The final B8hx030000h CSA-RBT v2 table is online now.

Messages
44
The final B8hx030000h CSA-RBT v2 table is online now.

You can find the mega.nz linklist for the zipped table here:
http://colibri-dvb.info/ -> CSA-Rainbow-Table

I have tested the success rate with 1000 crypt8 values (generated via random list number 1).
Success rate: 84.6% (846/1000 found)

I have used PowerArchiver 2013 to compress the files. It seems other unzip tools are showing an error message
after the unzip, but the unzipped files may be still correct. So after verifying the MD5 checksums of the zipped
files you should also verify the MD5 checksums of the unzipped RBT2 files that I have included additionally at
the end of the file. You can also use the PowerArchiver 2013 or newer version to unzip the files then no error
message after the unzip will be shown if the input files are vaild.

As I have seen with my other mega.nz links you will likely get a message that some links temporary offline
(instead of permanently offline). As it turned out they were online after a few days again. So just try again later.
 

Dave5118

Feed Hunter
Messages
1,146
You're an absolute star colibri m8, just lost a 3TB HDD last week with my 00h & 030000h V2 tables on it. Nearly finished redownloading the 00h, and wasn't looking forward to downloading the 030000h from the newsgroups again :eek:
Your 'mega' links have been 100% ok for me :)
:D
 

nkyaadog

Registered
Messages
2
CSA_B8hx030000h_1000h_D5FFFFFCh_EB666661h.z07 is corrupted. Downloaded it many times, and each time I get the same wrong MD5. Please re-upload.
 
Messages
44
CSA_B8hx030000h_1000h_D5FFFFFCh_EB666661h.z07 is corrupted. Downloaded it many times, and each time I get the same wrong MD5. Please re-upload.
I have downloaded of the original file
_https://mega.nz/#!iFxBxB4a!mO27DN8jOXU38uXCbQo2Gv-n5JNrW9Sa8TB8e2OtdSY
and the md5 was fine (3f3bbb9c34ba89463aa155777f0dfe74), so the file is ok.

Nevertheless if have reuploaded it for you, so that you can test it (same md5):
_https://mega.nz/#!bBdThBSA!7TPworRDQBPWdEA-oqCOODhiPrFAC9PKZOxREqwWlwc
 

yakudi

Registered
Messages
123
Colibri.DVB i has try use V2 tool with your table, but this tool have problem with me. when i choose search CW setting--Start, info show" Stopped" soon. i checked all manual by your website, but still have this problem with me. any person can help me?


thanks



 

maxi_c_v8

Registered
Messages
21
Colibri.DVB i has try use V2 tool with your table, but this tool have problem with me. when i choose search CW setting--Start, info show" Stopped" soon. i checked all manual by your website, but still have this problem with me. any person can help me?


thanks




i have the same problem :( if you get the solution , let my know
 

serkanguzel

Registered
Messages
1,442
I have downloaded of the original file
_https://mega.nz/#!iFxBxB4a!mO27DN8jOXU38uXCbQo2Gv-n5JNrW9Sa8TB8e2OtdSY
and the md5 was fine (3f3bbb9c34ba89463aa155777f0dfe74), so the file is ok.

Nevertheless if have reuploaded it for you, so that you can test it (same md5):
_https://mega.nz/#!bBdThBSA!7TPworRDQBPWdEA-oqCOODhiPrFAC9PKZOxREqwWlwc

CSA_B8hx030000h_1000h_D5FFFFFCh_EB666661h.z07 part file ;
New link ;
_https://mega.nz/#!OVQFFZxb!BNfJmNDcSZ2Rg478qljZmoVVeogKAk6liZ_UwBm0W2U
 

Chycho Py

Feed Hunter
Messages
7,818
Good afternoon everyone, could you please help. Download the V1 from the B8hx030000 Table (http://colibri.bplaced.net/linklist_B8hx030000.txt) which has 30 links, I can only download 15 because I do not have enough space, when I unzip it throws a file of 100 gb about bxhx3000 table1 .RBT, however does not find any key so far and throws this message at the end :

Calc all 10000h end values for this crypt ... (using file cache)
Search end values in RBT ...
Searching CW in RBT ...
ERROR: FindCw6EndAndGetCs6StartFromSortedFile failed
 

geor21

Donating Member
Messages
231
Good afternoon everyone, could you please help. Download the V1 from the B8hx030000 Table (http://colibri.bplaced.net/linklist_B8hx030000.txt) which has 30 links, I can only download 15 because I do not have enough space, when I unzip it throws a file of 100 gb about bxhx3000 table1 .RBT, however does not find any key so far and throws this message at the end :

Calc all 10000h end values for this crypt ... (using file cache)
Search end values in RBT ...
Searching CW in RBT ...
ERROR: FindCw6EndAndGetCs6StartFromSortedFile failed

You must download all parts
 

abed1988

VIP
Messages
5,431
hello i have dowlond b8x030000 v2
CSA_B8hx030000h_1000h_00000000h_15666665h.z01 to CSA_B8hx030000h_1000h_00000000h_15666665h.z18

i have this probleme

i can not unzip file

150020161241.png
 

OpenFox

VIP
Messages
1,416
Hello @abed1988, You need check Checksum downloaded file and Checksum of the file in Colibri site,and if they do not match, then you need to download it again;)
 
Last edited:

FaDeL®

Staff member
Super Moderator
Messages
7,346
@abed1988
HashTab V6
Very easy Very Fast to get MD5
Do like PIC Then compare MD5 checksums
https://s26.postimg.org/3o6zl9dk9/03000h.png
All parts must be match With MD5 checksums in colibri Page
If different Redownload again This Part Until the match MD5 Done
Finally, unzip With PowerArchiver & WinRAR
Good Luck :)
 

dahaka

Registered
Messages
700
It seems other unzip tools are showing an error message
after the unzip, but the unzipped files may be still correct.

Winrar 5.50 fixed this problem .
verifying the MD5 checksums of the zipped
files you should also verify the MD5 checksums of the unzipped RBT2 files that I have included additionally at
the end of the file.
Found this useful tool Md5Checker Version 3.3 http://getmd5checker.com/downloads/Md5Checker/3.3.0.12/Md5Checker.zip http://getmd5checker.com/images/screenshots/en/main_window_full.gif http://getmd5checker.com/images/screenshots/en/compare_md5_1.gif http://getmd5checker.com/images/screenshots/en/compare_md5_2.gif
 

minrut

Donating Member
Messages
155
Hi

Last night I failed to find the CW with B8hx030000h CSA-RBT v2 table. My system to brute biss key is all Rainbow tables and Asus DUAL-GTX1070-O8G. Usually I get the keys with this system, but tonight I couldn't brute the CW although I had Crypt8
keys. Rainbow Tool just didn't found it. But someone did it successfully. Sent me CW in PM. So what I am doing wrong, maybe we have different Rainbow tables? Or something else?

Thanks for your answer.
 

Martin.Wigston

Registered
Messages
969
Hi

Last night I failed to find the CW with B8hx030000h CSA-RBT v2 table. My system to brute biss key is all Rainbow tables and Asus DUAL-GTX1070-O8G. Usually I get the keys with this system, but tonight I couldn't brute the CW although I had Crypt8
keys. Rainbow Tool just didn't found it. But someone did it successfully. Sent me CW in PM. So what I am doing wrong, maybe we have different Rainbow tables? Or something else?

Thanks for your answer.

They probably have V1 tables they have a much higher hit rate than V2, I choose to use V1 for that reason, speed is not so important to me.
 

BLACKCRUSADER

Senior Member
Messages
1,977
Does anyone know if the CSA Rainbow Table Tool 1.23 software can take advantage of using two GPU for processing the Crypt and CW?

So if it was possible I might do two x 4SSD on RAID 0 and Two GTX 1080 TI Nvidea Cuda cards for V1 processing.
 

sss146

Registered
Messages
47
BLACKCRUSADER
No. You can use only single selected GPU.
At the moment the only way to reduce processing time is software optimizations.
 
Top