Go Back   Sat Universe > HDTV > Cuberevo - Ipbox 9000 > Cuberevo - Ipbox 9000 Chat

Note: Visitors from certain countries might see in-text advertising(underlind words in posts) or slide-in ads.
It is only shown to unregistered visitors or members that haven't made any posts. So you can easily get rid of it.

Loading...

whats best stable E2 image for ipbox 9000hd

Cuberevo - Ipbox 9000 Chat

Reply
  #11  
Old 08-04-2016, 00:58  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
daxv8 daxv8 is offline
Senior Member
 
Join Date: May 2009
Posts: 152
Thanks: 22
Thanked 14 Times in 14 Posts
Country: Country Flag
Default

Keep with it as once you have it working the box is stable and good .
Reply With Quote
  #12  
Old 31-05-2016, 17:56  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
valparra valparra is offline
Member
 
Join Date: Apr 2016
Posts: 22
Thanks: 3
Thanked 0 Times in 0 Posts
Default

Hi cybercypher
Just been reading your thread and as this is something l am keen to do, upgrade from PGI 1.5.1 to E2 Can you advise if this worked using the flash / usb E2 version and which image did you use
Thanks

Last edited by valparra; 31-05-2016 at 18:02..
Reply With Quote
Sponsored Links
  #13  
Old 31-05-2016, 19:33  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
tarvi47's Avatar
tarvi47 tarvi47 is offline
Member
 
Join Date: Jun 2008
Posts: 13
Thanks: 0
Thanked 4 Times in 2 Posts
Country: Country Flag
Default

Hi!

I use PKTeam Polish Hyperion, based on OpenPli. Stable and good.
http://e2.pkteam.pl/index.php?dir=IM.../Hyperion_5_3/

Needs registration.

Best!
Reply With Quote
  #14  
Old 01-06-2016, 00:13  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
valparra valparra is offline
Member
 
Join Date: Apr 2016
Posts: 22
Thanks: 3
Thanked 0 Times in 0 Posts
Default

Hi tarvi47

Thanks for your reply
I downloaded the image and followed olep instructions in this thread but although there was no apparant issues it has been on booting for about 30 /40 minutes
Is there a better way to load this?
thanks
Reply With Quote
  #15  
Old 01-06-2016, 08:53  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
tarvi47's Avatar
tarvi47 tarvi47 is offline
Member
 
Join Date: Jun 2008
Posts: 13
Thanks: 0
Thanked 4 Times in 2 Posts
Country: Country Flag
Default

Hi!

Step by step how to:

First install a multiboot as mbd said earlier if u do not have it already with your image (flash it like u r flashing a new image and remember to rename it as "usb_update.img". I know that a multiboot image comes with pgi image but you have to flash it separatly.

Get a usb stick, say 2, 4, 6 gb, etc.

Make partitions as you like but not less than 1gb for each partition, using the following commands via telnet:

fdisk /dev/sdb
Create 4 partition (exemple) at the USB stick with


n for new partition
w for saving the partition

Format each partition

If you have e2 in flash then,

mkfs.ext2 /dev/sdb1 -L ext2
mkfs.ext2 /dev/sdb2 -L ext2
mkfs.ext2 /dev/sdb3 -L ext2
mkfs.ext2 /dev/sdb4 -L ext2


FOR PGI IMAGES in flash:

mkfs.ext2 -I 128 /dev/sdb1 -L ext2
mkfs.ext2 -I 128 /dev/sdb2 -L ext2
mkfs.ext2 -I 128 /dev/sdb3 -L ext2
mkfs.ext2 -I 128 /dev/sdb4 -L ext2

mount /dev/sdb1 /mnt/usb

with FTP copy the image u want (anyimage.tar.gz) to /mnt/usb
TELNET
cd /mnt/usb
tar -vzxf anyimage.tar.gz
sync
rm anyimage.tar.gz
cd /
umount /dev/sdb1

Repeat this procedure for every partition with other images

exit telnet

Then, upon reboot press and hold the relevant number of the multiboot button on your remote control until you see multi or sdb1, 2,.. or Enigma (deppending on tha multiboot you have or just flashed), then wait a few more seconds and then release the remote button. if u have done everything right then it should boot into e2 image.

Good luck
Reply With Quote
The Following User Says Thank You to tarvi47 For This Useful Post:
valparra (01-06-2016)
  #16  
Old 01-06-2016, 15:00  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
valparra valparra is offline
Member
 
Join Date: Apr 2016
Posts: 22
Thanks: 3
Thanked 0 Times in 0 Posts
Default

Hi Thanks for your response
It did not work this is the l tried to install the image
I have a flash image of PGI 1.5.1 installed and then I installed a multiboot image (Multiboot IpBox serie 9xxx) which l downloaded some time back
I used a 4 gb,
Make partitions as you like but not less than 1gb for each partition, using the following commands via telnet:
fdisk /dev/sdb
Created 1 partition as only want an E2 image with PGi in flash
n for new partition
w for saving the partition

Format each partition
As I have PGi 1.5.1 final installed in flash

FOR PGI IMAGES in flash:
mkfs.ext2 -I 128 /dev/sdb1 -L ext2
mount /dev/sdb1 /mnt/usb

with FTP copy the image u want (anyimage.tar.gz) to /mnt/usb
TELNET
cd /mnt/usb
tar -vzxf anyimage.tar.gz
sync
rm anyimage.tar.gz
cd /
umount /dev/sdb1

exit telnet
I then restarted the power to the box holding 2 on the remote
Received multiboot 2 (boot from USB memory stick, with internal HDD)
on STB then booting and it goes no further

The only thing l can see wrong must be the multiboot image
I didn't understand mbd reply "D.L file.[ flash ver]" and installed

Can you see anything wrong
Thanks
Reply With Quote
  #17  
Old 01-06-2016, 19:33  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
valparra valparra is offline
Member
 
Join Date: Apr 2016
Posts: 22
Thanks: 3
Thanked 0 Times in 0 Posts
Default

Hi tarvi47
Started again and formatted the USB and followed your instructions and pleased to say it is loading E2
Now l have to get familiar with E2
Look to move forward and load oscam
Thanks for your help

Last edited by valparra; 01-06-2016 at 20:03..
Reply With Quote
  #18  
Old 18-12-2016, 00:18  Translate from English to Italian  Translate from English to French  Translate from English to German  Translate from English to Spanish  Translate from English to Dutch  Translate from English to Greek  Translate from English to Portuguese  Translate from English to Russian  Translate from English to Russian
Roko Roko is offline
Junior Member
 
Join Date: Mar 2009
Posts: 2
Thanks: 3
Thanked 0 Times in 0 Posts
Country: Country Flag
Default

I use PKT Hyperion 5.4, stable and fast
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 05:12.


Powered by vBulletin
Copyright ©2006-2016 - Sat Universe