VU+ Control Centre

Status
Not open for further replies.

juli13

Staff member
Administrator
Messages
10,194
16/09/2010

Code:
[B]VU+ Control Centre Version 0.1 Beta by Lee Hudson 
[/B]
[B]Known Bug:[/B]
Media Files Manager

Transferring MKV files over 2GB causes the Progress Bar to become inaccurate.
Don't worry if the progress bar gets to 100% goes blank and the "Please wait file message" 
still appears.
Just leave the app running as it's still transferring the file. Once the file has completed 
transferring you'll see the filename appear in the Remote or Local file list window respectively.
It can take a while to complete if your uploading or downloading a very large MKV file.
-------------------------------------------------------------------------------------------------------------------------------------------------------
A quick VuCC Video guide is available on Youtube
_http://www.youtube.com/watch?v=2wvopTTwmhY"]YouTube        - Vu+ Control Centre for Vu+ Duo HD and Vu+ Solo HD
-------------------------------------------------------------------------------------------------------------------------------------------------------

[B]Installation Instructions[/B]
------------------------------------
Unzip all the files and folders in the zip file to your local hard drive.


[B]How to Use VUCC[/B]
-----------------------------
1. Run the VUCC.exe application.
2. Enter the IP address of your Vu+ in the IP Address field, example 192.168.1.5
3. If you have changed the password on your receiver, enter the password in the password field 
otherwise leave blank.
4. Click Connect Button


[B]Telnet[/B]
---------
Self explanatory.
For a list of Busybox commands check out the following website:
[url]http://www.busybox.net/downloads/BusyBox.html[/url]


[B]FTP[/B]
----
Click the FTP Button.
This will load FileZilla FTP Client and automatically connect to your Vu+
For instructions on using FileZilla check out the following website:
[url]http://wiki.filezilla-project.org/Using[/url]


[B]Settings Backup[/B]
-------------------------
Click on Settings Backup Button.
Click the Backup Settings Button.
This will backup all the settings from the Vu+ to the /enigma2 and /tuxbox folders on your PC HDD.
The /enigma2 and /tuxbox folders will be located in the same folder as this program.

Click the Restore Vu+ Settings Button.
All your backup data will be restored to the /etc/enigma2 and /etc/tuxbox folders on the Vu+
Once the files have successfully been restored you'll need to reboot the receiver by powering off 
and on using the switch on the back of the receiver.


Media Files Manager
---------------------------------
Uploading a Media File.
Select the Hard Drive and folder that contains your Media File.
Select the PVR device you have installed from the "Choose PVR Device" drop down window.
Click on the Local file you want to upload so it's highlighted in blue.
Click the Upload Button to transfer the file from your local HDD to the Vu+.

Downloading a Media File.
Select the Hard Drive and folder that you wish the file to be transferred too.
Select the PVR device you have installed from the "Choose PVR Device" drop down window.
Click on the Remote file you want to download so it's highlighted in blue.
Click the Download Button to transfer the file from the Vu+ to your local HDD.

Deleting Local File
Select Local file so it's highlighted in blue.
Click Delete Local File Button.

Deleting Remote File
Select remote file so it's highlighted in blue.
Click Delete Remote File Button.


[B]Vu+ HDD Manager[/B]
------------------------------
To mount and format a Hard Disk Drive do the following:
Select the receiver type and Hard Disk type.
Click the Format Button.
 

juli13

Staff member
Administrator
Messages
10,194
Vu+ Control Centre Version 0.2

------------------------
Version 0.2 Released 30-9-2010
  • Fixed Progressbar issue in Media Files Manager.
  • Added Channel List Uploader.
  • Added Auto save login details when application is closed.
  • Added User definable ports for FTP, Telnet, WebPanel.
  • Note: Leave the default ports as they are unless you've altered the default ports on Vu+.
 

elgeneral

Registered
Messages
7,811
VuCC VU+ Control Centre Version 0.3








VU+ Control Centre Version 0.3 Beta by Lee Hudson - Goldwafers

Installation Instructions
-------------------------
Unzip all the files and folders in the zip file to your local hard drive.


How to Use VUCC
--------------------
1. Run the VUCC.exe application.
2. Enter the IP address of your Vu+ in the IP Address field, example 192.168.1.5
If your using a private local IP address enter the IP like this: 010.000.000.001
3. If you have changed the password on your receiver, enter the password in the password field
otherwise leave blank.
4. Click Connect Button


Version 0.3 Released 11-7-2011

Added IPK Installer.
Fixed Telnet paste issue. You can now use CTRL V or Right Mouse Button to paste code from clipboard to Telnet Window
 

juli13

Staff member
Administrator
Messages
10,194
Version 0.4 Released 28-11-2011


  • Added Driver Manager. Now you can backup drivers and download and install new drivers in just a couple of clicks.
  • Updated Media Files Manager. Now you can upload or download multiple media files to and from the receiver.
  • Updated Settings Backup.


vucc041.jpg


vucc042.jpg


vucc043.jpg
 

juli13

Staff member
Administrator
Messages
10,194
Version 0.5 01-01-2012

Updated Driver Manager to support new images using Kernal 3.1.1
Added filter to Driver Manager so drivers are only listed for the correct image kernal.
Updated: Drivers are now listed in release order meaning the newest driver is always displayed at the bottom of the list.
 

juli13

Staff member
Administrator
Messages
10,194
Vu+ Control Centre V0.6

Code:
 Updated Driver Manager to support Vu+ Solo2
 
Status
Not open for further replies.
Top