Oscam and t@ndberg

N

n3ur0

Donating Member
Messages
60
Robinson74 said:
I did that.
Here are my 2 readers:

Code: 
[reader]
label                         = emulator
protocol                      = emu
device                        = emulator
services                      = 0d00_emu,0d02_emu,093e_emu,0604_emu,007400_emu,023800_emu,030b00_emu,ant1_emu,powervu_emu
localcards                    = 0D00:000000,0000C0;0D02:000000,0000A0;093E:000000;0500:023800,030B00,021110,007400;0604:000000;0E00:000000
caid                          = 0D00,0D02,093E,0500,0604,0E00,1010
detect                        = cd
ident                         = 0D00:000000,0000C0;0D02:000000,0000A0;093E:000000;0500:023800,030B00,021110,007400;0604:000000;0E00:000000;1010:000000
group                         = 1
emmcache                      = 1,1,2,1
audisabled                    = 1

Code: 
[reader]
label                         = biss_emu
description                   = constantcw
protocol                      = constcw
device                        = /usr/keys/SoftCam.Key
services                      = biss_emu
localcards                    = 2600:000000
caid                          = 2600
ident                         = 2600:000000
group                         = 2
audisabled                    = 1

Is there something wrong with them?
Should I also include 1010 in "localcards"?

By the way, can someone please suggest better entries for BISS and other system emulators?
Click to expand...

Code: 
[reader]
label                         = emulator
protocol                      = emu
device                        = emulator
caid                          = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect                        = cd
ident                         = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group                         = 1
emmcache                      = 2,1,2,1
emu_auproviders               = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,000014,0000FE
audisabled                    = 1
and nothig more..
 
D

djakac9

Registered
Messages
76
to me it is all the same but does not open I guess I have the wrong format keys, somebody set the frequency and the keys verified working with him not to bother so
 
N

nautilus7

VIP
Messages
607
In my xtrend 4000 it opens, but with a lot of breaking in the picture, like as if there not enough signal (but THERE IS - signal is very good). I use satdreamgr image.
 
G

goofy115

Registered
Messages
76
Robinson74 said:
Tandberg doesn't work for me.
Perhaps it's a question of my oscam emu binary.
I'm using this one:
oscam_1.20-rev-11271-Pli-4.0-emu from here:
http://www.sat-universe.com/showpost.php?p=2036683941&postcount=453
It is only 0.8 MB. Should it work for me on OpenPLi 4.0?
Click to expand...

Hi mate,
Im using an openpli 4.0 image on my dm800se and i can confirm it works with oscam 11271.The version that i have installed and working is oscam_1.20-rev-11271-oe2.0-emu .Once installed you just need to set up your oscam.server file and add the keys toy your softcam.
 
Last edited:
C

chelo71

Super VIP
Messages
1,657
goofy115 said:
Hi mate,
Im using an openpli 4.0 image on my dm800se and i can confirm it works with oscam 11271.The version that i have installed and working is oscam_1.20-rev-11271-oe2.0-emu .Once installed you just need to set up your oscam.server file and add the keys toy your softcam.
Click to expand...

You can put as he edited the oscam.server files?
the softcam which folder should be put?
 
D

djakac9

Registered
Messages
76
softcam (oscam emu) goes to usr / bin and other files go into the etc / tuxbox / conf. / oscam with softcam key,but believes still not open,somebody set the frequency and the keys verified working with him,thanks
 
G

goofy115

Registered
Messages
76
djakac9 said:
softcam (oscam emu) goes to usr / bin and other files go into the etc / tuxbox / conf. / oscam with softcam key,but believes still not open,somebody set the frequency and the keys verified working with him,thanks
Click to expand...
You can put the softcam in whatever folder you want as long as you tell oscam.server where it is.Centre court 10972h 9874 3/4 is open as i type with the current key.
 
D

djakac9

Registered
Messages
76
that is the real key to this, otherwise PowerVu works great on openpli 4.0 Dreambox 800 but this will not
 
G

goofy115

Registered
Messages
76
chelo71 said:
photo?
Click to expand...
[reader]
label = oscam_emu
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000 ;4AE1:000000 ;1010:000000
group = 1
blockemm-g = 1
 
C

chelo71

Super VIP
Messages
1,657
goofy115 said:
[reader]
label = oscam_emu
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000 ;4AE1:000000 ;1010:000000
group = 1
blockemm-g = 1
Click to expand...

I have the softcam in etc / tuxbox / config. but the 10972H9874 feed does not open?
 
G

goofy115

Registered
Messages
76
chelo71 said:
I have the softcam in etc / tuxbox / config. but the 10972H9874 feed does not open?
Click to expand...
In the oscam.server file have you got it set up as follows? (ie telling oscam the softcam is located in the config file)
[reader]
label = SoftCam.Key
protocol = constcw
device = /etc/tuxbox/config/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8 ,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000; 0500:000000,030B00,023800,021110,007400,007800;1801:000000,0 07301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000 ;4AE1:000000;1010:000000
group = 2
 
D

djakac9

Registered
Messages
76
to me it is all the same to me does not open


[reader]
label = oscam_emu
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,0000FE,4AE1:000000,0500:041200,0500:024700,1010:000000
group = 1
emmcache = 1,3,2,0
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,0000FE

[reader]
label = SoftCam.Key
protocol = constcw
device = /etc/tuxbox/config/oscam/SoftCam.Key
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,0000FE,4AE1:000000,1010:000000
group = 2
emmcache = 1,3,2,0
emu_auproviders = 0500:030B00;0604:010200;0E00:000000;4AE1:000011,0000FE

[reader]
label = constant.cw
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,0000FE,4AE1:000000,1010:000000
group = 3

[reader]
label = oscam.keys
protocol = constcw
device = /etc/tuxbox/config/oscam.keys
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000,1010:000000
group = 4

[reader]
label = constant.cw
protocol = constcw
device = /usr/keys/constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000,1010:000000
group = 5

[reader]
enable = 1
label = SERVER--NEWCAMD--1
protocol = newcamd
device = xxxxxxxxxxxxxxxxxxxxxxxx
key = 0102030405060708091011121314
user = xxxxxxxxxx
password = xxxxxxxxxxx
inactivitytimeout = -1
disableserverfilter = 1
group = 1
emmcache = 1,3,2,0
dropbadcws = 1

[reader]
enable = 1
label = SERVER--NEWCAMD--2
protocol = newcamd
device = yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy
key = 0102030405060708091011121314
user = yyyyyyyyy
password = yyyyyyyyyy
inactivitytimeout = -1
disableserverfilter = 1
group = 1
emmcache = 1,3,2,0
dropbadcws = 1

[reader]
enable = 1
label = SERVER--NEWCAMD--3
protocol = newcamd
device = zzzzzzzzzzzzzzzzzzzzzzzzzzzz
key = 0102030405060708091011121314
user = zzzzzzzz
password = zzzzzzzzzz
inactivitytimeout = -1
disableserverfilter = 1
group = 1
emmcache = 1,3,2,0
dropbadcws = 1

[reader]
enable = 1
label = SERVER--NEWCAMD--4
protocol = newcamd
device = wwwwwwwwwwwwwwwwwwwwwwww
key = 0102030405060708091011121314
user = wwwwwww
password = wwwwwwwww
inactivitytimeout = -1
disableserverfilter = 1
group = 1
emmcache = 1,3,2,0
dropbadcws = 1
 
You must log in or register to reply here.
Top