Settings Maker by TechSat TEAM

MIKAME

Super VIP
Messages
5,429
SettingsMaker Version 1.0 - TechSat TEAM
==================================
Dopo diversi mesi di sviluppo possiamo finalmente rilasciare la prima versione del SettingsMaker.

Con questo tool - per uso personale - sarà possibile generare in casa le liste canali (settings) per il proprio ricevitore modellandole secondo le proprie esigenze ed il proprio impianto.

Al momento i formati settings gestiti sono NDF, Enigma1, Enigma2, AZBox, SB-5 e Pvr-S2HD. Nuovi formati saranno implementati nelle prossime versioni di software.

Tutti i dati necesari alla creazione delle liste canali vengono prelevati dal nostro database che viene costantemente aggiornato dai componenti del TechSat Team.

Come si potrà ben immaginare si tratta di un software molto complesso che ha richiesto notevoli sforzi e tante ore di sonno perse quindi un doveroso GRAZIE è dovuto a tutti coloro che esibiscono il logo "TechSat Settings STAFF" nella propria signature.

Come nostro costume i nostri software sono assolutamente gratuiti, questo perchè i nostri sponsor - che ringraziamo - si fanno carico delle spese di noleggio del server ed a noi tanto basta.

Il database dei settings è un bene comune che deve essere mantenuto aggiornato anche grazie alle vostre segnalazioni. Chi poi volesse entrare a far parte del Team - per mantenere aggiornato il database - può farne esplicita richiesta.

Non sappiamo ancora come il nostro server reagirà ad un uso massiccio di questo nuovo tool, vi invitiamo pertanto ad utilizzarlo con parsimonia onde evitare sovraccarichi che andrebbero a discapito di tutti.


Attenzione!
Per l'installazione della lista canali su AZBox utilizzare FTP (Filezilla o simili) in quanto il caricamento della lista attaverso MaZ o SetEdit può modificarne il contenuto.
Può essere utilizzato anche MaZ ma in modalità Ftp.
Sull'AZBox i 3 files (DVBS.dat, antenna_list.dat e all_channel.dat) devono essere copiati in /DISK2.


********************************************************************************************************************************

After several months of development we can finally release the first version of SettingsMaker.

With this tool - for personal use - you can generate at home channel lists (settings) for your receiver shaping them to suit you and your facility.

At the time format settings are managed NDF, Enigma1, enigma2, Azbox, SB-5 and Pvr-S2HD. New formats will be implemented in future versions of software.

All data necessary to create the channel lists are taken from our database that is constantly updated by members of TechSat Team.

As you can well imagine this is a very complex software that has required significant effort and many hours of lost sleep and then a deserved THANK YOU is due to all those who display the logo "TechSat STAFF Settings" in your signature.

As is our custom, our software are absolutely free, this is because our sponsors - we thank - you defray the cost of hiring servers and that is enough for us.

The settings of the database is a shared resource that must be kept up to date thanks to your suggestions. Who then would become part of our team - to keep your database - it can make an explicit request.

We do not know how our server will react to a massive use of this new tool, we invite you to use it sparingly to avoid overloading which should be to the detriment of all.


Warning!
For installation of the channel list on AZBox use FTP (Filezilla or similar) as the loading of the list or Spread across MaZ SetEdit can change its contents.
It can also be used but MaZ mode FTP.
Sull'AZBox the 3 files (DVBS.dat, and antenna_list.dat all_channel.dat) must be copied to / disk2.
 

hilton

Well Known Member
Messages
7,622
SettingsMaker Version 1.1

With this tool - for personal use - you can generate at home channel lists (settings) for your receiver shaping them to suit you and your facility.

At the time format settings are managed NDF, Enigma1, enigma2, Azbox, SB-5 and Pvr-S2HD. New formats will be implemented in future versions of software.

All data necessary to create the channel lists are taken from our database that is constantly updated by members of TechSat Team.

As you can well imagine this is a very complex software that has required significant effort and many hours of lost sleep and then a deserved THANK YOU is due to all those who display the logo "TechSat STAFF Settings" in your signature.

As is our custom, our software are absolutely free, this is because our sponsors - we thank - you defray the cost of hiring servers and that is enough for us.

The settings of the database is a shared resource that must be kept up to date thanks to your suggestions. Who then would become part of our team - to keep your database - it can make an explicit request.

We do not know how our server will react to a massive use of this new tool, we invite you to use it sparingly to avoid overloading which should be to the detriment of all.

We invite you to use this tool sparingly to avoid overloading the server should be to the detriment of all.
-----------------------------------------------------------------------
Warning!
For installation of the channel list on AZBox use FTP (Filezilla or similar) as the loading of the list across MaZ or SetEdit can change its contents.
It can also be used but MaZ mode FTP.
On AZBox the 3 files DVBS.dat, antenna_list.dat and all_channel.dat must be copied to /DISK2

What's news in 1.1 version?
-------------------------------------
° Resolved little bug on graphics interface.
° Resolved bug on Switch1.1
° Added Channel Radio in General Filter Tab.
° Added combobox for choosing between West or Est Longitude
° Merged Turksat 1C (31.3°E) and Astra 2C (31.5°E) satellites in Astra 1G, 2C (31.5°E).
 

kargo.25

Super VIP
Messages
9,725
Code:
SettingsMaker1.2
SettingsMaker Version 1.2 - TechSat TEAM
==================================


With this tool - for personal use - you can generate at home channel lists (settings) for your receiver shaping them to suit you and your facility.

At the time format settings are managed NDF, Enigma1, enigma2, Azbox, SB-5, Pvr-S2HD, Pvr-ST1 and Pvr-JS1.
New formats will be implemented in future versions of software.

All data necessary to create the channel lists are taken from our database that is constantly updated by members of TechSat Team.

As you can well imagine this is a very complex software that has required significant effort and many hours of lost sleep and then a deserved THANK YOU is due to all those who display the logo "TechSat STAFF Settings" in your signature.

As is our custom, our software are absolutely free, this is because our sponsors - we thank - you defray the cost of hiring servers and that is enough for us.

The settings of the database is a shared resource that must be kept up to date thanks to your suggestions. Who then would become part of our team - to keep your database - it can make an explicit request.

We do not know how our server will react to a massive use of this new tool, we invite you to use it sparingly to avoid overloading which should be to the detriment of all.

We invite you to use this tool sparingly to avoid overloading the server should be to the detriment of all.
-----------------------------------------------------------------------
Warning!
For installation of the channel list on AZBox use FTP (Filezilla or similar) as the loading of the list across MaZ or SetEdit can change its contents.
It can also be used but MaZ mode FTP.
On AZBox the 3 files DVBS.dat, antenna_list.dat and all_channel.dat must be copied to /DISK2
-----------------------------------------------------------------------
Information.
The Pvr-ST1 and Pvr-JS1 lists do not allow the writing of the name so some groups will contain favorite group favorite channels specified but with generic title.

What's news in 1.2 version?
-------------------------------------
° Resolved a memory allocation bug on Bouquets List.
° Added buttons "Add All" and "Remove All" in Bouquet section.
° Added satellite Eutelsat W5 (at 070.5°E).
° Added Pvr-ST1 and Pvr-JS1 lists.
° Improved speed of writing files on Windows7 O.S.

TechSat Team
 

kiliantv

Super VIP
Messages
7,057
SettingsMaker Version 1.3 - TechSat TEAM
==================================​
SettingsMaker Version 1.3 - TechSat Team
=========================================

Questo programma genera automaticamente le Liste Canali (Settings)
per STB satellitari.

Con questo tool - per uso personale - sarà possibile generare in casa le liste canali (settings) per il proprio ricevitore satellitare modellandole secondo le proprie esigenze ed il proprio impianto.

Al momento i formati settings gestiti sono NDF, Enigma1, Enigma2, AZBox, SB-5, Pvr-S2HD, Pvr-ST1 e Pvr-JS1.
Nuovi formati saranno implementati nelle prossime versioni di software.

Tutti i dati necesari alla creazione delle liste canali vengono prelevati dal nostro database che viene costantemente aggiornato dai componenti del TechSat Team.

Il database dei settings è un bene comune che deve essere mantenuto aggiornato anche grazie alle vostre segnalazioni.
Chi poi volesse entrare a far parte del Team - per mantenere aggiornato il database - può farne esplicita richiesta.

-----------------------------------------------------------------------

Attenzione!
Per l'installazione della lista canali su AZBox utilizzare FTP (Filezilla o simili) in quanto il caricamento della lista attaverso MaZ o SetEdit può modificarne il contenuto.
Può essere utilizzato anche MaZ ma in modalità Ftp.
Sull'AZBox i 3 files DVBS.dat, antenna_list.dat e all_channel.dat devono essere copiati in /DISK2.
-----------------------------------------------------------------------

Informazione.
Le liste Pvr-ST1 e Pvr-JS1 non consentono la scrittura del nome gruppo preferiti pertanto alcuni gruppi conterranno i canali favoriti specificati ma con titolo generico.


Novità nella versione 1.3
-------------------------------------
° Aggiunto il filtro sui transponders "Occasionali o Feed".
Questa opzione è disponibile per ogni satellite oppure nel Tab "General Filter".
° Aumentato il numero dei Gruppi Favoriti gestiti (ora 48).
° Aggiunte funzioni di ordinamento sui Bouquet.
° Modificato il layout del Tab "General Filter".
° Variazione dinamica del testo al variare della lingua selezionata.
° Aggiunto controllo sulle variazioni della configurazione.
° Aggiunta la visualizzazione del nome del file di configurazione corrente nella Windows Title.

What's news in 1.3 version?
-------------------------------------
° Added the "Occasional or Feed" filter on transponders.
This option is available for each Sat or in General Filter Tab.
° Increased the number of Favorite Groups (now 48).
° Added sorting functions on Bouquets.
° Restyled the General Filter Tab.
° Dynamic variation of the text when changing the selected language.
° Added configuration checking in case of changes.
° Added the name visualization of the current configuration file in the Windows Titlebar.

TechSat Team
 

bellof

Well Known Member
Messages
1,791
SettingsMaker Version 1.4 - TechSat Team
=========================================

Questo programma genera automaticamente le Liste Canali (Settings)
per STB satellitari.

Con questo tool - per uso personale - sarà possibile generare in casa le liste canali (settings) per il proprio ricevitore satellitare modellandole secondo le proprie esigenze ed il proprio impianto.

Al momento i formati settings gestiti sono NDF, Enigma1, Enigma2, AZBox, SB-5, Pvr-S2HD, Pvr-ST1 e Pvr-JS1.
Nuovi formati saranno implementati nelle prossime versioni di software.

Tutti i dati necesari alla creazione delle liste canali vengono prelevati dal nostro database che viene costantemente aggiornato dai componenti del TechSat Team.

Il database dei settings è un bene comune che deve essere mantenuto aggiornato anche grazie alle vostre segnalazioni.
Chi poi volesse entrare a far parte del Team - per mantenere aggiornato il database - può farne esplicita richiesta.

-----------------------------------------------------------------------

Attenzione!
Per l'installazione della lista canali su AZBox utilizzare FTP (Filezilla o simili) in quanto il caricamento della lista attaverso MaZ o SetEdit può modificarne il contenuto.
Può essere utilizzato anche MaZ ma in modalità Ftp.
Sull'AZBox i 3 files DVBS.dat, antenna_list.dat e all_channel.dat devono essere copiati in /DISK2.
-----------------------------------------------------------------------

Informazione.
Le liste Pvr-ST1 e Pvr-JS1 non consentono la scrittura del nome gruppo preferiti pertanto alcuni gruppi conterranno i canali favoriti specificati ma con titolo generico.


Novità nella versione 1.4
-------------------------------------
° Corretti alcuni termini nella lingua francese.
° Risolti piccoli bug minori
° Corretta la gestione delle modulazioni QPSK e 8PSK nelle liste Pvr-S2.
° Aggiunto limite automatico di 100 canali per gruppo favorito nelle liste SB-5 e S2-HD.
° Adeguato il formato del file satellites.xml nelle liste Enigma 1 e 2.
° Estese le informazioni gestibili nelle liste Enigma 1 e 2.
° Modificata la modalità di gestione dei bouquet e aggiunte le funzioni di sort anche nella lista dei bouquet esclusi.
° Aggiunto il filtro "Usa il Parental Control" sui canali.
Questa opzione è disponibile per ogni satellite oppure nel Tab "General Filter".
° Aggiunti i bottoni "Select All" e "Unselect All" nella sezione Favoriti.
° Nuovi gruppi favoriti a cura di ^ZioGià^.

What's news in 1.4 version?
-------------------------------------
° Fixed a few terms of French language.
° Resolved little minor bugs.
° Correct the management of QPSK and 8PSK modulations on Pvr-S2 lists.
° Added automatic limit of 100 channels per favorite group in SB-5 and S2-HD lists.
° Advanced the file satellites.xml in Enigma 1 and 2 lists.
° Extended information manageable on the lists Enigma 1 and 2.
° Modified method for managing the bouquet and added the features for sort the list of excluded bouquet.
° Added the "Use the Parental Control" filter on Channels.
This option is available for each Sat or in General Filter Tab.
° Added the button "Select All" and "Unselect All" in Favorites section.
° New favorite groups by ^ZioGià^.

TechSat Team
 

MIKAME

Super VIP
Messages
5,429
SettingsMaker Version 1.5 - TechSat TEAM
==================================

Questo programma genera automaticamente le Liste Canali (Settings)
per STB satellitari.

Con questo tool - per uso personale - sarà possibile generare in casa le liste canali (settings) per il proprio ricevitore satellitare modellandole secondo le proprie esigenze ed il proprio impianto.

Al momento i formati settings gestiti sono NDF, Enigma1, Enigma2, AZBox, SB-5, Pvr-S2HD, Pvr-ST1, Pvr-JS1, JST-5, MV200HD e MV300HD.
Nuovi formati saranno implementati nelle prossime versioni di software.

Tutti i dati necesari alla creazione delle liste canali vengono prelevati dal nostro database che viene costantemente aggiornato dai componenti del TechSat Team.

Il database dei settings è un bene comune che deve essere mantenuto aggiornato anche grazie alle vostre segnalazioni.
Chi poi volesse entrare a far parte del Team - per mantenere aggiornato il database - può farne esplicita richiesta.

-----------------------------------------------------------------------

Attenzione!
Per l'installazione della lista canali su AZBox utilizzare FTP (Filezilla o simili) in quanto il caricamento della lista attaverso MaZ o SetEdit può modificarne il contenuto.
Può essere utilizzato anche MaZ ma in modalità Ftp.
Sull'AZBox i 3 files DVBS.dat, antenna_list.dat e all_channel.dat devono essere copiati in /DISK2.
-----------------------------------------------------------------------

Informazione.
Le liste Pvr-ST1 e Pvr-JS1 non consentono la scrittura del nome gruppo preferiti pertanto alcuni gruppi conterranno i canali favoriti specificati ma con titolo generico.


Novità nella versione 1.5
-------------------------------------
° Aggiunto il tab "List Preview" che offre la possibilita'
di effettuare il preview delle liste generate.
° Aggiunta la gestione dei canali DVB-T (DTT).
° Aggiunte le liste per Clarke Tech. Ora disponibili:
NDF SD = 1500, 2000, 2100, 1500p, 2100p, 2500, 3100.
NDF HD = HD5000-S
NDF HD+DTT = HD5000-C, HD5100-C
° Ripristinata la funzionalità delle liste Jepssen Pvr-JS1.
° Corretta la gestione dei pid audio (se in numero superiore a 2)
nelle liste Jepssen Pvr-ST1 e Pvr-JS1.
° Aggiunto il supporto per le liste Jepssen ST-5 HD.
° Aggiunto il supporto per le liste mVision 200HD e 300HD.

What's news in 1.5 version?
-------------------------------------
° Added tab "List Preview" which offers the possibility
to make the preview of the generated lists.
° Added handling of DVB-T channels (DTT).
° Added Clarke Tech lists. Now available:
NDF SD = 1500, 2000, 2100, 1500p, 2100p, 2500, 3100.
NDF HD = HD5000-S
NDF HD+DTT = HD5000-C, HD5100-C
° Restores the functionality of Jepssen Pvr-JS1 lists.
° Proper management of audio pid (if number greater than 2)
into Jepssen Pvr-ST1 and Pvr-JS1 lists.
° Added Jepssen ST-5 HD lists.
° Added Mvision 200HD and 300HD lists.


TechSat Team
 

aamir11

Senior Member
Messages
183
SettingsMaker Version 1.6

SettingsMaker Version 1.5
=========================

Questo programma genera automaticamente le Liste Canali (Settings)
per STB satellitari.

Con questo tool - per uso personale - sarà possibile generare in casa le liste canali (settings) per il proprio ricevitore satellitare modellandole secondo le proprie esigenze ed il proprio impianto.

Al momento i formati settings gestiti sono NDF, Enigma1, Enigma2, AZBox, SB-5, Pvr-S2HD, Pvr-ST1, Pvr-JS1, JST-5, MV200HD e MV300HD.
Nuovi formati saranno implementati nelle prossime versioni di software.

Tutti i dati necesari alla creazione delle liste canali vengono prelevati dal nostro database che viene costantemente aggiornato dai componenti del TechSat Team.

Il database dei settings è un bene comune che deve essere mantenuto aggiornato anche grazie alle vostre segnalazioni.
Chi poi volesse entrare a far parte del Team - per mantenere aggiornato il database - può farne esplicita richiesta.

-----------------------------------------------------------------------

Attenzione!
Per l'installazione della lista canali su AZBox utilizzare FTP (Filezilla o simili) in quanto il caricamento della lista attaverso MaZ o SetEdit può modificarne il contenuto.
Può essere utilizzato anche MaZ ma in modalità Ftp.
Sull'AZBox i 3 files DVBS.dat, antenna_list.dat e all_channel.dat devono essere copiati in /DISK2.
-----------------------------------------------------------------------

Informazione.
Le liste Pvr-ST1 e Pvr-JS1 non consentono la scrittura del nome gruppo preferiti pertanto alcuni gruppi conterranno i canali favoriti specificati ma con titolo generico.


Novità nella versione 1.5
-------------------------------------
° Aggiunto il tab "List Preview" che offre la possibilita'
di effettuare il preview delle liste generate.
° Aggiunta la gestione dei canali DVB-T (DTT).
° Aggiunte le liste per Clarke Tech. Ora disponibili:
NDF SD = 1500, 2000, 2100, 1500p, 2100p, 2500, 3100.
NDF HD = HD5000-S
NDF HD+DTT = HD5000-C, HD5100-C
° Ripristinata la funzionalità delle liste Jepssen Pvr-JS1.
° Corretta la gestione dei pid audio (se in numero superiore a 2)
nelle liste Jepssen Pvr-ST1 e Pvr-JS1.
° Aggiunto il supporto per le liste Jepssen ST-5 HD.
° Aggiunto il supporto per le liste mVision 200HD e 300HD.

What's news in 1.5 version?
-------------------------------------
° Added tab "List Preview" which offers the possibility
to make the preview of the generated lists.
° Added handling of DVB-T channels (DTT).
° Added Clarke Tech lists. Now available:
NDF SD = 1500, 2000, 2100, 1500p, 2100p, 2500, 3100.
NDF HD = HD5000-S
NDF HD+DTT = HD5000-C, HD5100-C
° Restores the functionality of Jepssen Pvr-JS1 lists.
° Proper management of audio pid (if number greater than 2)
into Jepssen Pvr-ST1 and Pvr-JS1 lists.
° Added Jepssen ST-5 HD lists.
° Added Mvision 200HD and 300HD lists.​
 

bellof

Well Known Member
Messages
1,791
SettingsMaker Version 1.5b - TechSat TEAM
==================================​

SettingsMaker Version 1.5b - TechSat Team
=========================================

Questo programma genera automaticamente le Liste Canali (Settings)
per STB satellitari.

Con questo tool - per uso personale - sarà possibile generare in casa le liste canali (settings) per il proprio ricevitore satellitare modellandole secondo le proprie esigenze ed il proprio impianto.

Al momento i formati settings gestiti sono NDF, Enigma1, Enigma2, AZBox, SB-5, Pvr-S2HD, Pvr-ST1, Pvr-JS1, JST-5, MV200HD e MV300HD.
Nuovi formati saranno implementati nelle prossime versioni di software.

Tutti i dati necesari alla creazione delle liste canali vengono prelevati dal nostro database che viene costantemente aggiornato dai componenti del TechSat Team.

Il database dei settings è un bene comune che deve essere mantenuto aggiornato anche grazie alle vostre segnalazioni.
Chi poi volesse entrare a far parte del Team - per mantenere aggiornato il database - può farne esplicita richiesta.

-----------------------------------------------------------------------

Attenzione!
Per l'installazione della lista canali su AZBox utilizzare FTP (Filezilla o simili) in quanto il caricamento della lista attaverso MaZ o SetEdit può modificarne il contenuto.
Può essere utilizzato anche MaZ ma in modalità Ftp.
Sull'AZBox i 3 files DVBS.dat, antenna_list.dat e all_channel.dat devono essere copiati in /DISK2.
-----------------------------------------------------------------------

Informazione.
Le liste Pvr-ST1 e Pvr-JS1 non consentono la scrittura del nome gruppo preferiti pertanto alcuni gruppi conterranno i canali favoriti specificati ma con titolo generico.


Novità nella versione 1.5
-------------------------------------
° Aggiunto il tab "List Preview" che offre la possibilita'
di effettuare il preview delle liste generate.
° Aggiunta la gestione dei canali DVB-T (DTT).
° Aggiunte le liste per Clarke Tech. Ora disponibili:
NDF SD = 1500, 2000, 2100, 1500p, 2100p, 2500, 3100.
NDF HD = HD5000-S
NDF HD+DTT = HD5000-C, HD5100-C
° Ripristinata la funzionalità delle liste Jepssen Pvr-JS1.
° Corretta la gestione dei pid audio (se in numero superiore a 2)
nelle liste Jepssen Pvr-ST1 e Pvr-JS1.
° Aggiunto il supporto per le liste Jepssen ST-5 HD.
° Aggiunto il supporto per le liste mVision 200HD e 300HD.

What's news in 1.5 version?
-------------------------------------
° Added tab "List Preview" which offers the possibility
to make the preview of the generated lists.
° Added handling of DVB-T channels (DTT).
° Added Clarke Tech lists. Now available:
NDF SD = 1500, 2000, 2100, 1500p, 2100p, 2500, 3100.
NDF HD = HD5000-S
NDF HD+DTT = HD5000-C, HD5100-C
° Restores the functionality of Jepssen Pvr-JS1 lists.
° Proper management of audio pid (if number greater than 2)
into Jepssen Pvr-ST1 and Pvr-JS1 lists.
° Added Jepssen ST-5 HD lists.
° Added Mvision 200HD and 300HD lists.

TechSat Team


La versione 1.5b corregge un problema sulle liste Jepssen ST-5 che mandava in blocco il ricevitore.
Tale Problema è stato generato dalla errata documentazione tecnica pervenutaci.
 

elgeneral

Well Known Member
Messages
7,811
SettingsMaker Version 1.6 by TechSat Team
*************
* Changelog *
*************

What's news in 1.6 version?

-------------------------------------
° Fixed the calculation of the namespace in Enigma lists.
° Improved management of the Service Type in Enigma lists.
° Fixed a bug that prevented the DTT channels to be
written in favorites groups of NDF HD+DTT lists.
° Brought to 6000 the maximum number of channels of receiver
Jepssen ST-5 HD (from firmware version 3.22).
° Added the bouquet and the favorite group AustriaSat.
° Resolved little minor bugs.


gracias a grantor
 

hilton

Well Known Member
Messages
7,622
SettingsMaker Version 1.7 - TechSat TEAM​
==================================


Code:
SettingsMaker Version 1.7 - TechSat Team
=========================================

What's new in version 1.7
---------------------------------
° Added support for Neutrino Plus HD API 3 lists (eg CoolStream)
° Added support for HNF Humax formats lists.
° Added support for ALI formats lists (eg Edision Argus, Golden Media, Opticum, Amiko, etc)
° Added support for Nokia 9701s lists.
° Added support for Jepssen ST-4 HD lists.
° Added Madrid and Toledo digital terrestrial channels list.
° Fixed a bug that prevented the proper NDF lists functioning when used motorized Fake channels.
° limited to 120 the number of channels for favorite group NDF lists.
° limited to 15 characters in the satellites name and to 19 character the channel name in the NDF lists.
° Fixed a bug on the nid and tid lists value of ST-5 decoder.
° Various minor implementations.
 

tani1

Staff member
Super Moderator
Messages
17,767
SettingsMaker Version 1.8 by TechSat Team
===========================================
This program automatically generates the Channel list (Settings)
for some satellite STB models.

With this tool - for personal use only - you can generate your own channel list
(Settings) for your satellite decoder shaping it to your needs and your system.

At the time, the settings formats managed by the tool are: NDF, NDF HD, NDF HD+DTT, Enigma1,
Enigma2, AZBox, SB-5, Pvr-S2HD, Pvr-ST1, Pvr-JS1, JST-5, MV200HD, MV300HD, Neutrino Plus HD,
HNF, Nokia9701s, Edision Argus, Golden Media combo, Golden Media 9055HD, Opticum, Amiko.
New formats will be implemented in future versions of software.

All data necessary to create the channel lists are taken from our database
which is constantly updated by members of TechSat Team.

As you can well imagine, this is a very complex software that has required substantial
efforts and many hours of "lost sleep" :) So, a deserved THANK YOU is due to all those who
can exhibit the "TechSat STAFF Settings " logo in his signature.

As usual, our software is absolutely free, this is because our sponsors
- we thank them - support the cost of hiring servers and... that's enough for us!

The database containing settings is a shared resource that must be constantly kept up to date,
even with thanks to the YOUR reportings.
Who then would become part of our "settings team" - to keep database up to date - can
ask it in our Board.
-------------------------------------------------- ---------------------

Warning!
This tool generates a list of channels version 09 for AZBox usable from
firmware version 0.9.4923.
To install the channel list on AZBox use a FTP client (Filezilla or similar) as
loading the list with MaZ SetEdit can modify its contents.
If you use MaZ, please use it in FTP mode.
On AZBox decoder the files: DVBS.dat, [DVBT.dat], antenna_list.dat, all_channel.dat
must be copied in /DISK2.
-------------------------------------------------- ---------------------

Information.

Pvr-ST1 and Pvr-JS1 lists do not allow the writing of the group name so some favorites
groups will contain favorite channels specified but with generic title.

*************
* Changelog *
*************

What's new in version 1.8
---------------------------------
° Renamed the list type ALI in ALI DTT.
° Added support for Golden Media 9055HD (ALI).
° New favorite groups.
° Renamed favorite groups with international name.
° New Italian Terrestrial zones: Napoli, Torino, Forte Dei Marmi, Reggio Emilia.

TechSat Team
 

elgeneral

Well Known Member
Messages
7,811
Changelog

What's new in version 1.9

---------------------------------
° Corrected same terms of Spanish language (Pe.tardo).
° Added Catalan Application Language (Pe.tardo).
° Fixed a bug on Jepssen Pvr-S2 on FEC of DVB-S2 Transponders.
° Fixed a bug on the list type "Favorites as Satellites".
° Fixed a bug on ST-4 and ST-5 lists for West satellites.
° Fixed a bug on JS-1 lists on the file size.
° Fixed a bug on Neutrino lists.
° Added support for lists version 0A for Azbox firmware Opensat.
° Added support for Hivion HD-9090x Ultima lists.
° Added support for DVBViewer lists.
(It is also self-generated the file install.bat for automatic
installation of the list)
° New Italian Terrestrial zones: Messina and Modena.

TechSat Team
 

tani1

Staff member
Super Moderator
Messages
17,767
SettingsMaker Version 2.0
What's new in version 2.0
---------------------------------
° Added handling of SCR LNB for Unicable Protocol.
The decoders managed are: AZBox, Jepssen Pvr-ST1 and Pvr-JS1,
Jepssen Mediabox ST-4 and ST-5 HD.
° Added the transfer function of lists on linux decoder.
° Edit ALI family lists for proper management of the new FW with
reduced space for the lists defauldb.
° New database server.

TechSat Team
 

hilton

Well Known Member
Messages
7,622
What's new in version 2.1 RC3
---------------------------------
° Added in Tab "List Preview" a simple editor with delete and
"Drag & Drop" functions to move channels or groups of channels.
° Added a function for autoupdate of SMconfig.smc file
(File -> Update Application Cfg).
° Added the ability to select/deselect the transponders in
DVB-S2 modulation.
Warning! This change involves the use of the new file default.cfg
° New file format Default.cfg
° Correct a bug on AZbox lists version 0A.
° Correct management of committed/uncommited parameters in NDF lists.
° Brought to 8000 the number of channels can be stored on MVision 300HD.
 

hilton

Well Known Member
Messages
7,622
SettingsMaker Version 2.1 - TechSat TEAM
==================================


What's new in version 2.1
---------------------------------
° Added in Tab "List Preview" a simple editor with delete and
"Drag & Drop" functions to move channels or groups of channels.
° Added a function for autoupdate of SMconfig.smc file
(File -> Update Application Cfg).
° Added the ability to select/deselect the transponders in
DVB-S2 modulation.
Warning! This change involves the use of the new file Default.cfg
° New file format Default.cfg
° Correct a bug on AZbox lists version 0A.
° Correct management of committed/uncommited parameters in NDF lists.
° Correct management of DiSEqC switch on MVision 200HD and 300HD.
° Brought to 8000 the number of channels can be stored on MVision 300HD.

TechSat Team
 

hilton

Well Known Member
Messages
7,622
SettingsMaker Version 2.2 - TechSat TEAM


What's new in version 2.2
---------------------------------
° Added support for mVision HD270CN lists.
° Added support for Edision Pingulux Spark E2 lists.
° Added support for Edision Mini High Speed 2in1 lists.
° Added support for Golden Media 766 lists.
° Added support for Ferguson Ariva 120 lists.
° Improved function for online update of the configuration
file SMconfig.smc.
° Added a check to exclude being downloaded the favorites
groups not present in the SMconfig.smc configuration file.
° Fixed a bug on include/exclude bouquet function.
° Fixed a bug on Fake channel for AZBox lists.
° Improved function of choice of cities for Terrestrial.
° Added new Italian DTT zone.
 

kargo.25

Super VIP
Messages
9,725
SettingsMaker Version 2.3

SettingsMaker Version 2.3 - TechSat TEAM
==================================​
SettingsMaker Version 2.3 - TechSat Team
=========================================

Questo programma genera automaticamente le Liste Canali (Settings)
per STB satellitari.

Con questo tool - per uso personale - sarà possibile generare in casa le liste canali
(settings) per il proprio ricevitore satellitare modellandole secondo le proprie
esigenze ed il proprio impianto.

Al momento i formati settings gestiti sono:
NDF, NDF HD, NDF HD+DTT, Enigma1, Enigma2, AZBox, SB-5, Pvr-S2HD, Pvr-ST1, Pvr-JS1,
JST-5, MV200HD, MV300HD, HD270CN, Neutrino Plus HD, HNF, Nokia9701s, Edision Argus,
Golden Media combo, Golden Media 9055HD, Opticum, Amiko, DVBViewer card,
Edision Pingulux Spark E2, SAB Unix F+ Solo (S902), Edision Mini High Speed 2in1,
Golden Media 766, Ferguson Ariva 120.
Nuovi formati saranno implementati nelle prossime versioni di software.

Tutti i dati necesari alla creazione delle liste canali vengono prelevati dal nostro database
che viene costantemente aggiornato dai componenti del TechSat Team.

Come si potrà ben immaginare si tratta di un software molto complesso che ha richiesto notevoli
sforzi e tante ore di sonno perse quindi un doveroso GRAZIE è dovuto a tutti coloro che
esibiscono il logo "TechSat Settings STAFF" nella propria signature.

Come nostro costume i nostri software sono assolutamente gratuiti, questo perchè i nostri sponsor
- che ringraziamo - si fanno carico delle spese di noleggio del server ed a noi tanto basta.

Il database dei settings è un bene comune che deve essere mantenuto aggiornato anche grazie alle
vostre segnalazioni.
Chi poi volesse entrare a far parte del Team - per mantenere aggiornato il database - può farne
esplicita richiesta.
-----------------------------------------------------------------------

Attenzione!
Questo tool genera liste canali versione 0x09 e 0x0A per AZBox utilizzabili a partire dalla
versione di firmware 0.9.4923.

-----------------------------------------------------------------------

Informazione.
Le liste Pvr-ST1 e Pvr-JS1 non consentono la scrittura del nome gruppo preferiti pertanto
alcuni gruppi conterranno i canali favoriti specificati ma con titolo generico.

*************
* Changelog *
*************

Novità nella versione 2.3
-------------------------------------
° Corretto un bug quando ricaricati i bouquet inclusi/esclusi.
° Corretto un bug sui canali DVB-T VHF nelle liste Enigma1 e Enigma2.
° Corretto un bug sui pid audio maggiori di 8191 nelle liste NDF.
° Corretto un bug sulle liste ALI-DTT quando non selezionato alcun gruppo favorito.
° Aggiunto il supporto per le liste Jepssen S1 HD.
° Migliorata la funzione di apertura del file di configurazione.
° Migliorata la funzione di autoaggiornamento dei file di configurazione.
° Aggiunte nuove zone DTT Italia.


What's new in version 2.3
---------------------------------
° Fixed a bug when reload included/excluded bouquets.
° Fixed a bug on channels DVB-T VHF in lists Enigma1 and Enigma2.
° Fixed a bug on audio pid higher of 8191 in NDF lists.
° Fixed a bug in the lists ALI-DTT when not selected any favorite group.
° Added support for Jepssen S1 HD lists.
° Improved the function to open the configuration file.
° Improved the function of autoupdate of configuration file.
° Added new Italian DTT zone.


TechSat Team
 

MIKAME

Super VIP
Messages
5,429
SettingsMaker Version 2.4 - TechSat TEAM
==================================


Questo programma genera automaticamente le Liste Canali (Settings)
per STB satellitari.

Con questo tool - per uso personale - sarà possibile generare in casa le liste canali
(settings) per il proprio ricevitore satellitare modellandole secondo le proprie
esigenze ed il proprio impianto.

Al momento i formati settings gestiti sono:
NDF, NDF HD, NDF HD+DTT, Enigma1, Enigma2, AZBox, SB-5, Pvr-S2HD, Pvr-ST1, Pvr-JS1,
JST-5, MV200HD, MV300HD, HD270CN, Neutrino Plus HD, HNF, Nokia9701s, Edision Argus,
Golden Media combo, Golden Media 9055HD, Opticum, Amiko Alien2, DVBViewer card,
Edision Pingulux Spark, GM Triplex, SAB Unix F+ Solo (S902), Edision Mini High Speed 2in1,
Golden Media 766, Ferguson Ariva 120.
Nuovi formati saranno implementati nelle prossime versioni di software.

Tutti i dati necesari alla creazione delle liste canali vengono prelevati dal nostro database
che viene costantemente aggiornato dai componenti del TechSat Team.

Come si potrà ben immaginare si tratta di un software molto complesso che ha richiesto notevoli
sforzi e tante ore di sonno perse quindi un doveroso GRAZIE è dovuto a tutti coloro che
esibiscono il logo "TechSat Settings STAFF" nella propria signature.

Come nostro costume i nostri software sono assolutamente gratuiti, questo perchè i nostri sponsor
- che ringraziamo - si fanno carico delle spese di noleggio del server ed a noi tanto basta.

Il database dei settings è un bene comune che deve essere mantenuto aggiornato anche grazie alle
vostre segnalazioni.
Chi poi volesse entrare a far parte del Team - per mantenere aggiornato il database - può farne
esplicita richiesta.
-----------------------------------------------------------------------

Attenzione!
Questo tool genera liste canali versione 0x09 e 0x0A per AZBox utilizzabili a partire dalla
versione di firmware 0.9.4923.

-----------------------------------------------------------------------

Informazione.
Le liste Pvr-ST1 e Pvr-JS1 non consentono la scrittura del nome gruppo preferiti pertanto
alcuni gruppi conterranno i canali favoriti specificati ma con titolo generico.

*************
* Changelog *
*************

Novità nella versione 2.4
-------------------------------------
° Migliorata la funzione di autoaggiornamento dei file di configurazione.
° Corretto un bug sulle liste ALI-DTT per Golden Media 776.
° Corretto un bug sull'impostazione del protocollo H264 delle liste DvbViewer.
° Aggiunto un controllo su NID e TID delle liste Enigma1 e Enigma2.
° Aggiunta la gestione dei canali DTT nelle liste Spark.
° Aggiunte nuove zone DTT Italia.

What's new in version 2.4
---------------------------------
° Improved the function of autoupdate of configuration file.
° Fixed a bug in the lists ALI-DTT for Golden Media 776.
° Fixed a bug on setting the H264 protocol on DVBViewer lists.
° Added handling of DTT channels on Spark lists.
° Added a control on NID and TID on Enigma1 and Enigma2 lists.
° Added new Italian DTT zone.


TechSat Team
 

powercisco

Super VIP
Messages
9,100
SettingsMaker Version 2.5 - TechSat TEAM
==================================​
SettingsMaker Version 2.5 - TechSat Team
=========================================

Questo programma genera automaticamente le Liste Canali (Settings)
per STB satellitari.

Con questo tool - per uso personale - sarà possibile generare in casa le liste canali
(settings) per il proprio ricevitore satellitare modellandole secondo le proprie
esigenze ed il proprio impianto.

Al momento i formati settings gestiti sono:
NDF, NDF HD, NDF HD+DTT, Enigma1, Enigma2, AZBox, SB-5, Pvr-S2HD, Pvr-ST1, Pvr-JS1,
JST-5, MV200HD, MV300HD, HD270CN, Neutrino Plus HD, HNF, Nokia9701s, Edision Argus,
Golden Media combo, Golden Media 9055HD, Opticum, Amiko Alien2, DVBViewer card,
Edision Pingulux Spark, GM Triplex, SAB Unix F+ Solo (S902), Edision Mini High Speed 2in1,
Golden Media 766, Ferguson Ariva 120, Opticum TS9600HD Prima.
Nuovi formati saranno implementati nelle prossime versioni di software.

Tutti i dati necesari alla creazione delle liste canali vengono prelevati dal nostro database
che viene costantemente aggiornato dai componenti del TechSat Team.

Come si potrà ben immaginare si tratta di un software molto complesso che ha richiesto notevoli
sforzi e tante ore di sonno perse quindi un doveroso GRAZIE è dovuto a tutti coloro che
esibiscono il logo "TechSat Settings STAFF" nella propria signature.

Come nostro costume i nostri software sono assolutamente gratuiti, questo perchè i nostri sponsor
- che ringraziamo - si fanno carico delle spese di noleggio del server ed a noi tanto basta.

Il database dei settings è un bene comune che deve essere mantenuto aggiornato anche grazie alle
vostre segnalazioni.
Chi poi volesse entrare a far parte del Team - per mantenere aggiornato il database - può farne
esplicita richiesta.
-----------------------------------------------------------------------

Attenzione!
Questo tool genera liste canali versione 0x09 e 0x0A per AZBox utilizzabili a partire dalla
versione di firmware 0.9.4923.

-----------------------------------------------------------------------

Informazione.
Le liste Pvr-ST1 e Pvr-JS1 non consentono la scrittura del nome gruppo preferiti pertanto
alcuni gruppi conterranno i canali favoriti specificati ma con titolo generico.

*************
* Changelog *
*************

Novità nella versione 2.5
-------------------------------------
° Corretto un bug sulle liste NDF sul settaggio del parametro pilot dei TP DVB-S2.
° Aggiunto il supporto per le liste Opticum HD TS 9600 Prima.
° Aggiunta la gestione del nostro plugin enigma2/dvbapp2 SME2Plugin.
° Migliorata la compatibilità con i nuovi firmware ALI (Uni-Box2 fw).


What's new in version 2.5
---------------------------------
° Fixed a bug on the list NDF about setting of parameter pilot of the TP DVB-S2.
° Added support for Opticum HD TS 9600 Prima lists.
° Added handling of the our plugin enigma2/dvbapp2 SME2Plugin.
° Improved compatibility with new ALI firmwares (Uni-Box2 fw).


TechSat Team
 

baha2

Super VIP
Messages
6,530
SettingsMaker Version 2.6 - TechSat TEAM
==================================

SettingsMaker Version 2.6 - TechSat Team
=========================================

Questo programma genera automaticamente le Liste Canali (Settings)
per STB satellitari.

Con questo tool - per uso personale - sarà possibile generare in casa le liste canali
(settings) per il proprio ricevitore satellitare modellandole secondo le proprie
esigenze ed il proprio impianto.

Al momento i formati settings gestiti sono:
NDF, NDF HD, NDF HD+DTT, Enigma1, Enigma2, AZBox, SB-5, Pvr-S2HD, Pvr-ST1, Pvr-JS1,
ST-4 HD, ST-4 Plus HD, ST-5 HD, M-1 HD, M-2 HD, MV200HD, MV300HD, HD270CN,
Neutrino Plus HD, HNF, Nokia9701s, Edision Argus, Golden Media combo, Golden Media 9055HD,
Opticum, Amiko Alien2, DVBViewer card, Edision Pingulux Spark, GM Triplex, SAB Unix F+ Solo (S902),
Edision Mini High Speed 2in1, Golden Media 766, Ferguson Ariva 120, Opticum TS9600HD Prima.
Nuovi formati saranno implementati nelle prossime versioni di software.

Tutti i dati necesari alla creazione delle liste canali vengono prelevati dal nostro database
che viene costantemente aggiornato dai componenti del TechSat Team.

Come si potrà ben immaginare si tratta di un software molto complesso che ha richiesto notevoli
sforzi e tante ore di sonno perse quindi un doveroso GRAZIE è dovuto a tutti coloro che
esibiscono il logo "TechSat Settings STAFF" nella propria signature.

Come nostro costume i nostri software sono assolutamente gratuiti, questo perchè i nostri sponsor
- che ringraziamo - si fanno carico delle spese di noleggio del server ed a noi tanto basta.

Il database dei settings è un bene comune che deve essere mantenuto aggiornato anche grazie alle
vostre segnalazioni.
Chi poi volesse entrare a far parte del Team - per mantenere aggiornato il database - può farne
esplicita richiesta.
-----------------------------------------------------------------------

Attenzione!
Questo tool genera liste canali versione 0x09 e 0x0A per AZBox utilizzabili a partire dalla
versione di firmware 0.9.4923.

-----------------------------------------------------------------------

Informazione.
Le liste Pvr-ST1 e Pvr-JS1 non consentono la scrittura del nome gruppo preferiti pertanto
alcuni gruppi conterranno i canali favoriti specificati ma con titolo generico.

*************
* Changelog *
*************

Novità nella versione 2.6
-------------------------------------
° Corretta la gestione della modulazione DVB-S2 sulle liste Spark.
° Migliorata la funzione di sostituzione caratteri speciali nelle liste XML.
° Aggiunta la generazione del file DiSEqC.xml per lat/long usals nelle liste DVBViewer.
° Aumentata la dimensione dei buffers per prevenire stack overflow.
° Rimossa la gestione di SME2Plugin v1.0.
° Aggiunto satellite YAHSAT 1A (052.5E) e nuove zone DTT Italia.


What's new in version 2.6
---------------------------------
° Fixed management of the modulation DVB-S2 on lists Spark.
° Improved the function to replace special characters in XML lists.
° Adding generation of file DiSEqC.xml for lat/long USALS in DVBViewer lists.
° Increased the size of the buffers to prevent stack overflow.
° Removed the management of SME2Plugin v1.0.
° Added satellite Yahsat 1A (052.5E) and new Italian DTT zone.


TechSat Team
 
Top