EMU Firmware C-Tech HD (5000/5000C)

vegeku90

Registered
Messages
1,586
25.06

New 143p


Code:
- N D S card support, Digi*TV 1West Au fixed , major fixes

But in case of NDS3 card,  should input the box serial in the key edit menu.
(When you press the yellow key in the key edit menu, the box serial input window will pop up.) > pdf file

- setting via rs232 > use the new ctechup 191 ! Firmware > bigger file size !!

concerning the bigger file size (firmware) > if you want make a downgrade > use downgrade file !!!

[B]0/\0_Yabbervox_0/\0[/B]
 

k@lkov

Super VIP
Messages
10,003
Firmware Clarke-Tech

Code:
fix for not working taping on External HDD or DVD

Problem got nown from 1.47P
 

kiliantv

Super VIP
Messages
7,057
New 151p For CTECH 5000/5000C/5000Plus

Code:
prem!ere st*r fixed. - Yabbervox -
 
Last edited:

tani1

Staff member
Super Moderator
Messages
17,767
Firmware Clarke-Tech

CTECH5000CPlus_152p_beta

Code:
[B]added cardsharing[/B]

1.) Cardsharing via network/LAN : Currently Newcamd only supported.

secret menu => Press 8-2-8-1 ( it will appear the "LAN sharing" menu ).

!!! Please set the server’s information in menu => press connect button (Yellow Key)

 

2. ) Cardsharing via RS232 serial – Currently SSSP and Dongle only supported.

"Mainmenu" => "Installation" => "Option" => Select at  "OFF / SSSP / DONGLE"  Sharing Mode

DONGLE > only north america area !!

****>NOTE : THAT IS A BETA VERSION !! <<< 

MORE COMING SOON AS POSSIBLE ( also for the other HD5000 models )

- Yabbervox -
 

REDHOU

Registered User
Messages
486
Firmware for Clarke Tech 5000/5000C/5000C PLUS

version 153p

-. "Rai" emu was fixed (on Hotbird 10992V)
-. new option menu with sssp mode
-. added Viasat package: Sirius 4.8E
TV 3 Sverige Stockholm/TV 3 Norge/TV 3 Danmark/TV 6 Sverige/NRK 2 TV 3+
Viasat 4/SVT2 Nordnytt/ZTV (Sweden)/TV 3 Sverige/TV 3 Sverige Öst/TV 7 (Sweden)
TV 2 Fyn/TV 2 Bornholm/SVT 1/TV3 Norge/TV3 Denmark/TV6/DR1/DR2
thanks to Yabbervox -
 

tani1

Staff member
Super Moderator
Messages
17,767
Firmware Clarke-Tech (5000/5000C)

Version with emu

* canal digitaal seca3+seca2 card support fixed
* newcamd will support n*d*s
* filter in option sssp

++ Yabbervox ++
Please make factory set after S/W update !!
 

tani1

Staff member
Super Moderator
Messages
17,767
New 162p for Clarke-Tech (5000/5000C)

Version with emu

Seca card updating problem fixed Note: TV Vlaanderen/Canal+ NL send not on all frequencies updating data !
Updating data OK on ASTRA > 12343 H 27500 TV Vlaanderen, Canal+ NL and 12515 H 22000 ---> Canal+ NL
--------------------------------------------------------
RAI4 emu fixed.
--------------------------------------------------------
Biss channels, audio problem fixed.
--------------------------------------------------------
JSC Sports 1+2+3+4 emu fixed.
--------------------------------------------------------
Added PremIere N*D*S V13 smartcard support
--------------------------------------------------------

++ Yabbervox ++
:thum:
 

tani1

Staff member
Super Moderator
Messages
17,767
This firmware reposted again because it is deleted wrongly.
Firmware CTECH5000C/Plus (with emu)

audio aac + patch !!!
example > TDT em Portugal,.. etc.
++ Yabbervox ++
 

tani1

Staff member
Super Moderator
Messages
17,767
New 179p for Clarke-Tech (5000/5000C)

Version 179p with EMU

- Only patched, no keys updated, no digi tv au !!
- To build whole s/w with new structure is in process
++Yabbervox++
 

tani1

Staff member
Super Moderator
Messages
17,767
Firmware CTECH5000-C-Plus 204p (Emu)

Release notes:

- Added cccam client
- Fixed emu JSC sports on Nilesat
- DigiTv on Thor
- TvGlobo on Hotbird
- RAI on Hotbird (by softcam seca key)
- KingSton on Sirius
- SABC on Intelsat 902,KDG

Update steps!!

1.Download software first wait until reboots.
2.Download module_002p wait until reboots.
3 Save your settings by USB or rs232
4.Make a factory reset and switch OFF (maunpower switch on the rear)the receiver for around 1 minute.
5.Receiver again turn on ,make an auto channel scan or upload the saved settings and make auto channel scan to upgrade the channellist etc...

Now you can also used hidden menu 8281 !!
More info about 8281 in the pdf document !

Info about new s/w core(Ver. 2.0x for HD5000c plus

1. Two channels recording at the same time and another channel watching.
2. Even though they are encrypted channels, they will be descrambled simultaneously.
3. During recording or watching satellite channels, the terrestrial channels can be watched or recorded, and vice versa.
4. In case of simulcrypted channels, all ecm’s of each slot (cards/cs/sssp/emu) will be processed in parallel, so that the channel open time will be shorter than old versions.
The old core tried ecm’s one by one in every 3 sec, so that at the worst case the channel open time is very long.
And they do not process all possible ecm’s, so some channels does not open.)
5. The size of old core software is very big. No more free space in flash memory to add the new features.
In this case the new software is compressed to half size and the booting time is same as old one.

++Yabbervox++
 

tani1

Staff member
Super Moderator
Messages
17,767
Firmware CTECH5000-C-Plus

Downgrade s/w for only patched s/w 2.0xp

This s/w includes old version boot loader (less than boot loader version 3.00)

So you go from version 2.0x back to version 1.80 . In this case can install older version again

++Yabbervox++
 

tani1

Staff member
Super Moderator
Messages
17,767
Firmware CTECH5000-C-Plus 205p (Emu)

CS Bugs fixed - Newcamd for nagra, Long time connection problem fixed


To use cccam:
added cccam client

1.Download software first wait until reboots.
2.Download module_002p wait until reboots.
3 Save your settings by USB or rs232
4.Make a factory reset and switch OFF (maunpower switch on the rear)the receiver for around 1 minute.
5.Receiver again turn on ,make an auto channel scan or upload the saved settings and make auto channel scan to upgrade the channellist etc...

Now you can used ccam client in hidden menu 8281 !!

++Yabbervox++
 

MIKAME

Super VIP
Messages
5,429
Clarke Tech 5000 HD Fix Sky Italy

Log Modus F16 New Firmware 007 for FW Clarke Tech 5000 HD Combo Plus
Both Fix Italy Sky Card with 0919 than with 093b

Warning! Mediaset not read card

Nor has the Italian language in the menu

FW is not the usual team, so do not say "official"

PS. must change the boot attached boot_HTM8000_7109


TESTED OK:thum:
 
Last edited:

vegeku90

Registered
Messages
1,586
New firmware for Ctech 5000hd boxes

Code:
S*k*Y-Italy *n*D*s***9_1_9**9_3_b**f_i_x_e_d 
S*C*T emu 11727/hotbird
Note: Tivusat smartcard support in process. also S*k*Y-Italy *n*D*s***9_1_9**9_3_b* fix for HD5000 and HD5000C !!!
+++Yabbervox+++

Vegeku 90
 

Verdeoro

VIP
Messages
1,522
EMU Firmware C-Tech HD (5000/5000C)

S*k*Y-Italy *n*D*s***9_1_9**9_3_b**f_i_x_e_d
S*C*T e m u 11727/hotbird

+++Yabbervox+++
 
Last edited:

tani1

Staff member
Super Moderator
Messages
17,767
EMU Firmware C-Tech-C-Plus 208p

- Reboot problem fixed

+++Yabbervox+++
 
Top