Incubuscamd Client for Octagon SF1018 Aliance

k@lkov

Super VIP
Messages
10,003
Code:
08/09/2009

[B]Important!!!![/B]	
Upgrading from V0.92 is essential to replace ALL files except incubusCamd.conf

[B]Instructions:[/B]
1. Make a connection to the receiver through an ftp client 
(f.e. FileZila, Samba) (User: root, no password)

2. Upload the files in the appropriate folders !
The files  /var/bin/incubusCamd.sh4 and /var/etc/start.sh 
have to own the rights 755 ! (chmod755)

3. Now you have to edit the file /var/keys/incubusCamd.conf ! 
Please enter your CCam server there !
You can enter unlimited lines !
(Just the CCam Server (2.1.2) is tested until now, 
other softcam server will follow soon.

4. The box should be rebooted now.
With the key sequence --> menu-->red => you can start the Camd 
through the remote control 
With the key sequence --> menu-->blue => you can stop the Camd 
through the remote control 

Because of unknown reasons it can happen, that on some HD channels 
just the audio is encrypted and that there is no picture.

In that case you can help yourself by switching the language 
with the yellow button!!


[B]!!!!!IMPORTANT!!!!!![/B]
By now you can  install and run only one softcam on the box !!!
If you have installed more cams, you have to change only /var/etc/start.sh 

The remaining files don’t have to be deleted each time.

[B]Changelog:[/B]
incubusCamd.sh4 V0.93 
Renewal of incubusCamd.prio --> faster Switching
Renewal of start.sh --> Directory  /var/run  must no longer be created!!

Incubuscamd adapted to octagon SF1018 Aliance by Boxcracker and CTHT
 

marcel

Super VIP
Messages
2,166
Incubus 0.9.4 Octagon SF1018 HD Alliance

Incubus 0.9.4 Octagon SF1018 HD Alliance
 

elgeneral

Well Known Member
Messages
7,811
Incubuscamd Client V0.9.5 für Octagon SF1018 Aliance

Incubuscamd Client V0.9.5 für Octagon SF1018 Aliance

!!!!!WICHTIG!!!!!
Bei Update von V0.92 müssen unbedingt ALLE Files ausser incubusCamd.conf ersetzt werden!!

Anleitung:
1, mit einem FTP Programm (zbs. FileZila,SAMBA) eine Verbindung zur Box aufnehmen! (User: root, kein Passwort!!)
2, Lade die Dateien in die entsprechenden Ordner hoch!
Die Dateien /var/bin/incubusCamd.sh4 und /var/etc/start.sh müssen unbedingt die Rechte 755 besitzen! (chmod755)
3, Ihr müsst nun die datei /var/keys/incubusCamd.conf editieren! Tragt dort euren CCcam Server ein!
Es können unendlich viele Lines eingetragen werden!!
( es wurde bis jetzt nur CCcam Server (2.1.2) getestet, andere Softcam Server folgen aber in Kürze.)
4, Jetzt sollte Box rebootet werden.

Mit den Tastenkombinationen --> Menü-->rot kann das Camd per FB gestartet werden.
Mit den Tastenkombinationen --> Menü-->blau kann das Camd per FB gestopt werden.

WEBINTERFACE:
http://box-ip:668

Aus bis jetzt noch ungeklärten Gründen kann es vorkommen, dass bei einigen HD Kanälen nur Ton und kein Bild entschlüsselt wird!
In diesem Fall kann Abhilfe geschaffen werden, in dem man mit der gelben Taste die Sprache paar mal umschaltet!!

!!!!!WICHTIG!!!!!!
Der Cardreader muss im CAS Menü ausgeschaltet sein!!
Zur Zeit kann immer nur EIN Softcam auf der Box installiert und betrieben werden!!!!
Wenn ihr mehrere cams installiert habt, muss aber immer nur /var/etc/start.sh ausgetauscht werden!!
Die restlichen Dateien müssen nicht jedesmal zwangsläufig gelöscht werden!
 

elgeneral

Well Known Member
Messages
7,811
Incubu 0.9.7-B Octagon SF1018 SF1008 HD 23-03-2010

- Fix. mit 10797
- Start_incu eingebaut (add.)
- Aufnahme fix. (Record)
- PTi anpassung zu 10797 (PTI adjustment)
- incubusCamd.conf fix.


---> Menu - Sonstiges - Plugin : Start_incu mit grüne taste starten
---> Menu - Utiliety - Plugin : Pls start Start_incu with green button


Gracias a Octagon88
 
Top