DCC Dreambox Control Centre [all versions]

Status
Not open for further replies.

Brummie

Staff member
Administrator
Messages
5,794
@ all new users DCC is for FTPing and editing files on your unit as i mentioned in my new user guide to getting started.
 

Rocknroll

Staff member
Administrator
Messages
6,174
DCC v2.92

thx to Bernyr:

Neu in DCC v2.92

Settingseditor
Das Handling für Enigma2 wurde überarbeitet.
Trennlinien (Abschnitte) innerhalb Bouquets werden nicht unterstützt und durch den Editor entfernt!!!

MP3-Playlists
Shuffle (zufällige Reihenfolge) und AlphaSort (alphabetisches Sortieren) wurden hinzugefügt.
Diese Funktionen verändern die Reihenfolge in Playlists. Bitte beachten, dass die Original-Reihenfolge dabei verloren geht!

UP-/Download
Die (experimentelle) Minimize-Funktion wurde überarbeitet.
Ein minimiertes DCC bleibt jetzt erhalten und muss nach Beendigung manuell wieder hergestellt werden.

Netzwerk
Der Netzwerktest wurde auf die frühere Variante zurückgesetzt und kann jetzt zusätzlich optional deaktiviert werden ("Kein Test" unter Verbindungsart). Ist der Test deaktiviert, werden alle Verbindungen ohne Prüfung immer grün angezeigt und DCC versucht sofort eine Telnet- und FTP-Verbindung aufzubauen.

...und diverse kleinere Bugfixes
 

Rocknroll

Staff member
Administrator
Messages
6,174
Dcc 2.93

thx to Bernyr:

* DCC v2.93 (10.06.2007)

Konfiguration

* Experts: Autoconfig angepasst (Voreinstellung Pfade)
* Experts: DM600 wie DM7020 als Voreinstellung hinzugefügt
* Experts: "Lokales Verschieben erlauben" hinzugefügt

FTP-Commander

* "Lokal verschieben" im Kontext-Menü hinzugefügt. Diese Funktion ist nur sichtbar, wenn diese in Konfiguration/Experts freigegeben wurde (siehe oben). Es besteht ein hohes Risiko, da die Dateien im Quellordner gelöscht werden! Wer diese Funktion nutzt, sollte wissen was er tut!

FTP-Datentransfer

* Timeout im Datentransfer entfernt. Deshalb weniger Abbrüche bei gestörten Verbindungen (z.B. WLAN).
* Der manuelle Abbruch wurde optimiert, dass auch bei verlorener Verbindung abgebrochen werden kann.

Addon-Manager

* Korrekturen im Handling (Löschen/Einfügen)
* Anpassungen für die DM600

Settingseditor

* Korrekturen für Kabelboxen
* Anzeige des Tunertypes (Satellite/Cable) zur Kontrolle. Bitte darauf achten, dass in Konfiguration/Experts der richtige Typ eingestellt ist, da der Settingseditor sonst die Settings durcheinanderbringen kann!

Diverse kleinere Bugfixes...
 

kiliantv

Super VIP
Messages
7,057
Dreambox Control Center for Enigma2 (DCC-E2)

Betatest: Dreambox Control Center E2 (nur für Enigma2)

Auf Grund der mittlerweile zu grossen Anzahl unterschiedlicher DMM-Boxen war eine Erweiterung bzw. Anpassung des bisherigen DCC nicht mehr sinnvoll. Nachdem mir jetzt eine Enigma2-Box (DM800) seit einiger Zeit zur Verfügung steht, habe ich ein ausschliesslich für Enigma2 angepasstes DCC erstellt - eben DCC-E2. Es ist die erste Version und bisher ausschliesslich auf der DM800 getestet worden. Wie das Verhalten bei anderen E2-Boxen ist bleibt abzuwarten - aber dazu dient ja schliesslich dieser Betatest. Wer testen möchte ist dazu eingeladen, sollte sich aber der Risiken bewusst sein, die mit dem Einsatz einer noch nicht ausgereiften Software einhergehen.

Was ist neu bzw. anders als im bisherigen DCC:

Das bisherige DCC wurde um nahezu alle Enigma1-Funktionen abgespeckt und auf Basis Enigma2 völlig neu aufgebaut. Zunächst ist die Erkennung des Enigma2 und des Boxtypes von Bedeutung. Wird kein Enigma2 erkannt, kann DCC-E2 nur mit FTP und Telnet genutzt werden - alle anderen Funktionen sind zum Schutz der Box deaktiviert.

Bilder sagen manchmal mehr als Worte - deshalb hier die wichtigsten Neuerungen in Form von kommentierten Screenshots...

dcc-e2-main.jpg


no-enigma2.jpg


barry-allen.jpg


tools-kommandos.jpg


recordings.jpg


rec-edit.jpg


backup-restore.jpg


restore.jpg


editor-auswahl.jpg


settings-editor.jpg


upload-direct.jpg



Schwerpunkte des Betatests sind:

  • Grundfunktionalität
  • Bughunting
  • Verhalten im Zusammenspiel mit der DM7025 und DM8000

Sollten für die DM7025 oder DM8000 spezielle Anpassungen notwendig sein, kann ich diese mangels Box nur eingeschränkt vornehmen.

Hinweise zur Installation:
Die Zip-Datei enthält nur eine "DCC_E2.exe". Das ist OK so und mehr wird auch nicht benötigt. Es genügt, diese in das Zielverzeichnis zu entpacken. Eine eigentliche Installation findet nicht statt. Das Programm kann sofort gestartet werden und legt danach eine dcc.ini an. Einträge in die Registry werden nicht vorgenommen.
Für Backups wird nach der ersten Aktivierung ein Ordner "Backup" im Installationsverzeichnis angelegt, wo dann wiederum die namentlichen Backups mit ihrem Titel als Unterordner angelegt werden. Für direktes Editieren der Settings von der Box wird temporär ein Ordner Tmp erzeugt, der anschliessend wieder entfernt wird.

Besonderer Dank geht an...
@gutemine für das Barry Allen Tool und Hilfe bei der Integration in DCC-E2...
@Bitjumper, ohne den die Aktion nicht möglich gewesen wäre...
@ChickenRun als 'Risiko-Pilot' im Alpha-Test und jede Menge Hilfe
@Frako für reichlich Hintergrundinfos spezieller Art...
@OoZooN für das Knüpfen von Kontakten und Enigma2-Grundschule
@fpiette für seine Freeware HTTP-, Telnet- und FTP-Komponenten
(ist mir wurscht aus welchen Foren die alle kommen)

thx to BernyR
 

kiliantv

Super VIP
Messages
7,057
Dreambox Control Center E2 v1.10 (nur für Enigma2)

Auf Grund der regen Teilnahme am Betatest hat sich eine ToDo-Liste ergeben, die ich eigentlich soweit abgearbeitet habe - jedenfalls soweit es möglich war. Da ich ab Montag eine Zeit lang nicht da bin, schon mal zum Spielen eine neue Version...

Was ist neu gegenüber der Beta-Version:

1. System
- Anderes Icon
- Fenstergröße auch für Vollbild merken.
- Korrekturen an den Pfad-Settings.
- Diverse andere Bugfixes.

2. Tools / Memory-Info
- Der Speicherzustand wird jetzt für /root ausgegeben.

3. Tools / IPKG
- Hochladen und Installieren von Packages aktiviert.

4. FTP / Commander
- Es kann mit der ENTF-Taste gelöscht werden.
- Texte können jetzt mit Viewer und Editor bis 5 MByte geöffnet werden.
- Bug in Spaltenbreiten-Anpassung korrigiert.
- Schriftgröße wird erhöht, wenn das Fenster vergrößert wird.

5. FTP / Recordings
- Download-Button bleibt inaktiv bis die Liste eingelesen wurde.
- Das Löschen von Recordings ist aktiviert (Eigene Gefahr!).

6. Settings-Editor
- Altes Bouquetformat wird eingelesen, aber nur neues geschrieben.
- Jugendschutz für Bouquets hinzugefügt.
- Verschlüsselung wird letzt auch im Bouquet angezeigt.

Mit Sicherheit können nicht alle exotischen Bouquetvarianten korrekt eingelesen werden - schon allein weil ich nicht alle kenne. Für Otto-Normaluser (dazu rechne ich mich selbst auch) sollte es eigentlich reichen.

7. Sprachsystem
Erstmalig gibt es jetzt ein externes Sprachfile - es befindet sich im Unterverzeichnis \lang und enthält eine "dcce2_lang.sil". Im selben Verzeichnis befindet sich eine Setup-Datei für den Sprachen-Editor (SilEditor_Setup.exe). Wird dieser installiert, kann man mit diesem das Sprachfile bearbeiten (Doppelklick auf die *.sil oder im Programm öffnen). Es können bestehende Sprachen bearbeitet und auch neue hinzugefügt werden. Neue oder geänderte Sprachen kann man dann durch Weitergabe der *.sil veröffentlichen. Dafür ist jeder der das tut selbst verantwortlich!

DCC-E2 verwendet dieses Sprachfile, sobald er es im Verzeichnis \lang vorfindet. Man kann es durchaus entfernen oder umbenennen - in diesem Fall sind die intern compilierten Sprachen aktiv.

thx to Berny


English info:
What is new compared to the beta version:

1. System
- Other Icon
- Window size for full notice.
- Corrections to the path settings.
- Various other bug fixes.

2. Tools / Memory-Info
- The memory state is now in / root output.

3. Tools / IPKG,
- Uploading and Installing Packages activated.

4. FTP / Commander
- You can use the Delete key to delete.
- Texts can now use viewer and editor to 5 MByte open ..
- Bug in column width adjustment corrected.
- Font size is increased if the window is enlarged.

5. FTP / Recordings
- Download "button remains inactive until the list has been imported.
- Deleting Recordings is enabled (Own risk!).

6. Settings-Editor
- Old Bouquet format is imported, but only new written.
- Minors for bouquets added.
- Encryption is also in the last bouquet shown.

Certainly, not all exotic bouquet variants are correctly read - if only because I do not know all. For Otto Normal User (this, I myself also) it should be enough.

7. Voice System
First, there is now an external language - it is located in the subdirectory long and contains a "dcce2_lang.sil ". In the same directory there is a setup file for the language editor (SilEditor_Setup.exe). If this is installed, you can use this edit the language pack (double-click on the *. sil in the program or open). It can use existing languages, and also add new ones. New or modified languages can then transfer the *. sil publish. This is all the doing themselves!

DCC-E2 uses this language, when it in the directory lang finds. It can be removed or renamed - in this case, the internally compiled languages active.
 
Last edited by a moderator:

marce

VIP
Messages
7,115
DCC-E2 v1.20

DCC-E2 v1.20

livetv.jpg



Dreambox Control Center E2 v1.20 (only for Enigma2)

Actually was a bit more planned, but I am currently very time-intensive projects, and thus initially had only limited opportunities to work at the DCC. But until I return in 2-3 months had a little more time (God willing), this update should be sufficient time to bridge a bit.

What is new compared to the beta version:

Various bugfixes:
- Reboot the flash image on the BA Boot Manager should work now
- Length Limitation in title / subtitles of corrected Recordings

Autoconfig reviewed:
- Detection HDD mountpoint
- Adaptation of the recording path

Live TV Addon (Experimental) Added:
Live TV is a streaming addon to play the TV screen over the network on the PC, including remote control and EPG. Also recordings can be played ...​


System requirements for live TV:

- Only for Enigma2.
- Must be in the DCC-E2 directory (using the configuration).
- Installed VLC Version 0.9.8

WARNING: must be compatible with VLC ActiveX plugin installed!​

immaginejpg3.jpg


Live TV can DCC E2 started out, but is also run alone as long as it is from the DCC-E2-directory is executed.
Note: Double-click on the TV screen to switch to fullscreen and back again.

Live TV is still experimental. Errors in the operation are not excluded, as is the behavior with newer versions of VLC undefined. It also lacks the time to me everything in detail to describe something that is the best around - it is sometimes easier than you think ...

I'm starting today at noon again on mission abroad, and can only now and then in the forum have a look. Response to posts of mine will therefore initially somewhat sporadically fail, but you can do so amongst themselves

Thx BernyR​
 

lolo4

Senior Member
Messages
151
DCC v2.96

* DCC v2.96 (25.05.2009)

* Anpassung an das veränderte Format der recordings.epl
* Diverse kleinere Bugfixes

- Adjustments of the modified recordings.epl
- Some smaller Bugfixes

for Enigma1 box ;)

thx bernyr
 

ig0r

Administrator
Messages
7,161
Stability version for E-1
OLSO CAN USE FOR ENIGMA2
Code:
New in Version 2.95
##########################
- Timeout for password in Telnet-login added.
  More stable Telnet-login für 7025 images...
- File size in Recordings fixed.
  Is now independend on the local Windows settings...
- Save and restore windows size of the texteditor/-viewer.

Not new, but i am no found this version on SU...regards
 

iomeali

Well Known Member
Messages
3,962
DCC_1.20_IT_lang ( By blu8)

Dreambox Control Center E2_IT_lang (by blu8)

Completely revised and completed

how do:
copy the file in the program folder and overwrite the original.

And an anticipation:
at the next:

Originariamente inviata da BerniR
IMPORTANTE UPDATE DCC 1.20, blu8 tieniti pronto ...
berniR


traslate:

IMPORTANT UPDATE DCC 1.20, blu8 get ready ..


Thanks to blu8 for this great work
 

bozomustafa_68

Well Known Member
Messages
16,935
DCC-E2 v1.30

Autozoom added.
With auto zoom all the windows contents are adjusted automatically when resizing. In the first configuration page can optionally be restricted to auto zoom the font sizes in table (eg FTP) to be maintained.

dcce2_130_autozoom1.jpg


Memory Info increased to 8 mountpoints.
The memory info was increased from 4 to 8 Mount Points. To get free panels for additional mount points can alternatively dev, boot, tmp and / var hidden order.

dcce2_130_memoryinfo1.jpg


Opkg package manager for now with support.
DCC-E2 now uses the default opkg command structure of the E2-box. For compatibility reasons, may alternatively be switched to IPKG.

dcce2_130_opkg1.jpg


Setting editor corrected and expanded.
The Settings Editor now recognizes HD channels and errors in creating the bouquets were eliminated. The channel type is now displayed as separate icon (TV, radio, or HD).

dcce2_130_settings1.jpg


Live TV updated.
Live TV was adapted to the current VLC version 1.1.11.

Important notes:
The existing voice files can be used only to a limited and should be re-created as needed by the translator.

In the 'boot manager' (Barry Allen) was not changed because I am currently working without a boot manager and want to change anything at the moment my box. Whether the functionality still exists and / or current at all is still, unfortunately I can not find dehalb.

DCC-E2 is at least on my test system running Windows 7 - 64 bit without problems. Almost all previously reported connection issues were due to incorrectly configured software firewalls or network settings.

I own only one DM 800 SE - on other boxes I can not test themselves.
Thx to BernyR
 

baha2

Super VIP
Messages
6,530
DCC-E2 v1.40

DCC-E2 v1.40

Support dFlash *. nfi Image Backup
It is now one of the current backup *. nfi images are created in Flash.
To use this function must be the plugin "dFlash" of gutemine be installed on the box!

20b1dev.jpg


The backup image is always created first on the box (the target directory and can optionally
be downloaded to the PC. Upon request, then the backup on the box is cleared.

The path for the backup on the box and will download to a PC and stored in the configuration are set automatically the next time.

Restart Enigma 'send tools / command' to add
This command only starts the GUI, so Enigma (2) new.

2r7q5ar.jpg


Sorting function, and 'Keep Selection "added for packages
The ipkg / opkg packages can now be sorted by clicking on the column header. In addition to the previously selected entry will now jump back, if after you install or remove a plugin, the table is re-read. Reloading is necessary in any case, since DCC can not even detect whether dependent packages have been installed.

Left menu items now part of the resources
These can also be translated into other languages​​.
You can find these strings in the language file in the [strings] and start with 'menu ...'.

Download Recordings optional inclusive *. eit
Together with Recordings can each be associated *. ince downloaded optional.
The setting is saved and automatically restored after restart.

2wqx65c.jpg


bugfixes
- The box type was sometimes not properly recognized or incompletely
- Sorting of Records had no function
- Set to 'Active / Passive FTP' had no effect on FTP2 for background actions
- If the query "delete file, are you sure?" terminated with Escape, the file was deleted anyway.
- Improper alignment of the input field for the IP address of the box
 

baha2

Super VIP
Messages
6,530
DCC-E2 v1.41

Image Backup adjusted current dFlash 0101
Gutemine has specially created a new version, because before all the commands were language-dependent and the backup feature of the DCC-E2 therefore only in German-speaking world worked. Now it should run independently of the language set on the box.
Be dFlash 0101 must be installed on a Box: IMPORTANT!

Fixed bug in the Active FTP
Due to an error, it was not possible to build up in the 'Active' mode FTP connection through a router from outside the box.
 

hilton

Well Known Member
Messages
7,622
DCC-E2 v1.42 (03.10.2011)

Image Backup überarbeitet
Es wird nicht mehr das Webinterface des dFlash verwendet, sondern DCC-E2 ruft die Binaries des dFlash direkt über einen Telnet-Script auf. Das dFlash-Plugin muss also weiterhin installiert sein, doch die Ausführung ist jetzt nicht mehr abhänging vom jeweiligen Browser und sollte zuverlässiger funktionieren. Allerdings wurde es (noch) nicht mit der aktuellsten Enigma2 und der letzten dFlash-Version getestet (habe es selbst noch nicht installiert).

Bug-Fixes
- Ausrichtung des Eingabefeldes für die Box-IP war nicht korrekt nach Änderung der Fenstergröße.
- Die Größe der Panels in Recordings wurde nach Änderung der Fenstergröße nicht korrekt gezoomt.
 

Serjoga

Latvian satfat
Staff member
Moderator
Messages
6,062
Dreambox control centar DCC ver 1.42

Dreambox control centar DCC ver 1.42 Croatia language!
 
Status
Not open for further replies.
Top