger des H.264 Decoders nochmals um ca. 10-15 % senken
* Internes Handling von Kanälen und Bouquets ist verbessert.
* Der Threadpool stellt nun schneller Threads bei Bedarf bereit.
* Ich habe mal experimentell die Funktion "Wake on Lan" drin gelassen, Feedback wäre natürlich toll (Einstellungen/Receiver).
* Einige GUI Fixes.
* StreamMeNG HD steht ab sofort bei Symantec auf der White-List, d.h. der Norton AV sollte nicht mehr meckern, bzw. eine "Bedrohung" feststellen.

Getestet unter VM-Workstaion 8 Win7x86, Win7x64 mit 2 und 4 Cores mit Coolstream , DBox , ebox7403 und DM800

L.G. Marta
 
Last edited:

juli13

Staff member
Administrator
Messages
10,194
StreamMeNG HDx64 1.1.7 Beta

Code:
[B]New features:[/B]

* Bouquet Editor: Can not be parsed XML, the bouquet editor is now disabled. In the trace you can then monitor
to recognize what was the reason (services.xml and / or (U) bouquets.xml). Ye can also look at the quick check yourself:
The XML file to download and view with IE or XML editor can, I think it will fail.
* Bouquet Editor: now HD cable boxes neutrino should also be supported (THX numatau).
* Bouquet Editor: You can now switch between HD bouquet in neutrino and UBouquet.
* Compiled with BCG Pro 18.0
* Compiled with Intel Runtime 2011.11.344, Enhancements to OpenMP * support (requires a reboot after installation)
* The installer is now created with WIX Toolset 6.3 RC (The entry in the Windows 8 ARP [Home] now looks acceptable).
 
Top